01 COA & batch testing

What the COA for colostrum basic protein reports

Technical document 01 · Reviewed 2026-11-19 · Colostrum Basic Protein

On this page
  1. Reading the sheet line by line
  2. Protein basis, the nitrogen factor and IgG
  3. Limit and result
  4. Batch-to-batch variation
  5. Outside testing
  6. Supplier comparison

A colostrum basic protein lot is released on a certificate that reports protein by Kjeldahl, IgG by a specific immunoassay, ash, moisture, appearance, the heavy-metal panel, microbiology and particle size. Protein and IgG are not two views of one measurement: the first counts nitrogen, the second counts one class of antibody. Ash is the third figure that decides whether the powder is the fraction it claims to be, because the ion-exchange step that makes the fraction can leave salt behind.

In one line

The certificate stands on three figures that measure different things: protein by nitrogen, IgG by a specific immunoassay, and ash from the salt that the fractionation leaves behind.

Reading the sheet line by line

Read the sheet as a chain rather than a list. A result means something only when the method, the limit and the units sit beside it, because a number without its method cannot be checked. “Conforms” on its own is a verdict with the working hidden. The table below is the catalog sheet for this grade; the lot certificate is where one batch's numbers appear.

Release specification · colostrum basic protein
ParameterMethodRelease limit
AppearanceVisualOff-white to light tan powder
IdentificationProtein and peptide profileConforms to the reference
Protein (as-is)Kjeldahl, N × 6.38≥80.0%
IgGSingle radial immunodiffusion≥10.0%
AshGravimetric, 550 °C≤5.0%
MoistureLoss on drying≤7.0%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent
Particle sizeSieve analysis≥95% through 80 mesh

The identification line is deliberately a profile rather than a single peak. A basic-protein fraction contains several proteins, and a pattern that shows the expected proteins says more than one retention time copied from a reference.

Protein basis, the nitrogen factor and IgG

The protein figure is the one most often quoted without its basis. For a milk protein the Kjeldahl nitrogen is multiplied by 6.38, not by the 6.25 used for many plant proteins. A lot that measures 12.62% nitrogen is 80.5% protein with the dairy factor and 78.9% with the general factor — a 1.6-point difference that can decide a release against a ≥80.0% gate.

The second basis is moisture. The catalog writes protein as-is, on the powder as received. The same 80.5% result at 5.8% loss on drying is 85.5% on the dry basis. A certificate that reports dry basis is not wrong, but it cannot be compared with an as-is figure without the moisture number beside it. Put the basis on the assay line itself; a footnote is easy to miss.

IgG is reported as-is too, and it is measured by radial immunodiffusion, an antibody-specific method. It counts the IgG that reacts with the antiserum; it does not count total protein and it does not measure lactoferrin. Protein and IgG answer separate questions, which is why the specification carries both and why one cannot be substituted for the other.

Limit and result

Two columns do different jobs. The limit records what was agreed for the grade; the result records what this lot actually measured. When the two are identical on every line, the certificate has been copied from the specification rather than written at the bench, and it says nothing about the batch.

What the result column should contain
ParameterRelease limitResult column
Protein≥80.0% as-is, N × 6.38A measured percentage and the nitrogen figure behind it
IgG≥10.0%A measured percentage with the standard and the dilution
Ash≤5.0%A measured percentage
Moisture≤7.0%A measured percentage
Heavy metalsPer elementA figure in mg/kg for each element

A pass statement closes the argument; it does not replace it. Microbiology needs a count and an absence result, and the metals need one figure per element, because a single total hides which metal is high. An IgG result without its standard and dilution is hard to defend if the lot is later disputed.

Batch-to-batch variation

Colostrum is a biological raw material. The IgG load falls quickly in the days after calving, and it varies with parity, season and the pooling of the milking. A supplier controls it by collecting early, pooling to a target and testing the pooled lot; the certificate shows the result, not the collection window.

Ash moves with the ion-exchange elution and the membrane step. A lot eluted with more salt, or washed less thoroughly, carries more ash and less protein in the same weight. The heat load moves IgG and colour: a hotter drying step gives a darker powder and a lower IgG figure while the protein line still passes. Milling moves the 80 mesh result without changing the chemistry.

Read the lots as a series rather than one at a time. Follow the IgG-to-protein ratio, the ash figure and the colour together; a ratio that falls while ash climbs points at the fractionation, not at the raw milk.

Outside testing

Outside testing earns its place at four moments: a new supplier, a first entry into a regulated market, an IgG result the two sides read differently, and a fraction claim that the certificate does not actually support. The panel should answer the open question instead of repeating the whole sheet. For the fraction, that means protein by Kjeldahl plus an amino-acid analysis to show the nitrogen is protein nitrogen, IgG by radial immunodiffusion and, if contested, by affinity HPLC, with ash, moisture, ICP-MS and the microbiology set alongside.

Add lactoferrin by HPLC when the fraction itself is in question. The catalog does not set a lactoferrin limit, so the figure is evidence about the process rather than a release gate; a powder sold as a basic-protein fraction should show the basic proteins, not only total protein. A screen without a detection limit cannot be read, so ask for the limit on every line. Keep the laboratory sample tied to the lot code so a referee can retest the same powder.

Supplier comparison

Compare six lines, not one: the declared name and species; protein with its nitrogen factor and basis; IgG with its method; ash and moisture; the metals and microbiology; and the pack, lot code and allergen statement. Two offers can agree on protein and still describe different powders if the IgG method or the nitrogen factor differs.

The catalog range is on the product page. The tests that separate the fraction from a blend are on the identity page, the alternatives on the grade page, the Kjeldahl and chromatography background in the methods library, and the release route on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation