The regulatory file for wheat germ oil, wheat allergen included
Wheat germ oil is a wheat-derived oil, and the wheat source is the first fact in the regulatory file. The oil is a food ingredient, but the allergen declaration, the contaminant limits and the destination route have to be confirmed before the label is signed. The buyer's regulatory team confirms the route; the supplier supplies the source and lot evidence.
Wheat germ oil is a wheat-derived ingredient before it is an oil, so the allergen declaration and the destination route are part of the specification.
What the file has to answer
A complete file answers four questions: what the material and its specification are; which lot is released and what its certificate reports; which limits and label rules apply; and what changes if the source, process or pack changes. The certificate answers the lot question, the TDS the specification and the SDS the handling; none answers the route alone.
Wheat allergen statement. Wheat is the source of this oil. Wheat is a gluten-containing cereal in Annex II to Regulation (EU) No 1169/2011, a major US allergen under FALCPA, and a named UK allergen. The oil is pressed from the germ; a cold-pressed oil is not highly refined, so protein carry-over cannot be assumed to be zero. The working position is to declare the wheat source unless the lot has protein and gluten evidence and the destination advice supports another position. A “wheat-free” statement is not available for this material, and “gluten-free” needs a validated result against the destination threshold; the catalog sets no gluten limit.
European Union
Directive 2002/46/EC harmonises vitamins and minerals for food supplements; plant oils are left to national rules. The buyer's regulatory team names the route for the member state and checks that the specification describes the material actually sold there. Novel-food status is part of that check: the buyer confirms whether the destination handles the oil as a conventional ingredient with a history of use or requires a novel-food assessment, and the file carries the evidence.
Labelling follows Regulation (EU) No 1169/2011. Annex II names cereals containing gluten, so the wheat source must be emphasised in the ingredient list unless a documented assessment supports another reading. Claims fall under Regulation (EC) No 1924/2006; a gluten-free or very low gluten claim is a separate rule under Regulation (EU) No 828/2014, with limits of 20 and 100 mg/kg on the food as sold. Contaminants are governed by Regulation (EU) 2023/915, which sets levels by food category; check the current text.
United States
In the United States the oil is sold as a dietary ingredient or a food ingredient. A dietary supplement must meet the cGMP in 21 CFR 111 and carry a Supplement Facts panel under 21 CFR 101.36. Wheat is a major food allergen under FALCPA, and the label must declare it unless the ingredient falls inside the statutory exception for a highly refined oil derived from a major allergen. A cold-pressed oil is not that exception by default, so plan the declaration on the wheat source and document any exception lot by lot.
US federal law sets no heavy-metal maximum for supplements; in practice California's Proposition 65 governs, with a maximum allowable dose level for lead of 0.5 µg/day. An EU-compliant lot may still fail that calculation. US gluten-free labelling under 21 CFR 101.91 requires less than 20 ppm gluten, plus the rule's other conditions.
United Kingdom
In Great Britain the Food Supplements (England) Regulations 2003 and their Scottish and Welsh counterparts still apply as retained law; the allergen list is the retained Annex II, with wheat named. Northern Ireland applies EU food law under the Windsor Framework, so one UK launch can face two rule sets. GB claims follow the retained nutrition and health claims rules; read the current text.
Contaminants and limits
Contaminants are judged at the finished-product level, not at the drum. The destination text and the daily dose set the number that matters.
| Metal | Catalog limit | Usual supplement reference |
|---|---|---|
| Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg in the supplement |
| Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg in the supplement |
| Mercury (Hg) | ≤0.1 mg/kg | 0.1 mg/kg in the supplement |
| Arsenic (As) | ≤2 mg/kg | No harmonised EU supplement maximum; customer limit |
The catalog panel is a specification, not a statement that every destination applies the same numbers. Regulation (EU) 2023/915 sets levels by food category; an oil and a supplement can fall under different entries, so the same lot can pass one gate and fail the other. Confirm the category and convert the result to the finished-product dose. Wheat allergen is a labelling question, not a contaminant, and is handled above.
Where the claim line sits
Disease claims are not allowed in the EU, the US or the UK. EU and UK wording must match an entry in the authorised register and its conditions; a US structure/function claim needs substantiation and a 30-day FDA notification under 21 CFR 101.93. Linoleic acid is declared as a nutrient, and a nutrient figure is not a health claim.
Vitamin E is the claim usually attached to wheat germ oil. If the label declares vitamin E, the tocopherol content has to be measured and the declaration made on the label's basis; it cannot be inferred from the oil's reputation. The wording must still come from the register or the notified statement. No claim wording is offered here; the brand's reviewer supplies and signs it.
The document pack
| Document | What it must show | Why it is needed |
|---|---|---|
| Certificate of analysis | Each lot's measured results, methods and limits, metals and micro included | Proves the released lot |
| Technical data sheet | Grade, profile, FFA, PV, moisture, pack and storage | Turns the specification into a working document |
| Agreed specification | The limits this lot was accepted against | Lets two suppliers be compared |
| Source and allergen statement | Wheat origin, germ, process and the allergen position | Supports the Annex II and FALCPA review |
| Gluten or protein result | Method, limit of quantification and result, where a claim is made | Backs a gluten statement |
| GC chromatogram | Profile, column, standard and integration | Shows the oil's identity |
| Origin and trace record | Site, lot code and manufacture date | Recall and audit trail |
A certificate is persuasive only beside the specification, the source statement and the chromatogram; alone it proves little.
Checklist before the first order
- Specification version, CAS number and grade are named.
- COA, TDS, SDS, allergen, GMO, origin and process statements are on file.
- The wheat allergen assessment and the label wording are reviewed for the destination.
- Any gluten claim has a validated result and the destination threshold behind it.
- The contaminant results are converted to the finished-product dose.
- Claims are reviewed against the register or the notification.
- Source, process and pack are under change control.
The wheat germ oil page sets out the catalog specification, the COA page shows how the lot is released, and the identity page covers the analytical evidence. The release file itself is described on the quality page; the methods index explains the tests. The flaxseed oil powder page shows the same file for another oil.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation