Selenium glycinate vs selenomethionine: the form and the label
Selenium glycinate is a chelate specified at 1.0–2.0% selenium, with glycine as the ligand and a carrier that makes up most of the powder. L-Selenomethionine is a single amino acid at 39.0–41.0% selenium, CAS 3211-76-5, with a specific rotation and a named entry on the EU permitted-forms list. The two deliver the same element, but the material per dose, the identity tests and the label are different.
Selenium glycinate is a chelate specified at 1.0–2.0% selenium; L-selenomethionine is a single amino acid at 39.0–41.0% selenium, and the difference reaches the label, the weigh-up and the market file.
A chelate and a molecule
L-Selenomethionine is a defined compound: selenium replaces the sulfur of methionine, the formula is C5H11NO2Se, and the L form rotates polarised light. Selenium glycinate is a complex of selenium with glycine on a carrier; the catalog lists no CAS number or formula for it, because the selenium load and the carrier are set by the specification rather than by one structure. That is the first difference, and it drives the rest.
| Property | Selenium glycinate | L-Selenomethionine |
|---|---|---|
| Article | Chelate of selenium with glycine on a carrier | Single seleno-amino acid |
| CAS number | — (not assigned in the catalog) | 3211-76-5 |
| Formula | — (no formula in the catalog) | C5H11NO2Se |
| Selenium | 1.0–2.0% by ICP-MS | 39.0–41.0% by ICP-MS |
| Identity basis | Glycine ratio and speciation | Assay, IR, specific rotation |
| Appearance | White to off-white powder | White to off-white crystalline powder |
| Specific rotation | Not applicable | +17.0° to +19.5° |
| EU permitted-forms list | Not named, as of this review | Named in Annex II |
The last row is the one that decides markets for a supplement. The EU list is form-specific, and a chelate is not covered by the amino acid's entry. The US route is a lawful basis for the exact dietary ingredient, and that basis has to be established for each form rather than inferred from “selenium”.
The same element at a different concentration
The concentration gap is the practical difference. One gram of selenium needs 50–100 g of the 1.0–2.0% chelate, but only about 2.44 g of L-selenomethionine at 41.0%. Put the other way, a gram of the chelate carries 10–20 mg of selenium, while a gram of the amino acid carries about 400 mg.
| Selenium dose | Glycinate 1.0% | Glycinate 1.5% | Glycinate 2.0% | L-Selenomethionine (40% Se) |
|---|---|---|---|---|
| 55 µg | 5.5 mg | 3.67 mg | 2.75 mg | 0.14 mg |
| 100 µg | 10 mg | 6.67 mg | 5 mg | 0.25 mg |
| 200 µg | 20 mg | 13.3 mg | 10 mg | 0.50 mg |
Both materials are premix ingredients at these masses, not capsule fills on their own. A 500 mg capsule of the chelate at 1.5% would carry 7.5 mg of selenium, about 29 times the EFSA tolerable upper intake level of 255 µg/day for adults. The amino acid carries more selenium per gram still. The dose arithmetic is the first thing to redo when a formula changes source.
The identity tests are not interchangeable
L-Selenomethionine is proven by its assay, its infrared spectrum, its specific rotation and its selenium figure against the stoichiometry. The rotation separates the L form from the D form and a racemate; the selenium figure, at 40.27% of the molecule's mass, catches a dilution or a sulfur analogue. None of those tests says anything useful about a chelate, which has no single enantiomer and no fixed selenium fraction.
The chelate is proven the other way: total selenium, glycine with the free fraction, the calculated ratio, and speciation for the inorganic fraction. A “selenium 1.5%” certificate can describe a blend of sodium selenite and glycine; a “selenium 40%” certificate can describe a racemic amino acid. One number is not an identity for either product, and a certificate written for one form cannot be read as if it were the other.
The methods are described in the methods library; the chelate's tests are worked through on the selenium glycinate identity page, and the amino acid's on the L-selenomethionine identity page.
What the label has to name
The nutrition panel declares selenium in micrograms; the ingredient statement names the source. In the EU, a food supplement must use a form named in Annex II to Directive 2002/46/EC. L-Selenomethionine is named; selenium glycinate is not, as of this review, so the chelate is not covered by the amino acid's entry. In the US, the Supplement Facts panel declares selenium and the ingredient statement names the form, and each form needs its own lawful basis as a dietary ingredient. The UK applies the GB list in Great Britain and the EU list in Northern Ireland.
The brand name is not the ingredient name. “Selenium” alone describes the nutrient, and a pack that leaves the source generic does not match a file built around one form. A claim written for the amino acid does not transfer to the chelate, and the reverse is also true.
The market file decides before the formula does
For an EU food supplement, the permitted-forms list is the gate, and it currently favours L-selenomethionine. For a market where the chelate is accepted, the file has to carry the carrier declaration, the selenium basis, the glycine ratio and the speciation, because those are the points a reviewer will test. The US asks a different question: whether the exact form has a lawful basis for the intended use, and the buyer's team confirms it for the finished product.
If the same SKU is sold in several markets, the source has to satisfy the strictest file, or the label has to differ by market. A single artwork with one ingredient name is not always possible, and the difference is easier to find before the print run than after it.
When to choose which
Choose L-selenomethionine when the market is the EU supplement market, when the label needs a defined molecule with a rotation, when the formula needs a high selenium density, or when the existing file already names the amino acid. Choose selenium glycinate when the market route is confirmed for the chelate, when a water-soluble organic source with a declared carrier is wanted, and when the label, the stability arm and the dossier are built around it.
A switch is a new product, not a substitution. The weigh-up changes by a factor of about 20–40, the identity tests change, the label changes and the market file is rebuilt. The selenium glycinate hub carries the catalog specification; the grade page covers the carrier and the presentation; the compliance page sets out the source question; the L-selenomethionine page gives the amino acid's specification; the quality page covers the release workflow.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation