Boron bisglycinate: MOQ, packaging and ordering
The minimum order is 1 kg in a foil pouch, the bulk pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. The 5% and 10% boron grades are separate specifications, so the grade belongs in the enquiry before a pack is booked. Everything else on this page follows from those three numbers.
A kilogram is the smallest quantity that carries its own lot code, certificate and retained sample; the grade has to be named before that pack is built.
Why the run starts at one kilogram
One pouch divides into three useful portions: the trial itself, a portion kept for reference, and a portion an outside laboratory can test without consuming either of the others. That is what turns a pack into a qualification unit rather than a scoop of powder, and it is also why the pouch ships as a parcel instead of a pallet.
Anything smaller is normally cut from a larger lot and repacked. The material does not change, but the pack identity does, and a split has to be recorded as a repack rather than sold as a catalog pack. The 25 kg drum is the other end of the same logic: less handling per kilogram, more capital tied up in inventory, and a longer stretch between the first and last use. The floor comes from the pack, not from an attempt to push volume.
Packs, grades and formats
| Pack | Grade | Net weight | Typical use |
|---|---|---|---|
| Foil pouch | 5% or 10% boron | 1 kg | Trial, retain, small batch |
| Fiber drum | 5% or 10% boron | 25 kg | Production |
| Granulated powder | Grade as agreed | On request | Tableting and dust control |
| Diluted premix | Boron figure as agreed | On request | Very low-dose blends |
The catalog material is a white to off-white powder at 5.0–6.0% boron, ≥95% through 40 mesh, packed in a pouch with a moisture barrier. Granulation and dilution are changes to the specification rather than to the bag: both move the mesh or the boron figure, and both have to be written into the specification before the certificate is issued. If the dosage form needs a coarser powder or a lower boron figure, raise it at the enquiry stage.
Lead time, dispatch and documents
Order confirmation starts a 1–7 day window that covers picking, paperwork and dispatch. Transit, customs clearance and the customer's own quality release sit outside it. A granulated or diluted grade adds preparation time, and a first shipment to a new destination usually adds document work as well, so the two are quoted separately rather than folded into the standard figure.
Ask for a dispatch date rather than a lead time alone. A drum may travel on a pallet while a pouch travels as a parcel, and the trade term decides who books freight and who handles customs. The certificate and the specification should be on their way with the lot; a document set that arrives after the material has already delayed the receiving inspection.
What makes an enquiry quotable
Six points turn an enquiry into an offer that can be compared with another:
- Material and grade. Boron bisglycinate at 5.0–6.0% boron, or the 10% grade, with the figure written out rather than implied by the product name.
- Specification revision. Boron, glycine, moisture, mesh, metals and microbiology, and the version the certificate will be issued against.
- Number of packs. Pouches or drums, and whether a granulated or diluted variant is wanted.
- Destination and trade term. Country, port or address, and the Incoterm.
- Documents. COA, specification, safety data sheet and any statement the importer has to hold.
- Use and market. Capsule, tablet, blend or liquid, and the country where the finished product will be sold.
An enquiry without the grade cannot be checked against a specification, and one without the market cannot be checked against a route. Commercial terms are given on the quotation, not on this page.
A sample that can be defended
The pouch is the qualification sample. Run boron, glycine, moisture and microbiology on it before scaling, and keep material back from the same pack. The lot code should be identical on the sample label, the certificate and the quotation; if it differs, the sample does not qualify the lot it was drawn from.
A bench trial that needs less than a kilogram should be discussed before the order: material cut from a bulk lot becomes a repack with its own traceability and should be documented as one. It is also worth asking whether the trial pouch and the production drum will be drawn from the same lot family, since a successful trial on another lot is only half a qualification.
Terms beyond the quotation
The quotation sets the commercial terms, the pack, the dispatch window and the document set. The quality terms sit beside them: which specification revision applies, a certificate for every lot, material kept for reference, the retest period, and the route for a source or process change. A quality agreement is easier to settle before the first production order than after the first disagreement.
Returns and replacements follow the quotation and that agreement. A lot that fails the agreed specification is settled on the retained sample with a joint re-test rather than on a photograph of the powder, and it helps to agree in advance which laboratory both sides accept and who commissions the referee test.
The catalog figures sit on the product hub; the release tests are on the COA page; the grade arithmetic is on the grades page; the market questions are on the compliance page. The MOQ glossary entry defines the term, and the logistics page covers shipping and documents.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation