02.1 Pentahydrate vs anhydrous

Pentahydrate or anhydrous: the calcium figure and the fill weight

Technical document 02.1 · Reviewed 2026-11-19 · Calcium Lactate

On this page
  1. Two forms, one salt
  2. Where the calcium figure comes from
  3. The fill weight follows the claim
  4. Capsules, tablets and the unit count
  5. Sticks, water and the handling line
  6. What the label declares
  7. Choosing one form for a product

Calcium lactate pentahydrate is 13.0% calcium and the anhydrous salt is about 18.4%, so one gram of the anhydrous form does the work of about 1.41 g of the hydrate. At a 200 mg calcium claim that is 1,087 mg against 1,538 mg, a difference of about 450 mg in every capsule, tablet or stick. The calcium figure is the whole argument: the two powders are the same salt, and the water of crystallisation is what stands between them.

In one line

The hydrate and the anhydrous salt carry the same calcium per molecule, so the only real difference is how much water travels with each gram, and every fill weight follows from that.

Two forms, one salt

Calcium lactate is the calcium salt of lactic acid: one calcium ion to two lactate ions. The pentahydrate holds five water molecules in the crystal and the anhydrous salt holds none, which gives molecular weights of 308.29 and 218.22. The difference, 90.07, is exactly five waters.

That water is 29.2% of the pentahydrate by mass, and it sits in the lattice rather than on the surface. It becomes free water only when the crystal dissolves, so a dry pentahydrate does not feel damp. It is not a wet powder; it is a heavy one.

Where the calcium figure comes from

The calcium figure is fixed by the formula and diluted by the water. In the anhydrous salt, 40.08 of 218.22 mass units are calcium, which is 18.37%. Add five waters and the same calcium is spread over 308.29 units, which gives 13.00%. The ratio between the two figures, 1.41, is the ratio of the molecular weights, and it holds for any lot that is really the form it claims.

On a certificate the pair of figures locates the lot. A 99.0% dried-basis assay with 25.0% water gives 0.99 × 0.75 × 18.37 = 13.64% calcium, and 13.6% calcium with 26.0% water implies an assay of about 100%. Run that sum before recalculating a fill weight: three figures that do not reconcile are describing a different powder.

Calcium in one gram of powder
FormCalcium per gramPowder for one gram of calcium
Pentahydrate at 13.0%130 mg7.69 g
Anhydrous at 18.4%184 mg5.43 g
Anhydrous against pentahydrate54 mg more, about 41%2.26 g less, about 29%

The fill weight follows the claim

The fill weight is the label claim divided by the calcium fraction of the form in the drum. The table runs the sum for the usual calcium claims, using theoretical figures rather than a batch result. Round once at the end, and use the lot's own calcium figure for the batch record.

Fill weight for a calcium claim
Calcium claimPentahydrate at 13.0%Anhydrous at 18.4%
100 mg769 mg543 mg
200 mg1,538 mg1,087 mg
500 mg3,846 mg2,717 mg
800 mg, the EU reference intake6,154 mg4,348 mg

Read it the other way as well. A 1,000 mg scoop of pentahydrate delivers 130 mg of calcium, and the same scoop of the anhydrous salt delivers 184 mg. Keep the scoop, change the hydrate, and the dose has moved by 41% without touching the label.

Capsules, tablets and the unit count

A size 00 capsule holds roughly 500–700 mg of a mineral powder, so a 200 mg calcium claim is three capsules of the hydrate at about 513 mg each, or two of the anhydrous salt at about 544 mg each. The dense form saves a capsule; the hydrate needs a third one or a larger shell.

At 500 mg of calcium the hydrate is 3.85 g, beyond a single swallowable tablet for most consumers, and the anhydrous salt is 2.72 g, a large tablet but a practical two-tablet serving. At 100 mg the anhydrous salt is a 543 mg tablet against 769 mg: smaller, not stronger.

Sticks, water and the handling line

Sticks and drinks are where the mass shows most. A 5 g stick of the hydrate carries 650 mg of calcium; the same stick of the anhydrous salt carries 920 mg. At a 200 mg claim the hydrate takes 1.54 g of the stick and leaves 3.46 g for flavour, sweetener and acid, while the anhydrous salt takes 1.09 g and leaves 3.91 g. That extra room is why a high-calcium stick is usually built on a denser salt.

One caution about the water. The 29.2% in the hydrate is bound in the lattice, so it does not raise the water activity of the powder and it does not make the stick damp. It joins the drink only when the powder dissolves, and 450 mg of water in a 200 mL serve is not measurable there. The reason to prefer the anhydrous form in a stick is mass and flow, not moisture.

The anhydrous salt is hygroscopic: an open drum in a humid plant gains water, and a lot that has gained water carries less calcium per gram than its certificate says. Weigh it from a sealed container and record the water figure at receipt.

What the label declares

In the European Union a food supplement declares calcium from the permitted sources in Annex II to Directive 2002/46/EC, in milligrams and as a percentage of the 800 mg reference intake in Annex XIII to Regulation (EU) No 1169/2011. In the United States the Supplement Facts panel declares elemental calcium against a 1,300 mg Daily Value, and the ingredient list names the salt.

The ingredient list reads “calcium lactate” for either hydrate, so the hydrate lives in the specification rather than in the ingredient name. That is why the switch is easy to make by accident. The declared calcium is the anchor: 200 mg on the panel means 200 mg from the weighed powder, and that powder moves by 41% with the form.

If the specification names the pentahydrate, an anhydrous lot is a change of ingredient rather than a change of supplier. The declaration, the fill weight and the batch record move together, and the change belongs in written change control.

Choosing one form for a product

Choose the pentahydrate when the specification or the market file names it, when the plant handles powder in humid air, and when the fill has room for the mass. It is the form the catalog describes, at 40 mesh. Choose the anhydrous salt when the calcium claim is high and the unit is small: a two-capsule serving, a compact tablet, a high-calcium stick. It buys mass and unit count, and it asks for a sealed, dry handling line and a water check at receipt.

The product hub carries the catalog limits; the grades page places this comparison in the wider range; the COA page shows how the calcium and the water are reported; the calcium carbonate page covers the densest common calcium salt; the compliance page covers the label rules.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation