03 Stability

Colostrum stability: why the IgG figure falls first

Technical document 03 · Reviewed 2026-11-19 · Colostrum

On this page
  1. The powder: water activity, browning and fat
  2. The solution is the harder format
  3. What drives the loss
  4. A stability protocol for the ingredient
  5. The finished formula changes the answer
  6. How the shelf life is set

Bovine colostrum powder loses IgG faster than it loses protein. Moisture and heat are the two drivers, the powder picks up water from a humid room, and the immunodiffusion result falls while the Kjeldahl figure stays where it was. The powder holds its IgG longest in a sealed foil pack at ambient temperature; a solution and a hot process step are the formats that cost it.

In one line

Protein survives storage better than IgG: moisture and heat lower the immunodiffusion result while the Kjeldahl figure barely moves, so the shelf life belongs to the IgG test.

The powder: water activity, browning and fat

Moisture is capped at 7.0% at release, and that figure is a gate the lot has to pass, not a budget the powder can spend in storage. Once the pouch is open, the powder equilibrates with the room. Water activity rises, the powder turns cohesive, and the reactions that cost quality begin: IgG unfolding and aggregation, browning between the lactose and the protein, and oxidation of the residual fat.

Browning is the colostrum-specific route. The powder carries a reducing sugar and a high protein concentration in the same particle, and the two react faster as water activity and temperature rise. The visible sign is a darker tan powder; the analytical sign is a lower soluble protein and a changed colour. A pack that holds the water activity down slows the reaction until it is no longer the limiting factor.

Fat is the other route. At the ≤5.0% limit there is still enough lipid for a lipase or an oxidation off-odour to develop in a warm store. Odour is the first signal on this material, and a trained nose is worth more than a peroxide value.

Folding an opened pouch over is not the same as the heat seal it arrived with: the headspace now holds room air. Decant the remainder into a small opaque container, or use it inside the stated in-use period.

The solution is the harder format

In water the IgG meets heat, pH, shear and time at once. A pasteurisation step or a hot fill adds a heat load that the powder never sees, and the immunodiffusion result after that step can sit well below the figure on the incoming certificate. The solution is also slightly turbid, which is expected: the protein and the residual fat do not give a clear liquid.

If a liquid is the target, keep the heat load as short as the process allows, hold the pH away from the extremes, fill clean and cold, and validate the hold time before the filler starts. A stability result from another matrix does not transfer. The drink has its own pH, its own process and its own pack, and its shelf life has to be measured in the drink.

What drives the loss

Factors that move colostrum powder and its solution
FactorWhat it doesControl
HeatUnfolds IgG; the immunodiffusion result falls before protein doesLow-temperature process; cool store
MoistureRaises water activity; caking and browningSealed pouch; dry room; desiccant where needed
Water activity in the matrixDrives browning in a bar or a stick blendFormulate below the critical range
OxygenOxidation of the residual fatLow headspace; sealed pack
Shear and foamUnfolds protein at the air interfaceLow-shear transfer; avoid over-mixing
Metal ionsColour and flavour change in solutionStainless contact; no iron or copper
LightOff-flavour in a clear packOpaque or foil pack

The factors compound. A warm, humid store costs more than heat and moisture counted separately, and a clear bottle of solution left on a bench adds light to the same hour.

A stability protocol for the ingredient

Name the pack, the condition, the time points and the tests before the study starts. 25 °C/60% relative humidity is the long-term arm and 30 °C/65% relative humidity the intermediate one; 40 °C/75% relative humidity accelerates the pack and gives the earliest signal on the IgG.

Test IgG by radial immunodiffusion, protein by Kjeldahl, fat, lactose, moisture, water activity, appearance and odour, and microbiology at each point. The IgG decides the retest period; the other parameters explain why it moved. Report the individual results rather than a pass statement, and identify the pack and the lot family in the report.

Request the file for the pack on the order: a pouch and a drum differ in headspace, in opening history and in surface-to-volume ratio, so the data belongs to the pack rather than to the product family.

The finished formula changes the answer

A capsule or a tablet is the gentlest format: low water activity, no heat in the fill, and a shell that keeps air away from the powder. The risk is the excipient. A hygroscopic filler or a wet granulation step can raise the water activity inside the shell, so check the moisture of the blend and not only of the incoming powder.

A stick pack depends on the foil and the seal. A pinhole is a failure, and a stick stored in a warm, humid place shows caking before it shows a lower IgG. A protein bar is the hardest matrix: water activity, mixer shear and ambient shelf life all work against the IgG, and a bar needs its own study.

A ready-to-drink product puts the heat step back into the process. If the fill is hot, the IgG loss happens during manufacture, and the storage study measures what is left rather than what was added.

How the shelf life is set

There is no single shelf-life figure for colostrum powder: the pack and the storage condition decide the retest period, and the figure belongs on the specification with its condition beside it. A period quoted without a pack is a claim rather than a shelf life.

Past the retest period, re-assay the retained sample before extending use, and extend on the IgG result. An assumption is not a basis for extension, and a bulk figure does not follow the powder into a repacked container. The product hub lists the standard packs, the COA page covers the release tests, the MOQ page covers pack and lead time, the assay notes sit under methods, and the quality page covers release and retention.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation