The regulatory file for dicalcium phosphate
Dicalcium phosphate reaches a market by one of three routes: a calcium source in a food supplement, a food additive with a technical function, or an excipient in a medicinal product. Each route has its own instrument, its own limits and its own label rules. The buyer's regulatory team confirms which route applies to the destination; this page sets out the frameworks, the limits and the documents the file needs.
The specification describes the powder; the regulatory file shows which route it takes, which limits apply and what the label may say in the destination market.
Three routes, one specification
The same drum can be a nutrient, an additive or an excipient, and the legal basis changes with the use. A calcium source in a supplement is regulated as a nutrient source in most markets. A technical use, such as an anti-caking or buffering function in a food, is an additive use. An excipient use in a tablet is regulated through the medicinal-product framework of the destination. The specification and the certificate are common to all three; the route determines which extra documents and which limits apply.
Do not let the route be inferred from the product name. The route is a decision for the buyer's regulatory team, and the supplier's job is to give that team the material data it needs.
European Union
As a food additive, dicalcium phosphate is E 341(ii), calcium hydrogen phosphate. The additive framework is Regulation (EC) No 1333/2008, which sets the permitted uses and conditions, and the specification is Commission Regulation (EU) No 231/2012. The additive specification sets the assay at 98–102% of CaHPO₄ after drying at 200 °C for three hours, which is the same window as this catalog but a different drying basis from the routine loss on drying. The specification also sets limits for fluoride, arsenic, lead and mercury; check the current consolidated text, because the annexes are amended.
As a nutrient source in a food supplement, the material falls under Directive 2002/46/EC, which lists the permitted vitamin and mineral sources in its Annex I, and under the general food law of Regulation (EC) No 178/2002. Labelling follows Regulation (EU) No 1169/2011, whose Annex XIII gives reference values of 800 mg for calcium and 700 mg for phosphorus per day. Contaminants are governed by Regulation (EU) 2023/915, which replaced the older contaminant regulation; the limits that apply depend on the food category and on the additive or nutrient use.
The additive route and the nutrient route are not interchangeable. A material that meets the additive specification is not automatically the permitted source for a supplement, and the reverse is also true. The buyer's team confirms the route and the entry before the label is drafted.
United States
In the US, calcium phosphate, including the dibasic form, is listed as generally recognized as safe for use in food under 21 CFR 182.1217 when used in accordance with good manufacturing practice. That listing covers the mono-, di- and tribasic forms together, so the ingredient statement still has to name the salt and the hydrate. A dietary supplement uses the DSHEA framework, with the labelling rules in 21 CFR 101.36 and the nutrition labelling rules in 21 CFR 101.9.
The United States Pharmacopeia has a monograph for anhydrous dibasic calcium phosphate, with an assay of 98.0–103.0% and its own identification, fluoride and loss-on-ignition tests. The catalog window here is narrower at the top, at 98.0–102.0%. A customer who needs the pharmacopeial monograph should say so, because the release tests and the reference standards are not identical to the food-grade panel.
Structure or function statements are made for the finished product, not for the ingredient, and they carry their own notification and substantiation rules under 21 CFR 101.93.
Contaminants and limits
The catalog panel sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, with the microbiological counts on the specification. Those figures are the buyer's starting point, not a statement that they satisfy every market. The destination may set a lower lead limit, a fluoride limit or an additional element, and the additive specification may set its own numbers.
Fluoride deserves its own line. Dicalcium phosphate is made from phosphate rock, and fluoride travels with the phosphate unless the process removes it. The catalog does not list fluoride, so a customer whose market sets a fluoride limit has to ask for the determination and for the result on the lot.
Microbiology is a process-control result. A mineral powder is not a sterile product, and the specification sets counts and absence tests rather than a sterility claim.
What the label may say
The ingredient page makes no disease claim, and the finished product cannot borrow one from the material. Calcium and phosphorus are nutrients with reference values, so a content claim is a labelling question: the nutrient panel declares elemental calcium, and a claim such as “source of calcium” or “high in calcium” depends on the claim rules of the market and on the amount in the daily portion. The salt name and the elemental figure are separate statements, and both have to be correct.
A phosphorus figure is part of the same arithmetic. A product that declares calcium from dicalcium phosphate also supplies phosphorus at about 0.77 times the calcium mass, and that figure belongs in the nutrient panel where the market requires it. A label that declares the calcium but hides the phosphorus is incomplete for a reviewer who adds the two together.
Documents the file needs
| Document | What it shows |
|---|---|
| Specification, dated | Hydrate, assay, calcium, phosphorus, LOD, impurities, particle size |
| Certificate of analysis | The lot result against that specification |
| Safety data sheet | Handling, dust, transport classification |
| Manufacturing flow chart | Source, reaction, drying, milling and packing steps |
| Contaminant and microbiological reports | Heavy metals, fluoride where required, counts and absence |
| Allergen and GMO statements | Absence declarations for the destination |
| Certification and audit documents | Quality system, site audit, chain of custody |
| Label and use declaration | Ingredient name, hydrate, function and route |
The list is a starting point. A medicinal excipient route adds the pharmacopeial monograph and the excipient documentation; a food-additive route adds the additive specification and the use justification. This page cannot replace the destination counsel, and it is not meant to.
Checklist before the first order
- Name the route: supplement nutrient, food additive or excipient.
- Name the market and the instrument that applies, with the current text checked.
- Confirm the hydrate and the CAS number on the specification and the label.
- Confirm the contaminant limits, including fluoride if the market sets one.
- Confirm the label name, the elemental calcium figure and the phosphorus declaration.
- Confirm the documents, the language and the legalisation the destination needs.
- Record the specification version and put the hydrate, the particle size and the source under change control.
The product page carries the catalog figures; the grade page covers the hydrate; the COA page covers the certificate; the calcium carbonate page and the calcium citrate page show how the other calcium salts are filed; the quality page covers the release workflow.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation