05 Compliance

The regulatory file for magnesium orotate

Technical document 05 · Reviewed 2026-11-19 · Magnesium Orotate

On this page
  1. What the file has to settle
  2. European Union
  3. United States
  4. Contaminant ceilings
  5. Wording and claims
  6. Documents behind the file
  7. Five checks before ordering

The regulatory file for magnesium orotate starts with the exact salt: the dihydrate, CAS 34717-03-8, at 98.0–102.0% assay and 6.4–6.8% magnesium. Permission, contaminant limits, label wording and claim rules are four separate tests, and an entry for another magnesium salt does not answer any of them. The buyer's regulatory team confirms the route for the destination; this page lists the checks and the documents that route needs.

In one line

Permission, contaminants, label and claim are four separate checks, and an entry for another magnesium salt does not transfer to the orotate.

What the file has to settle

A complete file answers four questions. Is the exact salt permitted as a magnesium source in the destination? Do the contaminant results fit the finished-product ceiling at the real dose? Does the label name the salt and declare the element correctly? Is the claim one the market allows? The certificate answers none of these on its own; it supplies the lot data the answers rest on.

The specification version, the hydrate, the assay basis and the CAS number should be the same in the quotation, the technical data sheet and the certificate. A file that drifts between “magnesium orotate” and “magnesium orotate dihydrate” is already inconsistent before a regulator reads it.

European Union

Directive 2002/46/EC sets the framework for food supplements, and Annex II carries a positive list of permitted vitamin and mineral substances, magnesium sources among them. The list names individual salts. The first check is whether magnesium orotate, as the dihydrate, is named in the version in force at the time of placing on the market; the list is amended over time, and the current consolidated text governs.

If the salt is not named on the supplement list, that does not create a route by itself. The novel-food regulation, the food-additive route and the general food law each have their own test, and the buyer's regulatory team confirms which one applies. General labelling under Regulation (EU) No 1169/2011, contaminant limits under Regulation (EU) 2023/915 and claims under Regulation (EC) No 1924/2006 apply alongside whichever route is used.

The product-specific file should show the specification the lot was made to, the certificate for the lot and the label artwork. A notification or an entry on a list is not a substitute for any of the three.

United States

For the United States, the route runs through the dietary-ingredient provisions: the seller has to name the basis, whether pre-1994 marketing, a new dietary ingredient notification, or a GRAS conclusion for a food use. An essential nutrient does not make every salt a lawful ingredient; the specific basis is what counts, and it belongs in the supplier file rather than in an assumption.

The Supplement Facts panel reports elemental magnesium against the 420 mg Daily Value, and the ingredient list names the salt. A blend with another magnesium source names both. Structure/function statements carry the DSHEA disclaimer and must be substantiated; disease claims are not available.

Contaminant ceilings

Contaminants are a finished-product calculation, not just a drum result. The table is a supplement starting point; the text in force and the daily dose settle the final figure.

Contaminant limits to confirm for the finished product · as of this review
ElementTypical supplement referenceWhat the file should show
Lead (Pb)3.0 mg/kg in the supplement as soldMeasured lot figure, method and dose calculation
Cadmium (Cd)1.0 mg/kg in the supplement as soldLot figure and any category exception
Mercury (Hg)0.10 mg/kg in the supplement as soldLot figure and method
Arsenic (As)Customer or market limitAgreed limit and method on the certificate

The orotate's low magnesium fraction matters here. A 100 mg magnesium dose is about 1.5 g of the dihydrate, so the salt can be most of a capsule or a sachet. At 75% of the serving mass, a raw material at the 3.0 mg/kg lead limit contributes about 2.25 mg/kg to the finished product, which leaves very little room under a 3.0 mg/kg ceiling. A concentrated salt such as the oxide would sit at a much smaller share of the serving and could carry a higher raw-material figure. Run the sum before the first order.

Wording and claims

European magnesium claims sit in Regulation (EU) No 432/2012, and each carries conditions. They speak of a contribution to normal function, not of a disease, a symptom or an outcome. In the United States, a structure/function statement belongs to the brand, must be truthful and substantiated, and carries the DSHEA disclaimer.

Nothing on this site is a claim for magnesium orotate. The pages publish the specification, the methods and the framework; the claim is the brand's to print and the market's to authorise. A sentence such as “the dihydrate is used in capsules and tablets” describes the material, not a health effect.

Documents behind the file

  • Batch certificate covering assay, magnesium, Karl Fischer water, identity and the contaminant panel.
  • Specification and TDS naming the dihydrate and its CAS number.
  • Safety data sheet, 16 sections.
  • Statements on allergens, GMOs, origin and solvent residues.
  • The US dietary-ingredient basis, if the buyer needs it.
  • A third-party report, if the review or the customer asks for one.

Five checks before ordering

  1. Confirm that the exact salt, magnesium orotate dihydrate, is permitted as a magnesium source in the destination market.
  2. Recalculate the contaminant results at the real dose against the finished-product limit.
  3. Match the nutrition declaration to the salt, the hydrate and the certificate.
  4. Check that the wording is an authorised claim or a substantiated structure/function statement.
  5. Keep the US ingredient-status basis and the current Great Britain and Northern Ireland position in the pack.

The product hub carries the specification these checks are run against; the identity page covers the analytical evidence; the grades page explains the salt choice that drives the label arithmetic; the EU regulatory summary gathers the instruments; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation