02 Grade comparison

L-selenomethionine, selenium yeast or selenite: choosing a selenium source

Technical document 02 · Reviewed 2026-11-19 · L-Selenomethionine

On this page
  1. Why the source is the grade
  2. The three sources side by side
  3. What each source does in the plant
  4. What the dose does to the fill weight
  5. What the specification has to name
  6. When not to switch source

Three selenium sources are sold into supplements: L-selenomethionine at 39.0–41.0% selenium, selenium-enriched yeast at roughly 1,800–2,200 mg/kg, and sodium selenite at about 46% as the anhydrous salt. They differ by about two hundredfold in selenium concentration, they carry the element in different chemical surroundings, and they appear under three different names in law. The dosage form and the label decide which one fits before the assay does.

In one line

Selenium yeast at about 0.2%, L-selenomethionine at 40% and sodium selenite at 45%: the concentration decides which one your dosing line can actually weigh.

Why the source is the grade

L-selenomethionine is one molecule with one specification, so there is no purity ladder to choose from. What a buyer chooses is the source of the element, and then the presentation of the chosen source: crystal at 40 mesh, milled to 80 mesh, or diluted onto a carrier. That is why the comparison on this page is a comparison of sources rather than of grades.

The three sources are not interchangeable in a formula, in a label or in a laboratory. A certificate for one does not describe the others, an assay for one does not transfer to the others, and a dose written for one is wrong for the other two by one to two orders of magnitude.

The three sources side by side

Selenium sources · concentration, species and legal name
SourceSeleniumChemical settingLabel ingredient
L-selenomethionine39.0–41.0%Organic selenium bound in an amino acid, one atom per moleculeL-selenomethionine
Selenium-enriched yeast1,800–2,200 mg/kgOrganic selenium incorporated into yeast protein, mostly as selenomethionine and selenocysteine, with a residual inorganic fractionSelenium-enriched yeast, with the species named
Sodium seleniteabout 45.6% anhydrous, about 30.0% as the pentahydrateInorganic selenite, Se(IV), as a simple saltSodium selenite

Concentration is the first practical difference. One gram of L-selenomethionine carries about 0.4 g of selenium; one gram of yeast carries about 0.002 g; one gram of anhydrous selenite carries about 0.46 g. Put the other way round, the yeast needs roughly two hundred times the mass of L-selenomethionine to deliver the same selenium.

The chemical setting is the second difference, and it is the one that drives the paperwork. In L-selenomethionine the selenium sits inside a defined amino acid, so a single assay, a single selenium figure and a rotation describe the material completely. In yeast the selenium is distributed across protein-bound species plus a residual inorganic fraction, so the total selenium figure is only the start; the speciation is what describes the ingredient.

What each source does in the plant

L-selenomethionine arrives as a white to off-white crystalline powder that dissolves in water to a clear, colourless solution, with a standard presentation of ≥95% through 40 mesh. Milling to 80 mesh is available and helps when the material has to be distributed through a small blend. Because so little is used per batch, dust control and segregation matter at the weighing station.

Selenium yeast is a yellow to light brown powder with a protein content above 40% and a moisture limit of ≤6.0%. It is dispersible rather than soluble; the yeast matrix does not give a clear solution. It also brings yeast protein and a higher microbial load into the formula, which the file has to state.

Sodium selenite is a white crystalline solid, freely soluble, and the smallest mass per dose of the three. It is also the form with the least forgiving handling profile: the concentrated salt is toxic by ingestion, so the weighing step needs containment, which is why most production uses a pre-diluted grade rather than the pure salt.

Dilution is the common answer for all three. At the doses selenium is used at, no factory weighs the pure material into a capsule blend; a 1% or 0.1% trituration on a declared carrier is what reaches the blender. On the L-selenomethionine specification, dilution is offered on request, and the carrier has to be named on the certificate because it changes the selenium figure and the label.

What the dose does to the fill weight

Mass required for 55 µg of selenium
SourceMass for 55 µg SeShare of a 300 mg fill
L-selenomethionineabout 0.14 mgabout 0.05%
Selenium-enriched yeastabout 27.5 mgabout 9%
Sodium selenite, anhydrousabout 0.12 mgabout 0.04%

The arithmetic explains most of the formulation behaviour. At 0.05% of the fill, L-selenomethionine cannot be weighed per batch and cannot be distributed evenly by simple blending; it needs a premix step, and the premix needs its own uniformity check. The yeast, at about 9% of the fill, can be weighed directly, which is one reason it suits small production runs and simple blends.

Move the other way and the constraint changes. A high-selenium capsule with a small fill weight has no room for 27.5 mg of yeast but plenty of room for 0.14 mg of L-selenomethionine; a powder stick with a 5 g fill can carry either. The European labelling reference value for selenium is 55 µg per day, so the dose per portion is decided by the label claim, not by the source.

What the specification has to name

  • “L-selenomethionine, CAS 3211-76-5, C5H11NO2Se; assay 97.0–103.0% as-is by HPLC; selenium 39.0–41.0% by ICP-MS.”
  • “Specific rotation +17.0° to +19.5°, with temperature, concentration and solvent stated.”
  • “Loss on drying ≤0.5%; ≥95% through 40 mesh; heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg.”
  • For yeast: “Selenium 1,800–2,200 mg/kg; protein ≥40%; speciation by HPLC-ICP-MS with the selenomethionine fraction reported.”
  • For any dilution: “Carrier named; selenium figure stated on the diluted material, not only on the concentrate.”

A specification that names only “selenium 40%” has not named a material. The selenium figure alone can be met by the wrong molecule, the wrong enantiomer or a blend of two sources, and the rest of the specification is what closes those routes.

When not to switch source

Switching source is a revalidation, not a substitution. The fill weight changes, the label ingredient changes, the assay method changes, the stability profile changes and the microbial and allergen declarations change. A formula validated on L-selenomethionine cannot be moved to yeast without re-checking dose uniformity, because the mass per capsule rises by about two hundredfold.

There are also good reasons to stay where you are. A label that already names one source, a stability study built around one matrix, and a market file that lists one form are all reasons to keep the source and change something else. The comparison of the two organic sources has its own page: L-selenomethionine versus selenium yeast.

The legal name for each source is listed in the Annex II glossary entry, and the market-by-market rules are on the compliance page. The certificate lines are set out on the COA page, the yeast specification is on the selenium yeast page, and the 55 µg reference value is explained in the NRV note.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation