02 Grade comparison

Corn zein grades: protein, fat, mesh and the film

Technical document 02 · Reviewed 2026-11-20 · Corn Zein

On this page
  1. Why a zein grade is a specification
  2. The catalog grade and the variants that need a new specification
  3. Solubility, film, colour and flow
  4. What the grade means in a capsule, tablet or coating
  5. What to write into the specification
  6. When a different grade is the wrong purchase

The catalog grade is one powder: ≥90.0% protein on the dry basis, fat ≤2.0%, ash ≤1.0%, moisture ≤8.0%, milled to 80 mesh, insoluble in water and soluble in aqueous alcohol. The grade questions that remain are granulation, mesh, the protein-to-fat balance and whether the material is zein at all. Corn protein peptides are a separate product, not a coarser or finer zein.

In one line

A zein grade is a protein figure with a basis, a fat ceiling, a mesh and a granulation, and each one changes how the powder films, flows or disperses.

Why a zein grade is a specification

“Corn zein” describes a protein family, not a single powder. Two suppliers can use the name for material from different corn fractions, dried on different lines and milled to different meshes. The protein figure can agree while the fat, the colour and the film behaviour do not. That is why the grade has to be a set of numbers.

The catalog grade fixes five lines: protein ≥90.0% on the dry basis by Kjeldahl with N × 6.25, fat ≤2.0%, ash ≤1.0%, moisture ≤8.0% and ≥95% through 80 mesh. A change to any one of them is a new specification, not a packing choice. The source matters too: zein is the prolamine fraction, and a corn protein peptide is a hydrolysate of a different material.

Zein is not a nutritional protein in the way a whey or soy isolate is: it is low in lysine and tryptophan, and its value is functional. Choose the grade for the function, not the protein percentage alone.

The catalog grade and the variants that need a new specification

Corn zein forms and what changes
FormWhat changesWhy a buyer asks
80 mesh powderThe catalog grade; no changeCapsules, tablets and powder blends
Granulated, on requestLarger particles, less dust, better flowBlending and capsule feeding
Different meshSieving, dust, wetting and film levellingA coating line or a suspension needs another particle size
Tighter protein or fat limitA different extraction target and yieldA film or a label needs a narrower window
Corn protein peptidesA hydrolysate; water-soluble, not a zein formA clear drink or a soluble powder blend

The third row is a milling change: the chemistry stays the same, while the sieve result, the dust and the wetting change. The fourth row is a process change: a higher protein floor or a lower fat ceiling comes from the extraction and the wash, not from a sieve. The fifth row is a different product.

Granulation is a separate specification even when the chemistry is identical.

Solubility, film, colour and flow

Zein is insoluble in water and soluble in aqueous ethanol or aqueous isopropanol. That property explains most of the grade choice: a film is cast from an alcohol solution, a coating is applied from an alcohol system, and a powder blend that meets water will not dissolve.

The film is the reason the material is bought. Zein films are hydrophobic, grease-resistant and a good oxygen barrier. They are also brittle without a plasticiser, so glycerol or propylene glycol is added; the plasticiser level changes the film more than the mesh does. A film grade should be qualified on the film, not only on the powder certificate.

An 80 mesh powder passes about 177 µm. At that size it flows reasonably but dusts when poured, and dust is material that can segregate in a blend or settle on a coating line. Granulation reduces the dust and improves flow; the trade-off is a slower wetting step and a different sieve result. The powder is hygroscopic, and a fine grade takes up moisture faster than a granulated one.

The catalog appearance is off-white to cream. The colour moves with the corn source, the extraction and the drying step, and a shade inside the range is not a grade failure. Colour and odour still matter in a capsule or a plain powder blend, where no flavour system covers them.

What the grade means in a capsule, tablet or coating

A capsule takes the 80 mesh powder directly. The fill weight is set by the bulk density and the target zein amount, and the capsule shell needs a dry room because the powder is hygroscopic. A granulated grade can improve flow, but it changes the fill weight for the same volume, so the label dose has to be recalculated.

A tablet coating is a different calculation. The zein is applied as a film from an alcohol or aqueous-alcohol system, and the add-on is a small percentage of the tablet weight. The grade question is the film's adhesion, gloss and barrier. A coating trial should measure the add-on, the film appearance and the disintegration time, because a hydrophobic film can slow the latter.

A film on confectionery or nuts is a surface-finishing application, and the add-on is chosen for gloss, grease resistance and moisture transfer. A powder blend takes the grade that matches the other ingredients in particle size, so the blend does not segregate. A stick pack is the wrong format for zein unless the powder is dispersed in an alcohol-containing system or used as a coating rather than a drink ingredient.

Zein is low in lysine and tryptophan, so it is not a complete protein. A label that presents it as a protein source is making a claim the amino acid profile does not support; the function is the film, and the label should say so.

What to write into the specification

  • “Corn zein, CAS 9010-66-6, source Zea mays; state the corn fraction and the extraction route.”
  • “Protein ≥90.0% by Kjeldahl, N × 6.25, dry basis; state the factor and the basis.”
  • “Fat ≤2.0%; ash ≤1.0%; moisture ≤8.0%; appearance off-white to cream.”
  • “Identification by protein profile; state the reference pattern or method.”
  • “Particle size ≥95% through 80 mesh; granulated on request as a separate line.”
  • “Solubility: insoluble in water, soluble in aqueous alcohol; name the test solvent.”
  • “Residual solvent, heavy metals, microbiology and allergen statement as agreed for the destination.”

A specification that lists only “corn zein 90%” has left the basis, the fat, the mesh and the solvent open. The product hub carries the catalog values; the COA page shows how each line is reported; the zein versus corn peptide comparison covers the material choice; the methods library explains the analytical options; the quality page describes the release file.

When a different grade is the wrong purchase

A granulated grade is the wrong choice when the process needs a fine powder to suspend or to coat evenly. A finer mesh is the wrong choice when dust and flow are the problem. A tighter protein limit is the wrong upgrade when the fat rises with it and the film loses its barrier.

The clearest wrong purchase is a different material under the same name. Corn gluten meal carries more fat and fibre and does not film in the same way; corn protein peptides are water-soluble and are not a zein. Neither becomes zein because the certificate says “corn protein”.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation