06 Identity & adulteration

How we prove a calcium lactate lot is the pentahydrate

Technical document 06 · Reviewed 2026-11-19 · Calcium Lactate

On this page
  1. The four identity layers
  2. The ratio: one calcium to two lactates
  3. X-ray diffraction and the solid state
  4. What substitution looks like
  5. How to write identity into the specification
  6. Five questions for the supplier

A calcium lactate lot is what it claims when four lines agree: the calcium titration matches the stoichiometry of the salt, HPLC or IR shows lactate, Karl Fischer water matches the named hydrate, and the mass balance closes. The calcium figure alone cannot separate the pentahydrate from the anhydrous salt, from calcium carbonate, or from a blend. The water figure is what turns a calcium percentage into a hydrate.

In one line

Identity is a set of agreeing measurements: the titration says the calcium, the chromatography says the lactate, and the water says which hydrate.

The four identity layers

A certificate can name the right material and still fail to prove it. Each layer below is a separate question with its own evidence, and a supplier who answers only the first has described the paperwork rather than the powder.

Four layers of calcium lactate identity
LayerQuestionTestWhat it proves
DocumentIs the hydrate named?Name, CAS number, formulaPaperwork only
CalciumIs the cation calcium, and how much?Complexometric titration; oxalate reactionThe calcium and its quantity
LactateIs the anion lactate?HPLC against a lactate standard; IRThe acid
WaterWhich hydrate is it?Karl FischerThe hydrate state and the mass balance

The titration is the layer most often over-read. It measures calcium and nothing else, so a carbonate, a citrate and a lactate can all produce a calcium figure inside the same window if the dilution is arranged. What the titration does prove is that the calcium is present in the quantity the formula predicts, and that is the half of the identity the water cannot supply.

The ratio: one calcium to two lactates

The formula fixes the ratio at one calcium ion to two lactate ions: 40.08 g of calcium to 178.14 g of lactate. That is 18.37% calcium in the anhydrous salt and 13.00% once five waters are added. A lot above 18.4% calcium cannot be calcium lactate alone; a lot below 13.0% is either diluted or carrying more water than the window allows.

The water result converts to a hydrate number: n = 12.11 × water ÷ (100 − water). At 25.0% water that gives 4.0, and a full pentahydrate at 29.2% gives 5.0. The catalog window of 22.0–27.0% spans roughly 3.4 to 4.5, which is why the certificate has to be read as a pair of figures rather than as a name. The dryer removes part of the crystal water, the grade keeps the name of the fully hydrated form, and the water result reports what the lot actually carries. That is not a defect; it is the reason the water figure belongs on the certificate at all.

The pair also runs as a check. Calcium on the as-is basis should equal assay × (100 − water) × 0.1837. A lot at 14.0% calcium and 27.0% water implies a dried-basis assay near 104%, which is outside the window; either the calcium or the water is wrong, or the powder is not a pentahydrate. Run the sum before accepting a certificate whose figures were not reconciled.

X-ray diffraction and the solid state

X-ray diffraction answers the solid-state question: is the powder crystalline, and does the pattern match a pentahydrate reference or an anhydrous one? The two hydrates have different unit cells, so the pattern separates them in a way a calcium titration cannot, and it also catches an amorphous dilution and compares lots from two sources.

XRD is not a purity assay and it does not measure the counter-ion. Ask for the reference pattern and the detection limit before accepting a statement that the pattern matches. For a disputed lot, XRD plus calcium plus water is stronger than any one of them.

What substitution looks like

Substitutions and the signals they leave
AdulterantWhat it doesSignalTest
Anhydrous saltRaises calcium, lowers waterCalcium above 14%, water below 22%Karl Fischer, XRD
Calcium carbonateRaises calcium sharply; reacts with acidCalcium far above 14%; gas with acidAcid test, titration, XRD
Citrate or malateA different anion with a similar powderHPLC retention differs; calcium differsHPLC, IR
Sugar or maltodextrinDilutes the saltCalcium and assay low togetherMass balance, HPLC
Added waterLowers the as-is calciumWater high, dried-basis assay normalKarl Fischer

Colour is the weakest signal: white to off-white covers the pentahydrate, the anhydrous salt and most diluents. The stronger signals are the calcium figure, the lactate retention and the water. A certificate that reports appearance and an assay percentage but not the water has left the most likely substitution untested.

How to write identity into the specification

  • “Calcium lactate pentahydrate, CAS 5743-47-5, C6H10CaO6·5H2O.”
  • “Assay 98.0–101.0% on the dried basis by complexometric titration; calcium 13.0–14.0% as-is.”
  • “Water 22.0–27.0% by Karl Fischer, reported with the calcium result.”
  • “Identification by IR and by HPLC against a lactate standard; calcium confirmed by the oxalate reaction.”
  • “X-ray diffraction pattern consistent with the pentahydrate where the hydrate is disputed.”
  • “No anhydrous salt, calcium carbonate or other calcium source added.”

Five questions for the supplier

  1. Which hydrate is this lot, and what is the water result by Karl Fischer?
  2. What is the calcium result, and on which basis is the assay reported?
  3. Can you send the HPLC chromatogram and the IR spectrum, not only the percentages?
  4. Do the calcium, water and assay figures reconcile on the hydrate line?
  5. If the lot is disputed, will you accept a joint re-test on the retained sample?

Five direct answers amount to an identity file; a calcium percentage does not. The product hub carries the catalog limits; the COA page shows where each figure sits on the certificate; the grades page compares the hydrates; the pentahydrate versus anhydrous page covers the mass consequences. The method notes describe the titration, the chromatography and the diffraction, and the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation