01 COA & batch testing

What the COA for wheat germ oil actually contains

Technical document 01 · Reviewed 2026-11-19 · Wheat Germ Oil

On this page
  1. Reading the certificate as evidence
  2. The profile is a share, not a mass
  3. Release limit, batch result and the arithmetic
  4. What moves between batches
  5. When to order an outside test
  6. Six lines that decide whether two quotations match

A wheat germ oil certificate reports three measurements that are easy to confuse: the fatty-acid profile by GC, the free fatty acid expressed as oleic acid, and the peroxide value. Alongside them it carries moisture, appearance, heavy metals and microbiology, each tied to a method and a limit. The limits here are the catalog specification; the batch COA records what one lot measured.

In one line

A wheat germ oil certificate is only complete when the fatty-acid profile, the free fatty acid and the peroxide value are reported together, each with its method.

Reading the certificate as evidence

A certificate can be audited only if each row names the test, the method, the basis and the limit. “Conforms” alone leaves a verdict without a trail. For an oil the basis matters as much as the number.

Identity is not the linoleic line: the whole profile has to agree with the reference, including the minor acids. A lot can reach 55% linoleic and still be a blend.

Identity, composition and oxidation limits · cold-pressed wheat germ oil · CAS 8006-95-9
ParameterMethodRelease limitReported on
Linoleic acid (C18:2)GC-FID of fatty-acid methyl esters50.0–60.0%Share of total fatty acids
Oleic acid (C18:1)GC-FID15.0–25.0%Share of total fatty acids
Palmitic acid (C16:0)GC-FID15.0–20.0%Share of total fatty acids
Free fatty acidTitration; expressed as oleic acid≤0.50%Oil as sold
Peroxide valueAOCS Cd 8b-90 or ISO 3960≤5.0 meq O₂/kgOil as sold
MoistureKarl Fischer≤0.1%Oil as sold
IdentificationGC profile against a reference oilProfile conformsTotal fatty-acid profile
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kgOil as sold
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absentOil as sold

Appearance is qualitative: dark yellow to brownish, clear to slightly hazy. A wax sediment is normal in a cold-pressed oil; a duller colour or a paint-like smell points to oxidation and should be read with the peroxide value.

The profile is a share, not a mass

The GC result is a normalised share, not a weight per bottle. Area normalisation divides each peak by the total identified area; internal standardisation gives an absolute mass. For a specification written as “50.0–60.0%”, the first basis is the usual one, and the certificate should say so. A 55% figure means 55% of the fatty-acid methyl esters, not 55 g of linoleic acid in every 100 g of oil.

Free fatty acid measures the acids released by hydrolysis, not the total fatty acids in the triglyceride. It is expressed as oleic acid by convention, even in an oil whose oleic share is only 15–25%. A low FFA means little hydrolysis has occurred; it says nothing about the linoleic share.

The peroxide value measures hydroperoxides, the first stable products of oxidation, in milliequivalents of oxygen per kilogram. It rises before the odour and colour change. FFA and PV move for different reasons: water and heat drive hydrolysis, while oxygen, light and trace metals drive oxidation.

Moisture is the third variable. The ≤0.1% limit is tight for an oil and matters because water shifts the hydrolysis equilibrium. A lot close to the limit has less headroom in a humid warehouse, and the pack seal becomes part of the specification.

Release limit, batch result and the arithmetic

The specification fixes the boundary; the certificate should show what this lot did against it. That means two columns — the limit and the measured result — with a method note for each row. A result column that simply repeats the range has not measured anything.

What the result column should contain
ParameterRelease limitResult column
Linoleic acid50.0–60.0% of fatty acidsMeasured area percentage, with column, standard and chromatogram
Free fatty acid≤0.50% as oleic acidMeasured percentage and the titration method
Peroxide value≤5.0 meq O₂/kgMeasured value, method and test date
Moisture≤0.1%Measured percentage by Karl Fischer
Heavy metalsPer elementA measured figure in mg/kg for each element

“Passes specification” should be reachable from the numbers. Heavy metals need a figure per element, not one sum; microbiology a count plus an absence statement; the profile the three major acids and the chromatogram.

A lot released at 4.5 meq O₂/kg is inside the catalog limit and has less shelf life than one released at 1.0. The release result and the storage history decide how the lot behaves in a softgel or an oil blend; the stability page takes that further.

What moves between batches

Wheat germ oil is an agricultural product. Variety, region, crop year and the germ fraction change the linoleic, oleic and palmitic shares, usually within the catalog ranges. A lot at the edge of the linoleic range has less room for blending or for refining losses.

The process moves the minor fraction more than the profile. Cold pressing keeps tocopherols, phytosterols and waxy sediment; refining removes part of them along with colour and odour. A switch from cold-pressed to refined can leave linoleic almost unchanged and still be a different material for the label.

Colour and odour are the practical early signals. Cold-pressed oil is dark and strongly nutty; refined oil is lighter and milder. A batch that turns noticeably darker or rancid should be reviewed with its PV and FFA, not rejected on appearance alone.

When to order an outside test

Outside testing is worth ordering in four situations: a source you have not used, a first shipment to a regulated market, a release that is disputed, and a wheat or gluten statement on the label. Ask for GC-FID with the chromatogram, column, standard and integration; sterol and tocopherol profiles; FFA and PV by named methods; moisture by Karl Fischer; ICP-MS for the metals; and microbiology.

If a gluten-free or wheat-free statement is planned, add a protein or gluten test with a validated method and a stated limit of quantification. An oil matrix is not a flour matrix, so the extraction has to be fit for the material. “Not detected” without a detection limit tells you how far the method can see, not whether the substance was there.

Keep the chain of custody: the sample tested should be the retained sample, and the report should carry the lot code on the bottle or drum. A contested result goes back to the retained sample, the certificate and the agreed specification.

Six lines that decide whether two quotations match

Compare six lines: grade and process; profile basis and chromatogram; FFA and PV with methods and test dates; moisture; allergen statement; pack and lot trace. Two offers that both say “wheat germ oil 55% linoleic” can differ on every one.

The catalog specification sits on the wheat germ oil product page. The tests that separate wheat germ oil from another seed oil are on the identity page; the grade fork is on the grades page. The methods behind the numbers are described in the analytical methods index, and the release workflow is on the quality page. The carrier-borne version of the same logic is on the flaxseed oil powder page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation