05 Compliance

The regulatory file for tricalcium phosphate

Technical document 05 · Reviewed 2026-11-20 · Tricalcium Phosphate

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Claims and the label name
  6. Documents for the file
  7. Checklist before the first order

Tricalcium phosphate is used as a calcium and phosphate source in food and supplements, and the file has to name the salt, the ratio and the route. The catalog specification and the batch COA describe the material; the destination rules and the finished-product label decide whether it can be sold. The buyer's regulatory team confirms that route.

In one line

The file has to show which calcium phosphate is in the pack, at what calcium and phosphorus content, and which market route the finished product takes.

What the file contains

The file holds four things: the specification version for tricalcium phosphate, the certificate for the lot, the destination rules and label requirements, and the change record for source, phase and pack. The certificate, the technical data sheet and the safety data sheet each answer a different question, and none of them states the market route. That is recorded separately by the buyer's team.

Keep a versioned document list at the front. The specification revision on the quotation, the certificate and the label should be the same revision; a label written against an older calcium window is a recall risk, not a paperwork detail.

European Union

In the EU, the food-additive route runs through E 341(iii), one of the three calcium phosphate entries in Regulation (EC) No 1333/2008: E 341(i) monocalcium, E 341(ii) dicalcium and E 341(iii) tricalcium. The additive specification sits in Regulation (EU) No 231/2012, as amended. That specification defines E 341(iii) as a variable mixture of calcium phosphates obtained by neutralising phosphoric acid with calcium hydroxide or calcium carbonate. The permitted food categories and maximum levels are in Annex II to Regulation 1333/2008, and the buyer's team checks the category for the finished product.

Food supplements add Directive 2002/46/EC and its permitted-source list; labelling follows Regulation (EU) No 1169/2011, including the calcium and phosphorus entries in the nutrition declaration and their reference intakes; contaminants follow Regulation (EU) 2023/915. This is as of this review, and the current consolidated texts govern.

For the United Kingdom, Great Britain uses assimilated law and Northern Ireland follows the EU framework. The delivery address decides which file applies, and the buyer records that decision with the order.

United States

In the United States, calcium phosphate is listed as GRAS for the mono-, di- and tribasic forms at 21 CFR 182.1217, for use in accordance with good manufacturing practice. That listing covers the family, not a specific ratio, so the ingredient statement still has to name tricalcium phosphate and the specification still has to fix the calcium and phosphorus figures.

A supplement is also a dietary supplement under DSHEA, made under the cGMP rule at 21 CFR 111, with a Supplement Facts panel under 21 CFR 101.36. Calcium is a mandatory panel nutrient; phosphorus is not in the mandatory list, so the phosphorus that arrives with the salt may not appear unless the label declares it. State requirements can add a warning or a limit.

Contaminants and limits

The catalog limits are release gates for the powder. The finished-product limit is a calculation: the daily dose of the powder divided into the daily intake of the supplement. A lot that meets the powder gate can still exceed a finished-product limit at a high daily dose.

Contaminant limits to carry into the finished-product file
ParameterCatalog limitWhat the file should show
Lead (Pb)≤3 mg/kgLot result, method and the finished-product calculation
Arsenic (As)≤2 mg/kgLot result and the destination limit, where one is set
Cadmium (Cd)≤1 mg/kgLot result and any category exception that applies
Mercury (Hg)≤0.1 mg/kgLot result and method
FluorideNot in the catalog panelThe destination limit and the method, when one applies
MicrobiologyAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/gThe count and the absence statement for the lot

Fluoride is the line most often missing from a calcium phosphate file and most often asked for by a buyer who knows the phosphate source. Ask for it when the destination sets a limit, and record the method and the result with the rest of the panel.

Claims and the label name

The claims file is separate from the specification. In the EU, calcium and phosphorus have authorised claims under Regulation (EC) No 1924/2006, each with a condition of use, usually that the product is a source of the nutrient. The brand's reviewer selects the wording and checks the condition against the daily dose.

In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. No disease claim is open in either market, and this page makes no health claim. On the label, the ingredient name should be the specific salt, “tricalcium phosphate”, not “calcium phosphate” alone, because the generic name leaves the reader unable to tell which ratio was used.

Documents for the file

The file needs the COA with calcium and phosphorus on a stated basis, the calculated ratio, loss on drying, the metal panel and the microbiology; the specification with CAS 7758-87-4, the grade and the ratio window; the TDS and the SDS; allergen and GMO statements; the origin and the manufacturing source; the particle-size and pack declaration; and the change-control record for source, phase and pack.

Add the fluoride statement when the destination requires it, and the additive or nutrient route the buyer relies on. An allergen statement for a mineral salt is short, but the file should still carry it rather than leave the question open.

Checklist before the first order

  • Specification version, CAS number and grade are named.
  • COA, TDS, SDS, allergen, GMO, origin and particle-size documents are on file.
  • Calcium and phosphorus are reported on the same basis, with the ratio calculated.
  • The contaminant results are converted to the finished-product dose.
  • The label name, the additive entry and the claims have been reviewed for the destination.
  • Source, phase and pack are under change control.

The product hub carries the catalog figures; the COA page shows where each figure sits; the identity page covers the ratio and the phase; the methods index describes the assays; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation