Nonahydrate or anhydrous: choosing a magnesium citrate grade
Magnesium citrate nonahydrate is the nine-water form of the salt: Mg3(C6H5O7)2·9H2O, CAS 153531-96-5, with 11.0–12.5% magnesium and 24.0–28.0% water in the catalogue. The anhydrous grade carries the same anion without the crystal water, at 14.5–16.4% magnesium and a loss on drying of ≤2.0%. A label dose therefore needs about a third more nonahydrate powder, and the dosage form and fill weight decide which grade fits.
The nonahydrate is a grade, not a synonym for magnesium citrate: nine water molecules set the magnesium figure, the fill weight and the name on the specification.
Water is part of the formula
Crystal water occupies defined sites in the lattice. It is not a surface film that can be dried away without changing the solid, and it is the reason the two grades have different molar masses and different magnesium per kilogram. The nonahydrate is about 613 g/mol; the anhydrous salt is about 451 g/mol.
“Magnesium citrate” on a purchase order names a family. The nonahydrate has its own CAS number and its own release windows, and all of them should be written on the order, the data sheet and the certificate. The formula predicts 11.9% magnesium and 26.4% water; the catalogue windows are wider because real lots carry purity and handling variation.
The two catalogue grades
| Item | Anhydrous | Nonahydrate |
|---|---|---|
| Formula | Mg3(C6H5O7)2 | Mg3(C6H5O7)2·9H2O |
| CAS number | 3344-18-1 | 153531-96-5 |
| Molar mass | About 451 g/mol | About 613 g/mol |
| Magnesium | 14.5–16.4% | 11.0–12.5% |
| Water | Loss on drying ≤2.0% | Karl Fischer 24.0–28.0% |
| Identity | Citrate reaction and infrared spectrum | Citrate reaction and magnesium titration |
| Mesh | ≥95% through 40 mesh | ≥95% through 80 mesh |
| Common formats | Capsules, tablets, high-dose powders | Sticks, drink mixes, capsules |
The mesh and identity methods are catalogue choices, not laws. A nonahydrate can be milled coarser or granulated, and citrate identity can use reaction, infrared or both. Ask for the lot's mesh and method.
The magnesium windows do not meet. A certificate at 13% fits neither grade; establish whether it is a blend, a partly dried hydrate or another salt.
Powder behaviour
The catalogue powder passes 80 mesh (180 µm). That is finer than the anhydrous 40 mesh grade, which helps dispersion in a stick or drink and creates more dust and slower capsule filling. Bulk density is not fixed in the catalogue; ask for the lot value when the capsule volume or hopper flow is critical.
The salt is hygroscopic. Because the nonahydrate already carries its lattice water, the main risk is surface moisture and caking rather than further hydration, but an open liner in a damp room still changes the powder. Keep it sealed, keep it dry, and let a cold pack warm to room temperature before opening so condensation does not form.
Colour is white to off-white. A grey or dull cast can come from metal contact or overheating while the assay and water still pass, so it is a reason to review the batch record, not an identity test.
Fill weight and label
The powder mass for a label dose is the elemental magnesium divided by the magnesium fraction. The table uses the catalogue edges and the midpoint for planning; the lot certificate replaces the midpoint at release.
| Label Mg | Nonahydrate 11.0% | Nonahydrate 12.5% | Anhydrous 15.45% |
|---|---|---|---|
| 50 mg | 455 mg | 400 mg | 324 mg |
| 100 mg | 909 mg | 800 mg | 647 mg |
| 200 mg | 1,818 mg | 1,600 mg | 1,295 mg |
At a fixed 500 mg fill, the nonahydrate at 11.75% gives about 59 mg magnesium and the anhydrous grade at 15.45% gives about 77 mg. A 100 mg claim may fit one capsule on the anhydrous grade and need a larger capsule or two on the nonahydrate. Sticks and sachets have more room, which is why the hydrate appears there.
The label follows the powder. The EU declares magnesium in mg and as a share of 375 mg; the US uses the 420 mg Daily Value. A grade change at a fixed powder weight moves the declared magnesium by about a third, so it needs a new label. The fill-weight page shows the arithmetic.
Specification language
- “Magnesium citrate nonahydrate, CAS 153531-96-5, Mg3(C6H5O7)2·9H2O.”
- “Magnesium 11.0–12.5% as received by EDTA titration.”
- “Water 24.0–28.0% by Karl Fischer.”
- “Citrate identity by reaction and magnesium titration, reference named.”
- “80 mesh: ≥95% through 180 µm; pH and bulk density on request.”
- “Metals and micro as listed; no added magnesium oxide, carbonate or citric acid.”
- “Pack, storage and retest period on the technical data sheet.”
A specification copied from the anhydrous grade will reject every nonahydrate lot. The magnesium range and the drying limit describe a different solid, so start from the hydrate name.
When the other grade is the fit
Anhydrous suits a fixed capsule size, a high dose, or a freight-sensitive project. Nonahydrate suits a stick, drink or gummy where mass is available and the finer powder disperses. Neither is purer; the difference is concentration and crystal form.
Changing grade is a change control: new specification, new water result, new stability work and new label arithmetic. The stability page covers water and pack; the COA page shows the water line.
The nonahydrate hub holds the catalogue line; the compliance page covers the label route; the methods index explains the assays; the quality page covers release.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation