What the COA for magnesium bisglycinate actually contains
Every lot of magnesium bisglycinate ships with a certificate that reports the magnesium assay, the glycine content, the calculated Mg : glycine ratio, free glycine, moisture, pH, particle size and the contaminant panel. The parameter list is fixed; the results change from lot to lot. Anything your quality team needs beyond this list can usually be added as a separate test before the lot is released.
A magnesium assay on its own cannot tell a chelate from a blend. The certificate has to report the ligand, the ratio and the form alongside the metal.
The one-page sheet
The certificate is built around the release specification, not around a catalogue description. Each line names the method, the release limit and the result for the lot. A result without a method is a number without a meaning.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White to off-white crystalline powder |
| Magnesium (Mg) | Complexometric EDTA titration | 13.5–14.2% |
| Glycine | HPLC | 84.0–88.0% |
| Mg : glycine ratio | Calculated from the two assays | 1.95–2.05 mol glycine per mol Mg |
| Free glycine | HPLC | ≤1.0% |
| Loss on drying | USP <731> | ≤2.0% |
| pH (5% suspension) | Potentiometry | 8.5–11.5 |
| Particle size | Sieve analysis | ≥95% through 40 mesh |
| Bulk density | Tapped cylinder | 0.55–0.90 g/mL |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
Microbiology is reported on the same certificate as a second block: aerobic plate count, yeast and mould, E. coli and Salmonella. The limits are agreed in the specification, not chosen after the result is known.
What “14%” is measured against
Two percentages are routinely confused in this trade: the purity of the powder and the elemental magnesium content. A supplier may describe the material as “98%” or “99%” pure while the elemental magnesium is about 14%. The two figures answer different questions.
The anhydrous chelate has the formula Mg(C₂H₄NO₂)₂ and a molar mass of about 172.4 g/mol. Magnesium contributes 24.3 g/mol, or 13.9% of the molecule; glycine contributes the remaining 86.1%. A specification of 13.5–14.2% magnesium is therefore a statement about the chelate itself, not a purity claim.
The hydrate state changes the arithmetic. The monohydrate carries about 12.6% magnesium and the dihydrate about 11.8%. A certificate that reports 11.9% magnesium may describe the same chemical entity as a 14% certificate, but it describes a different drum. This is why the specification has to name the hydrate state, and why the loss-on-drying figure belongs next to the assay.
Release limit versus batch result
A release limit is the range the lot must fall inside. A batch result is what the laboratory measured. The certificate should show both, and it should show the method beside each. “Passes specification” on its own is not a result; it is a conclusion without the evidence.
Some parameters are reported rather than limited. Free glycine, for example, may be reported at 0.4% on one lot and 0.8% on another without either lot failing. The buyer still needs the figure, because free glycine is the part of the ligand that did not react. A specification that sets a limit on total glycine but never reports free glycine can be met by adding glycine to the blender.
The same logic applies to the Mg : glycine ratio. The ratio is calculated from two measured values, so its uncertainty is the uncertainty of both assays. It is a useful identity check, not a substitute for the individual figures.
What changes between batches
The magnesium assay follows the chelation and crystallisation steps; the glycine assay follows the same reaction from the ligand side. The ratio should stay close to 1:2 if the material is the chelate. Loss on drying follows the drying step and the hydrate form. pH follows the residual alkalinity of the crystallisation liquor. Particle size follows milling and sieving; bulk density follows particle shape and moisture.
Colour is the least quantitative signal and often the most useful. A cream or tan tint can indicate a drying step that ran hot, a trace of iron, or a Maillard reaction with a reducing sugar. The assay can still pass. The tint is a reason to ask for the batch record, not a reason to reject the lot by itself.
When to order third-party testing
Order an outside test when the material is from a new source, when the first shipment is about to enter a regulated market, or when the label makes a form claim that the certificate does not prove. The useful panel is not a repeat of the supplier's assay. It is the set of tests that answer the question the supplier's certificate leaves open: X-ray diffraction for crystalline magnesium oxide, FTIR for the coordination of the chelate, and ICP-MS for the contaminant panel on the same sample.
A second laboratory is also the right way to settle a dispute. Send the retained sample, the supplier's COA and the specification, and ask for the three tests that distinguish the form, not for a full repeat of the certificate.
What to compare between suppliers
Put six lines side by side before comparing price: the chemical form and hydrate state, the magnesium assay and its method, the glycine assay, the Mg : glycine ratio, free glycine, and the presence or absence of an XRD oxide screen. If two quotations agree on the magnesium figure but disagree on the other five, they are not quoting the same material.
The batch record is the second layer: who manufactured the lot, which magnesium source was used, which drying step was applied, and what the retained sample is. A certificate can be accurate and still describe a lot that is not the lot you will receive. The lot number on the COA, the lot number on the drum and the lot number on the retained sample should be the same number.
For the specification behind this page, see the magnesium bisglycinate product page. The grade logic is on the grade comparison page, and the tests that separate a chelate from a blend are on the identity page. The release workflow is described on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation