05 Compliance

Where L-selenomethionine is permitted, and what the file must show

Technical document 05 · Reviewed 2026-11-19 · L-Selenomethionine

On this page
  1. Four questions, not one
  2. The European Union
  3. The United States
  4. Contaminant ceilings
  5. What the label may say
  6. The file a brand needs
  7. A file checklist

L-selenomethionine is a permitted selenium form for food supplements in the EU, listed by name in Annex II to Directive 2002/46/EC; it is sold in the US as a dietary ingredient and in the UK under the retained version of the same directive. Permission is only the first check. The dose, the contaminant ceiling, the ingredient-list wording and the claim are four separate questions.

In one line

Permitted form, permitted amount, contaminant ceiling and label wording are four separate checks, and the file has to answer each one for the market on the label.

Four questions, not one

The first question is whether the form may be used at all. The second is how much selenium the finished product may deliver in a day. The third is what else may be in the powder, as ceilings on lead, arsenic, cadmium and mercury. The fourth is what the pack may say. Each has a different legal instrument and a different document as evidence.

Keeping them apart prevents the common mistake of reading a permitted form as permission for any dose, or a compliant dose as permission for any wording. A product can pass the first three checks and still fail on the label.

The European Union

Directive 2002/46/EC lists the vitamins and minerals permitted in food supplements in Annex I and the permitted forms in Annex II. Selenium is in Annex I; Annex II names L-selenomethionine alongside selenium-enriched yeast, selenious acid, sodium selenate, sodium hydrogen selenite and sodium selenite. The lists were amended by Regulation (EC) No 1170/2009; check the consolidated text, as of this review.

The yeast entry is not the same permission. Its Annex II footnote caps the selenium at 2.5 mg Se/g in the dried product and describes the species distribution, with selenomethionine as the predominant species. A yeast at 1,800–2,200 mg/kg sits below that ceiling; one boosted above it would not meet the entry.

Nutrition labelling follows Regulation (EU) No 1169/2011: selenium is declared with its reference value of 55 µg/day for an adult. The tolerable upper intake level used in the EU is 300 µg/day, so a supplement at 55 µg leaves room for the diet and for a second selenium source. Northern Ireland applies the EU regime under the Windsor Framework, so a GB-only label cannot simply be shipped across.

The United States

In the US, selenium is a dietary ingredient and L-selenomethionine sits under the dietary supplement framework rather than the food additive framework. The form must either have been marketed before 15 October 1994 or be covered by a new dietary ingredient notification under 21 CFR 190.6. A specification sheet that does not say which basis applies leaves the brand to prove it.

The Supplement Facts panel declares selenium in micrograms and as a percentage of the Daily Value, 55 µg for adults. The ingredient list names L-selenomethionine. The tolerable upper intake level used in the US is 400 µg/day, higher than the EU figure, but that does not make a product portable between markets.

Structure and function statements are permitted only with the DSHEA disclaimer and only when they are truthful and not misleading. A disease claim is outside the framework in both markets.

Contaminant ceilings

Heavy metals · EU food-supplement ceiling and catalog limit
ElementEU ceiling in food supplementsCatalog limit, L-selenomethionine
Lead (Pb)3.0 mg/kg≤3 mg/kg
Cadmium (Cd)1.0 mg/kg, 3.0 mg/kg for seaweed-based supplements≤1 mg/kg
Mercury (Hg)0.10 mg/kg≤0.1 mg/kg
Arsenic (As)No harmonised EU level for supplements; national rules apply≤2 mg/kg

The ceilings come from Regulation (EC) No 1881/2006, consolidated in Regulation (EU) 2023/915, and they apply to the food as sold rather than to the raw material. At 0.14 mg of L-selenomethionine per capsule, a lead result at 3 mg/kg contributes well under a nanogram of lead to the finished capsule, so this material is rarely the binding constraint; the practical work is on the excipients, the shell and the water.

Microbiology follows the same logic. The catalog limits — APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent — are raw-material limits, and the finished product carries its own. The methods are described in the ICP-MS note and the microbiology note.

What the label may say

The ingredient list names the form: “L-selenomethionine” in the EU and the UK, with selenium also declared in the nutrition table. “Selenium” alone describes the nutrient, not the ingredient.

“Organic selenium” is a chemistry description and a labelling hazard. In EU law “organic” refers to organic farming under Regulation (EU) 2018/848, and a consumer label that uses the word for an added amino acid invites a misdescription finding. Technical documents may describe the carbon-bound form; the pack should name the molecule.

Any nutrient claim has to be on the authorised list with its conditions of use, and a claim written for one selenium form should not be assumed to fit another. This page does not restate the authorised wording and makes no disease claim. A claim is a separate review with its own evidence file.

The file a brand needs

Six documents carry most of the weight: the specification sheet; the certificate of analysis for the lot; the safety data sheet; the allergen and composition statements, including whether the material is fermentation-derived; the contaminant and microbiology methods; and the stability data behind the shelf life. Add the origin statement and the manufacturing flow chart.

Two declarations are easy to forget: that the material has not been irradiated and that it has not been treated with ethylene oxide. Both belong in the file before the first audit.

The batch results behind these documents are on the COA page. The presentation choices are on the grade page; ordering logistics are on the ordering page. The catalog specification is published on the product page. The market summaries are on the EU, US and UK regulatory pages, and the 55 µg reference value is in the NRV note.

A file checklist

Six checks before a label is released
CheckEvidence
Form permitted in the destination marketAnnex II listing, or the US basis for the dietary ingredient
Ingredient list names the formApproved artwork against the certificate
Daily selenium against the reference value and the upper levelDose calculation from the assay and the selenium result
Contaminant results inside the ceilingsLot COA plus the finished-product test
Claim on the authorised list, with its conditionsClaims file, signed off before artwork release
Documents complete and currentSpecification revision, SDS version, statements dated

Six checks, six pieces of paper. A file that can produce them on request is a file that survives an audit; a file that answers with a product name is a file that has not been built yet.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation