05 Regulatory compliance

The regulatory file for magnesium acetate

Technical document 05 · Reviewed 2026-11-20 · Magnesium Acetate

On this page
  1. What the file contains
  2. European Union and the United Kingdom
  3. United States
  4. Contaminants and limits
  5. Claims and the label
  6. Documents for the file
  7. Checklist before the first order

Magnesium acetate is a magnesium source, and the regulatory file has to show that the form is permitted, the specification and certificate match, the contaminant limits are met at the finished-product dose and the label names the salt correctly. The supplier file supports those checks; the buyer’s regulatory team confirms the route for the destination market. This page sets out the documents and the questions, not a legal opinion.

In one line

The specification describes the salt; the regulatory file shows whether the source is permitted, what the label must say and which limits apply in the destination market.

What the file contains

Four things sit in the file: the specification version for magnesium acetate tetrahydrate, the lot certificate, the destination’s permitted-source and labelling rules, and the change-control record for source, process and pack. The COA reports the lot; the TDS states the specification; the SDS covers handling. None of them decides the legal route.

The form matters at the first check. “Magnesium acetate” is a named salt; a generic “magnesium” ingredient, a blend or a different hydrate is not the same entry. Keep the CAS number, the formula and the water range on the same document, so that the material the buyer registers is the material the supplier ships.

European Union and the United Kingdom

In the EU, magnesium acetate is listed among the permitted magnesium forms for food supplements in Part B of Annex II to Directive 2002/46/EC, and among the mineral substances that may be added to foods in Annex II to Regulation (EC) No 1925/2006. That listing is the start, not the whole file: the label, the nutrition declaration and any claim are separate checks. Regulation (EU) No 1169/2011 sets the general labelling rules, and the magnesium nutrient reference value is 375 mg, so the % NRV is calculated against that figure.

Contaminants are set by Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. The health-claim register is Regulation (EU) No 432/2012; the authorised magnesium claims are tied to conditions, including the amount per daily portion. The current consolidated text is the reference, as of this review. For the UK, Great Britain uses the GB register and Northern Ireland follows the EU list; the delivery address decides which applies.

United States

In the United States, the question is how the salt is positioned: a magnesium source in a dietary supplement, or an ingredient in a conventional food. The buyer’s regulatory team confirms the basis for the intended use. On a supplement label, the Supplement Facts panel names magnesium and the source in the form “magnesium (as magnesium acetate)”, and the percentage daily value is calculated against 420 mg for adults and children four years and older.

A structure/function statement needs substantiation and the DSHEA disclaimer, and no disease claim is open. The certificate supports the material; it does not support the claim or the label wording. If the finished product is a food rather than a supplement, the route and the labelling are different again, and the buyer confirms them before the artwork is finalised.

Contaminants and limits

The catalog panel is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, with APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. The EU supplement limits for lead, cadmium and mercury are 3.0, 1.0 and 0.10 mg/kg; arsenic has no harmonised EU limit for supplements, so the buyer sets one. Those are limits on the material; the finished-product calculation uses the daily dose and the amount of magnesium acetate per portion.

Contaminant limits to confirm for the finished product
ParameterTypical referenceWhat the file shows
Lead3.0 mg/kg in the supplement (EU)Lot result, method and finished-product calculation
Cadmium1.0 mg/kg in the supplement (EU)Lot result and any category exception
Mercury0.10 mg/kg in the supplement (EU)Lot result and method
ArsenicBuyer or market limitAgreed limit, method and result
MicrobiologyCounts and absenceLot count and absence statement

Claims and the label

Magnesium claims are condition-bound. In the EU, the authorised wording in Regulation (EU) No 432/2012 applies only when the daily portion meets the source condition, and the claim must be used as listed. In the US, a structure/function statement needs substantiation and the disclaimer. The supplier does not write the claim, and this page makes no claim. The brand’s reviewer checks the wording against the form, the dose and the market.

Do not use the acetate or citrate name as a claim. The counter-ion is part of the ingredient identity, not a health benefit. No disease-related claim is made for this material on this site. If the artwork names magnesium acetate, the specification and the certificate must name the same salt; a label written for the citrate is not corrected by a footnote.

Documents for the file

The file needs the COA with the assay, magnesium, water and acetate identity; the specification with the hydrate and water range; the SDS; the TDS; allergen, GMO and origin statements where the customer requires them; and a residual-acetic-acid or acidity statement if the specification sets one. Add the destination’s permitted-source check and the label review. The identity page covers the tests behind the certificate, and the magnesium citrate page is the comparison for a different salt.

Keep the documents versioned. A specification revision, a new source or a pack change should reopen the file, not sit beside it. The EU regulatory notes collect the framework references, and the quality page describes how the release file is assembled.

Checklist before the first order

  • Specification version, CAS number, hydrate state and water range are named.
  • COA, TDS, SDS, allergen, GMO and origin statements are on file.
  • The permitted-source listing is checked for the destination and the finished-product category.
  • The contaminant results are converted to the finished-product dose.
  • The label and any claim have been reviewed for the destination.
  • The source, process and pack are under change control.

The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the compliance file is the bridge between them and the market.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation