02.1 CBP vs colostrum

Colostrum basic protein vs whole colostrum: the fraction and the powder

Technical document 02.1 · Reviewed 2026-11-19 · Colostrum Basic Protein

On this page
  1. The fraction and the whole powder
  2. The two specifications side by side
  3. The arithmetic that decides the fill
  4. What the label has to say
  5. When to choose each
  6. What changes when you switch

Colostrum basic protein and whole colostrum powder come from the same first milking and carry the same milk allergen, but they are different specifications. The fraction is specified at ≥80.0% protein, ≥10.0% IgG and ≤5.0% ash; the whole powder at ≥70.0% protein, ≥20.0% IgG, ≤5.0% fat and ≤5.0% lactose. Neither is a stronger version of the other: one buys protein density, the other buys IgG density.

In one line

The fraction and the whole powder are two specifications from one raw material: the basic-protein fraction trades IgG density for protein density, and the label has to name the one in the pack.

The fraction and the whole powder

The basic-protein fraction is made by cation exchange. At the loading pH, the basic proteins of colostrum — lactoferrin, lactoperoxidase and part of the IgG — carry a net positive charge and bind the resin, while most whey proteins, lactose and minerals pass through. The bound proteins are eluted with a salt solution, concentrated and dried. Whole colostrum powder is the first milking separated and dried, with no fractionation step; it keeps the fat and lactose that the fraction largely leaves behind.

The names are not interchangeable. “Colostrum” is the whole secretion; “colostrum basic protein” is a fraction of it. A specification that says only “colostrum protein” has not said which one, and the two powders behave differently in a fill weight, a solution and a label.

The two specifications side by side

Colostrum basic protein against whole colostrum powder
LineColostrum basic proteinWhole colostrum
Ingredient nameColostrum basic proteinColostrum
Protein (as-is)≥80.0%≥70.0%
IgG≥10.0%≥20.0%
IgG per 100 g protein at the minimums12.5 g28.6 g
Ash≤5.0%—
Fat—≤5.0%
Lactose—≤5.0%
Moisture≤7.0%≤7.0%
Particle size≥95% through 80 mesh≥95% through 80 mesh

The table explains why the two cannot be swapped on the protein number alone. The fraction has the higher protein floor, but at the specification minimums it carries 12.5 g of IgG per 100 g of protein against 28.6 g for the whole powder. The missing lines matter too: the fraction caps ash and the whole powder caps fat and lactose, so each specification answers a different set of label questions.

The arithmetic that decides the fill

Per 100 g, the fraction carries 80 g of protein including 10 g of IgG; the whole powder carries 70 g of protein including 20 g of IgG. To put 5 g of IgG into a batch takes 50 g of the fraction or 25 g of the whole powder. The protein that arrives with it is 40 g in the first case and 17.5 g in the second.

That is label arithmetic, not a dose. The point is that the fraction is not an IgG concentrate: it is a protein concentrate that retains IgG at a lower share. A formula that needs both a high protein figure and a high IgG figure may need a blend, a different fraction or a larger fill weight, and the label has to be built from the arithmetic rather than from the ingredient name.

The ash and the absent fat and lactose lines carry the same weight as the protein. The fraction's 5.0% ash cap is the residue of the salt elution; a lot close to the cap with protein at the floor is mostly salt and protein. The whole powder has no ash line but answers the fat and lactose questions that the fraction's catalog leaves open. If the label declares either, the choice is made for you.

What the label has to say

The ingredient list has to name the material in the pack. “Colostrum basic protein” describes the fraction; “colostrum” describes the whole powder. A label that says colostrum while the pack is the fraction overstates the IgG per gram; a label that says basic protein while the pack is whole powder understates it and misnames the ingredient. The two statements are not two ways of saying the same thing.

Milk is a major allergen in every market that lists it, and both products are milk-derived. The allergen statement names milk and the species is bovine. Fractionation does not remove the allergen, and “purified” or “fractionated” is not an allergen-free statement. The specification, the certificate and the label should use one ingredient name and one allergen wording.

When to choose each

Choose the fraction when the formula is protein-led: a capsule with a fixed fill weight, a tablet that needs a high protein load, a stick pack where fat and lactose would change the mouthfeel, or a blend where the protein figure is the claim. Its slightly turbid solution and low fat make it easier to disperse in water than the whole powder.

Choose the whole powder when IgG per gram is the target and the fat and lactose can be declared and tolerated. It is the simpler ingredient to explain on a label that already says colostrum, and its specification carries the fat and lactose figures that the fraction's catalog leaves open. A dairy-style drink or a rich powder stick may prefer it for the mouthfeel as much as for the IgG.

What changes when you switch

A switch in either direction is a specification change, not a substitution at the weigh-up. Re-check the protein and IgG figures against the fill weight, the ash and the fat and lactose data, the allergen statement, the stability of the new powder in the pack, and the label name. Run a sensory check as well: colour, taste and solubility differ between the two powders, and a capsule or stick pack that tasted neutral with one may not with the other.

The product page carries the catalog range; the grade page puts this comparison beside the other grades; the colostrum page covers the whole powder; the lactoferrin page covers the single-protein alternative; the methods library covers the assays; and the quality page covers release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation