04 MOQ & ordering

Ferrous sulfate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Ferrous Sulfate

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. From confirmation to dispatch
  4. What a quotation needs
  5. What the first pouch qualifies
  6. Commercial and quality terms

Ferrous sulfate is sold from 1 kg: a single foil pouch is the entry pack, and a 25 kg fiber drum is the bulk unit. Standard lead time is 1–7 days from confirmation. To get a firm quotation, state the hydrate and CAS number, the iron and water windows, the quantity and pack, the delivery point and Incoterm, the documents required, and the intended use.

In one line

The 1 kg pack is the minimum because one lot code, one certificate and one retained sample must stay with the material while the iron and water figures are qualified.

Why the minimum is 1 kg

One kilogram is enough to run the checks a new lot needs: identity, complexometric assay, iron, Karl Fischer water, a ferric check, microbiology, a bench batch and a retained sample. It is the smallest unit that keeps one lot code and one certificate with the material. Smaller quantities are normally divided out of a larger lot, which breaks that link.

Because the pack is sold by weight, the grade decides how much iron arrives. A kilogram of heptahydrate at 20.09% contains about 201 g of iron; a kilogram of dried grade at 31% contains about 310 g. A project that needs 5 kg of iron therefore needs roughly 25 kg of heptahydrate or 16 kg of dried grade, before process loss.

The 25 kg drum lowers handling per kilogram, but it also locks up inventory and extends storage. The minimum is a pack rule, not a volume target.

Packs and formats

Ferrous sulfate packs and physical forms
ContainerNet fillWhere it fitsHandling
Foil pouch1 kgTrial and small batchHeat-sealed; reclosing is only for a short hold
Fiber drum25 kgProductionInner liner; write the opening date on the drum
Powder, 40 mesh1 kg or 25 kgCapsules, tablets, blendsThe standard catalog form
CrystalsOn requestSolution processesDissolves slowly; check agitation

At 1 kg the foil is the barrier and the seal is the weak point. Reclosing an opened pouch does not restore a heat seal, and the air inside has already changed. A drum depends on its liner: keep the liner tied, put the drum on a pallet, and mark the date it was first opened. Pouch, liner and certificate should all show the same lot code.

The catalog powder passes 40 mesh; crystals are quoted on request. A different mesh, a granulation or a dilution is a new specification, not a packing variant. Tell us before the quote if the line needs a coarser or faster-flowing powder, because the sieving step may add time.

From confirmation to dispatch

A standard pack ships within 1–7 days of confirmation. Picking, documents and handover are inside that window; transit, customs and the buyer's release are not. A crystal grade, custom mesh or special pack is quoted with its own timing.

Ask for a dispatch date as well as a lead time. A drum usually moves on a pallet and a pouch as a parcel; the Incoterm assigns freight and entry clearance. Documents should accompany the lot rather than follow it.

What a quotation needs

Six details make quotes comparable:

  1. Article. Ferrous sulfate heptahydrate, CAS 7782-63-0, or the dried grade with its CAS number.
  2. Limits. Assay, iron, water, identification, mesh, heavy metals, microbiology and any ferric limit.
  3. Pack and quantity. 1 kg pouch, 25 kg drum, powder or crystals.
  4. Delivery point and Incoterm. Country, address or port, and the trade term.
  5. Documents. COA, specification, SDS and any statement the importer requires for the destination.
  6. Intended application and destination. Whether the material goes into a supplement, a food or another product, and the country of sale.

Without the hydrate, a quote carries only a family name. The same name covers a 20% iron hydrate and a 31% iron dried article, and neither substitutes for the other on a label or in a fill. Commercial terms appear on the quote, not on this page.

What the first pouch qualifies

The 1 kg pouch is what a new lot is qualified on. Run identity, assay, iron, water and microbiology before scale-up, and request a ferric result if storage will be long. Retain material from that pouch. If sample, COA and quote do not share a lot code, the exercise is a demonstration rather than a qualification.

For a smaller bench trial, ask first. Material divided from a drum is a repack with its own traceability; record it separately. A bench sample and a later production drum need not come from the same lot.

Commercial and quality terms

The quote fixes commercial terms, Incoterm, pack, lead time and documents. Quality terms run beside it: specification revision, COA per lot, retained sample, retest period and change control. Put the quality agreement in place before the first production order, not after a disagreement.

Returns and replacements follow the quote and the quality agreement. If a lot misses the agreed limits, the retained sample and a joint re-test decide the outcome; a photo does not. Name the referee laboratory and the party bearing that cost in advance.

Product data sit on the ferrous sulfate hub; release tests are listed on the COA page; market files are on the compliance page; the quality page explains the release workflow and the MOQ glossary entry defines the term.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation