05 Compliance

The regulatory file for calcium lactate

Technical document 05 · Reviewed 2026-11-19 · Calcium Lactate

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Claims and the label
  6. Documents the file needs
  7. Checklist before the first order

Calcium lactate reaches a finished product by two different routes, and the file has to name the one that applies. In the European Union the material can fall under the food-additive entry E 327 or under the food-supplement rules for calcium sources; in the United States it is a dietary ingredient or a food ingredient, and the label question follows from which. The buyer's regulatory team confirms the route for the destination, and this page lists the documents and checks that file needs.

In one line

Calcium lactate stands at a junction of two EU routes, the additive entry and the calcium-source list, and the buyer's regulatory team confirms which one covers the drum and the label.

What the file contains

A complete file answers four questions: which material and which specification version, which lot and what its certificate reports, which limits and label rules apply to the finished product, and what changes if the source, the process or the pack changes. The certificate answers the lot, the technical data sheet answers the specification, and the safety data sheet answers handling. None of them answers the route on its own.

The file should also carry the allergen and GMO statements, the origin record, the residual-solvent statement, the particle-size and bulk-density data, and a food-contact declaration for the pack. Where a statement is not available, name the gap before the order rather than discovering it at the port. A document list with version numbers beats a folder of undated files.

European Union

The additive route runs through Regulation (EC) No 1333/2008 on food additives and the specifications in Commission Regulation (EU) No 231/2012, where the entry for calcium lactate, E 327, sets its own assay and impurity figures. That specification is a different gate from the catalog range on this page: a lot can meet the catalog and still need the additive limits confirmed.

The supplement route runs through Directive 2002/46/EC, whose Annex II lists the calcium sources that may be used in food supplements and refers to purity criteria for them. Labelling follows Regulation (EU) No 1169/2011, with calcium declared in milligrams and as a percentage of the 800 mg reference intake in Annex XIII. Contaminants follow Regulation (EU) 2023/915, read in its current consolidated text.

Which route covers a given drum is a question about the finished product and the market, not about the powder alone. A supplement maker and a beverage maker can buy the same lot under different rules, so the buyer's regulatory team confirms the route as of this review, because the entries and their conditions change.

United States

The first question is whether the material is a dietary ingredient in a supplement or an ingredient in conventional food. For a supplement, the Supplement Facts panel declares elemental calcium against a 1,300 mg Daily Value, and the ingredient list names calcium lactate; 21 CFR 101.36 is the labelling reference. For a conventional food, the ingredient has to be used in a way that is consistent with its regulatory status, and the buyer's team confirms the basis and keeps the evidence in the file.

The label and any claim are reviewed separately from the certificate. A certificate does not approve a claim, and a claim does not change the specification.

Contaminants and limits

The contaminant panel is a finished-product calculation as well as a drum result. The catalog limits are the starting point; the destination text and the daily dose decide the final limit, and the file should show both so a reviewer can see the conversion.

Catalog limits and what the destination file adds
ParameterCatalog limitWhat the file adds
Lead (Pb)≤3 mg/kgThe lot result, the method and the finished-product calculation
Arsenic (As)≤2 mg/kgThe agreed limit and the method, stated on the certificate
Cadmium (Cd)≤1 mg/kgThe lot result and any category exception that applies
Mercury (Hg)≤0.1 mg/kgThe lot result and the method
Water22.0–27.0%The hydrate figure the certificate must pair with the calcium result

For an additive grade, the E 327 entry is read in place of the catalog window rather than on top of it. Two sets of figures on one certificate invite the reader to pick the kinder one, so the file should state which specification the lot was released against.

Claims and the label

A nutrition claim about calcium has conditions attached. Under Regulation (EC) No 1924/2006 and its annex, a claim that a product is a source of calcium needs at least 15% of the 800 mg reference intake in the portion offered, and a high-calcium claim needs 30%; for a food supplement the portion is the daily dose. Check the numbers against the fill weight, because a 200 mg calcium serve is 25% of the reference intake and sits between the two thresholds, as the rules stand at this review.

No disease-related claim belongs on the pack or in the file. The claim review is the brand's, and it applies to the finished product, the dose and the market rather than to the raw material. In the United States the same split holds: the Supplement Facts panel is a declaration, and a statement about the product's effect is a separate regulatory question.

Documents the file needs

A first shipment usually needs the specification, the batch COA, the technical data sheet, the safety data sheet, an allergen statement, a GMO statement, a country-of-origin statement, a residual-solvent statement, a statement on animal-derived inputs for the BSE and TSE file, a food-contact declaration for the pack under Regulation (EC) No 1935/2004, and any halal or kosher certificate the market asks for.

Each document should carry a version, a date and the product name with its hydrate. A specification that says only “calcium lactate” is ambiguous between the pentahydrate and the anhydrous salt, and that ambiguity is a common reason a file stalls in review.

Checklist before the first order

  • Specification version, CAS number and the hydrate are named.
  • The route for the destination is confirmed by the buyer's regulatory team.
  • COA, specification, SDS, allergen, GMO and origin statements are on file.
  • The contaminant results are converted to the finished-product dose.
  • The label and the claim have been reviewed for the market and the dose.
  • The source, process, mesh and pack are under change control.

The product hub carries the catalog specification; the COA page explains the lot certificate; the hydrate comparison covers the mass and label arithmetic. The quality page describes the release file, and the EU regulatory note gives the framework references.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation