04 MOQ & ordering

Magnesium acetate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-20 · Magnesium Acetate

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

Magnesium acetate ships from a 1 kg foil pouch, and that pouch is the minimum order. The production unit is a 25 kg fiber drum. Standard packs leave within 1–7 days of order confirmation. To turn an enquiry into a firm offer, we need the salt form and hydrate state, the release specification, the pack, the delivery route, the paperwork and the end use.

In one line

The 1 kg pouch is the smallest unit we can seal, label and sample as one lot; the 25 kg drum is the production pack, and the lead time is 1–7 days for either standard pack.

Why the minimum is 1 kg

The 1 kg pouch is a commercial unit, not a sample scoop. It can be heat-sealed, given a lot code and opened for testing without disturbing a production drum. For a formulator, that covers a bench run, a retained sample and an independent identity test. A smaller quantity would have to be split from a larger lot; the split gains a handling record and loses the original pack identity.

The drum is the other unit. It cuts the number of times the powder is exposed and the handling per kilogram, but it also locks inventory into a hygroscopic material. A drum held for months in a humid store is a different risk from a pouch used in a week. The right pack is the one that matches the batch size and the storage plan.

Packs and formats

Standard magnesium acetate packs
PackNet weightTypical useNotes
Foil pouch1 kgBench trial, sample, small batchHeat-sealed; use or reseal promptly
Fiber drum25 kgProductionLiner is the moisture barrier; lot code inside and out
GranulatedOn requestTablets, sachetsFlow changes; declare any granulation aid
Finer meshOn requestFiner-mesh applicationsDust and segregation; mesh on the COA

The catalog powder is ≥95% through 80 mesh. A granulated or finer-milled lot is a new specification line, not a different bag. The pouch and the drum liner are the barriers; the closure is where moisture gets in. A pouch rolled shut is not sealed, and an open liner turns the drum into a humid chamber.

Lead time and dispatch

Standard packs are dispatched 1–7 days after order confirmation. The clock covers picking, the lot documents and handover to the carrier; it stops before transit, import clearance and the customer’s own release. A granulated lot or a special mesh is made to order and needs its own date.

Ask for a dispatch date rather than a range. The pouch usually travels as a parcel and the drum as pallet freight. The COA, TDS and SDS should be in the same shipment as the lot, and the pouch should arrive with its seal and lot code intact.

What a quotation needs

Six details turn a request into an offer that can be compared:

  1. Identity. Magnesium acetate tetrahydrate, CAS 16674-78-5, with the hydrate named.
  2. Release specification. Assay and basis, magnesium, water, mesh, heavy metals and microbiology.
  3. Quantity and pack. 1 kg pouch, 25 kg drum, granulated or finer mesh.
  4. Route. Destination country and Incoterm.
  5. Paperwork. COA, TDS, SDS and any importer statement.
  6. End use. Supplement, food or another application, and the market.

Without the hydrate state and the water range, the offer describes a family rather than a drum. Commercial terms stay on the quotation and are not published here.

The sample is a lot, not a demonstration

The 1 kg pack is the lot sample. Check identity, assay, water and microbiology before scaling, and retain a sample from the same pack. The lot code must connect the sample, the COA and the offer. A sample with no lot code is a demonstration.

A bench quantity below a kilogram is a repack. It comes from a larger lot, gets a new handling record and cannot be presented as the standard pouch. Ask for the split in writing and keep its code with the trial results; the bench powder and the production drum need not be the same lot.

Terms to settle before the first order

Put the commercial and quality terms in one place before the first production order: Incoterm, pack, dispatch window, specification revision, per-lot COA, retained sample, retest period and the route for a change. A quality agreement is easier to negotiate now than after a disagreement.

If a lot fails the agreed specification, the evidence is the retained sample and a joint test against the named method. The agreement should name the referee laboratory both sides accept. A photograph of a drum is not a result.

The magnesium acetate hub holds the catalog specification; the COA page lists the release tests; the stability page covers moisture, the pack and the retest period; the MOQ glossary entry defines the term; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation