Chromium nicotinate vs picolinate: the ligand, the chromium and the label
Chromium nicotinate and chromium picolinate have the same molecular formula, C18H12CrN3O6, the same formula weight, 418.31, and the same theoretical chromium content, 12.43%. They differ in the ligand: nicotinate is the pyridine-3-carboxylate and picolinate is the pyridine-2-carboxylate. A certificate that reports only chromium cannot tell them apart, and at a 200 µg dose the powder weight is about 1.6 mg either way. The ligand, the infrared spectrum and the label name are what separate them.
The two complexes share a formula and a 12.43% chromium figure, so only the ligand and the label name tell them apart.
One formula, two ligands
Both materials are chromium(III) complexes of a pyridinecarboxylic acid, three ligands to one metal. Nicotinic acid and picolinic acid are isomers, both C6H5NO2, and the complexes built from them therefore share a molecular formula and a molecular weight. The chromium fraction follows from the formula, so it is identical in theory: 12.43%.
The catalog windows are drawn differently — 12.0–12.8% for the nicotinate and 12.2–12.4% for the picolinate — but both bracket the same theoretical figure, and neither window is narrow enough to separate the two ligands. Two certificates can both report 12.4% chromium and describe different molecules.
The two complexes side by side
| Parameter | Chromium nicotinate | Chromium picolinate |
|---|---|---|
| CAS number | 64452-96-6 | 14639-25-9 |
| Ligand acid | Nicotinic acid, CAS 59-67-6 | Picolinic acid, CAS 98-98-6 |
| Formula | C18H12CrN3O6 | C18H12CrN3O6 |
| Formula weight | 418.31 | 418.31 |
| Chromium, theoretical | 12.43% | 12.43% |
| Catalog chromium | 12.0–12.8% | 12.2–12.4% |
| Appearance | Grey-green powder | Purple-red to red-brown |
| Loss on drying | ≤1.0% | ≤0.5% |
| Label ingredient | Chromium nicotinate | Chromium picolinate |
The rows that agree are the trap. The rows that differ are the material: two CAS numbers, two ligand acids, two colours, two moisture limits and two label names. A comparison that starts and ends with the chromium percentage has compared nothing that matters.
How the ligand is proved
Infrared is the first test that separates them. The position of the carboxylate on the pyridine ring changes the ring and carboxylate bands, so the spectrum of the nicotinate complex does not match a picolinate reference. The comparison has to be against the right reference spectrum; a generic “IR conforms” line proves only that someone compared it with something.
HPLC is the second. The complex can be assayed as the complex, and the ligand can be measured after release; nicotinic acid and picolinic acid have different retention times, so the chromatogram names the ligand. A laboratory that reports only a chromium figure has measured the metal, not the molecule. If the ligand is named on the label, ask for the chromatogram and the reference standard used.
The mass figure does not help. Because the formulae coincide, a mass-spectrometric molecular ion has the same mass for both complexes; the separation has to come from chromatography, infrared or NMR, not from a molecular weight.
What the label has to say
In the EU the ingredient list names the source, and chromium is declared in µg and as a percentage of the 40 µg reference intake. In the US the Supplement Facts panel declares chromium as the element with a 35 µg Daily Value, and the ingredient list names the source. In both markets the source name is the only place a shopper can see which ligand was used, because the chromium number is identical.
That makes a swap easy to miss in a specification review. A purchase order that says “chromium 12.4%” can be met by either complex; a purchase order that says “chromium nicotinate, CAS 64452-96-6” cannot. The label, the specification and the certificate should carry the same source name, and a change of source is a label change even when the chromium per serving stays the same.
One name needs care. Chromium polynicotinate covers niacin-bound preparations whose composition the supplier defines; it is not another word for the defined tris-nicotinate complex. If the label says polynicotinate, this comparison does not settle the specification.
The chromium, the dose and the fill
The dose arithmetic is almost the same for both, which is the point. At 12.43% chromium, 200 µg of the element is about 1.61 mg of either complex. The nicotinate window moves that figure by only a few percent, and the picolinate window moves it less. A 100 µg dose is about 0.8 mg, and a 1 mg dose about 8 mg.
Those weights are too small to weigh into a capsule, so the material is used as a dilution. At 1%, a 200 µg dose is about 161 mg of blend for either source. The fill weight does not change when the ligand changes; the label and the identity tests do. That is why a source swap can pass a weight check and still be the wrong material.
The blend is also where uniformity is won or lost. At 1%, the carrier is 99% of the powder, and a segregated blend gives some capsules more chromium than others even when the drum certificate is correct. The blend study, not the drum assay, is the evidence for the fill.
When to choose which
Choose the nicotinate when the label names chromium nicotinate, when the destination file covers that source, and when a grey-green 40 mesh powder suits a capsule, tablet or blend. Choose the picolinate when the label names it and the file is built around it. Both are poorly soluble in water, so neither is the easy route to a clear drink, and a solution format needs its own development work in both cases.
The chromium figure cannot be the deciding line. The deciding lines are the ligand on the label, the permitted-source check for the destination and the identity method the buyer can verify. A switch between the two needs a written change control, a new specification and a label check.
The catalog specification is on the chromium nicotinate hub; the other source is described on the chromium picolinate hub. The picolinate-versus-chloride question has its own comparison page, and a second picolinate salt is described on the zinc picolinate page. The analytical methods are indexed under methods, and the release workflow is on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation