05 Compliance

The regulatory file for magnesium lactate

Technical document 05 · Reviewed 2026-11-19 · Magnesium Lactate

On this page
  1. What a complete file holds
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Label and claims
  6. Documents that belong in the file
  7. Checklist before the first order

Magnesium lactate is the magnesium salt of lactic acid, and the regulatory file is built around the finished product rather than the drum alone. The buyer's regulatory team confirms the route for the destination: a food supplement that supplies magnesium and a food additive are different files with different conditions. This page sets out the framework, the limits and the papers a buyer should hold, so the specification and the destination can be checked side by side.

In one line

A magnesium salt can enter a market as a supplement source or as an additive, and only the destination's current text says which file applies.

What a complete file holds

Four questions define a complete file. Which material, and which revision of the specification, is being bought? Which lot does the certificate describe? Which route fits the finished product in the destination, and what limits and label rules follow from it? And what has to be reopened when the source, process or pack is changed?

The COA covers one lot, the TDS covers the specification, and the SDS covers handling. None of the three establishes a market route. A supplier who offers a certificate as a regulatory approval has confused a lot document with a market authorisation. Route is a property of the finished product, its dose and its destination, and the buyer's regulatory team is the party that confirms it.

Allergen and GMO statements, the country of origin, a residual-solvent statement where one is relevant and a change-control policy belong in the same folder. Keep a dated document index: undated PDFs cannot be audited. The specification version on the quotation should be the version in the file.

European Union

The EU framework starts with general food law, Regulation (EC) No 178/2002, and adds the labelling rules of Regulation (EU) No 1169/2011 and the contaminant limits of Regulation (EU) 2023/915. Where the finished product is a food supplement, Directive 2002/46/EC applies, and the nutrition declaration gives magnesium in milligrams, with a percentage of the reference intake beside it. The directive also leaves member states room to set maximum levels for vitamins and minerals in supplements, so the destination country's national rule is checked as well as the EU text.

Where the destination regulates the material as a food additive rather than a supplement ingredient, Regulation (EC) No 1333/2008 and its lists are the texts to check, and the permitted use and level are set there. A route is not a property of the powder: one lot can fit one file and fall outside another. Check the consolidated text as it stands, because a summary can lag the instrument.

The EU has no single maximum for magnesium in supplements; EFSA's tolerable upper intake level for supplemental magnesium is 250 mg/day for adults, and it is a risk-assessment value rather than a product limit. The finished-product dose and the national rule decide what may be sold and declared.

United States

In the United States, the starting point is the dietary supplement route: the ingredient is named on the Supplement Facts panel, the finished product is made under 21 CFR 111, and the label and claims are reviewed against the dietary-supplement rules. Magnesium is declared as the elemental amount against its Daily Value, while the ingredient list names the salt.

If the ingredient is new for the purpose, the new-dietary-ingredient route and its notification apply; the buyer's team confirms whether that route is needed for this material and this use. The supplier's job is to identify the basis it depends on and to point to the supporting document. A certificate does not establish the route, and a statement that the material is “generally recognised” is not a substitute for the document that the destination requires.

Contaminants and limits

The catalog limits below are release gates for the ingredient. They are not automatically the finished-product limits; the daily dose and the destination text decide the final figure, and the calculation has to be shown in the file.

Contaminants to check against the finished-product dose
ParameterCatalog release limitEvidence to keep
Lead (Pb)≤3 mg/kgLot result, method and the finished-product calculation
Arsenic (As)≤2 mg/kgLot result and the agreed limit for the market
Cadmium (Cd)≤1 mg/kgLot result and any category exception
Mercury (Hg)≤0.1 mg/kgLot result and method
MicrobiologyCounts and absence testsCounts, absence statements and the test portion

The contaminant result is reported per element, not as a total, and the method and detection limit belong beside it. A finished-product calculation that divides by the dose assumes the dose is fixed; if the label claim or the serving size changes, the calculation is repeated.

Label and claims

In the EU, the register of authorised health claims carries magnesium claims worded around normal muscle function, normal energy-yielding metabolism, the normal function of the nervous system and the reduction of tiredness and fatigue. A “source of magnesium” claim rests on a significant amount: 15% of the 375 mg reference intake is about 56 mg, in the quantity the regulation specifies. The wording on the pack is the register wording, not a paraphrase, and the brand's reviewer confirms that the claim and the dose meet the condition.

In the United States, a structure or function statement about magnesium is allowed with the required disclaimer, while a disease claim is not. Neither market lets a certificate authorise a claim, and no claim rewrites the specification. The label names the salt and declares the elemental magnesium; the two are not the same number.

Documents that belong in the file

  • Specification with the hydrate state, CAS number and version.
  • Certificate of analysis for the lot, with the magnesium and water results.
  • Technical data sheet and safety data sheet.
  • Allergen and GMO statements, and the country of origin.
  • Contaminant and microbiology results with methods and limits.
  • A statement of the regulatory basis the supplier relies on, and the change-control policy.

The file is reviewed as a set. A certificate without the specification it was released against cannot be audited, and a specification without a version number cannot be controlled. Catalog ranges are on the product hub; the certificate layout is on the COA page; the analytical evidence is on the identity page; framework references are in the EU note and the US note; the release file is described on the quality page.

Checklist before the first order

  • Hydrate, CAS number and specification revision are recorded.
  • The route has been signed off by the buyer's regulatory team.
  • Contaminants are recalculated at the finished-product dose.
  • Destination labelling and claims have been reviewed.
  • Allergen, GMO, origin and change-control papers are in the folder.
  • One version number runs through quotation, specification and certificate.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation