04 MOQ & ordering

Sea buckthorn oil: MOQ, packing and ordering

Technical document 04 · Reviewed 2026-11-19 · Sea Buckthorn Oil

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation has to state
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

The MOQ for sea buckthorn fruit oil is 1 kg, supplied in an amber bottle; the production pack is a 25 kg HDPE drum. Lead time is 1–7 days for the standard pack, and a powder on a carrier is quoted separately. A firm quotation needs six details: the plant part, the specification, the quantity and pack, the destination and Incoterm, the documents, and the intended market.

In one line

One kilogram is the minimum because it is the smallest pack that can be filled, sealed, sampled and traced as a lot without decanting a drum.

Why the minimum is 1 kg

A 1 kg bottle covers a bench trial, a retained sample and an independent fatty-acid test. It is small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed, and it is a commercial unit with its own lot code rather than a scoop taken from a drum. The bottle is filled and closed at the supplier, so the headspace and the closure are known quantities.

Below 1 kg the oil is usually drawn from a larger lot and repacked. Handling goes up, the oil meets air, the original pack identity is gone and tracing the lot becomes harder, while the oil itself is unchanged. The 25 kg drum is the bulk unit: fewer handling steps per kilogram, but it ties up stock and sits open for longer. The minimum is a pack decision, not a volume incentive.

Packs and formats

Standard sea buckthorn fruit oil packs
PackNet weightTypical useNotes
Amber glass bottle1 kgTrial, sample, small batchLight barrier; fill to the shoulder; screw closure
HDPE drum25 kgProductionOpaque; inner liner and tamper-evident closure
Powder on carrierOn requestTablets, stick packsOil load declared; own specification
Nitrogen-flushed packOn requestLong holdReduced headspace oxygen; agreed in writing

The glass bottle is the better oxygen and light barrier; the drum is the practical bulk container, but its wall lets a slow amount of oxygen through and its closure is only as good as the liner. Whichever pack is ordered, the fill height matters: an oil filled to the shoulder of a bottle leaves little headspace, while a drum filled short carries an air pocket that grows as the oil is drawn down. Ask for the fill weight and the headspace to be stated on the specification.

Lead time and dispatch

Dispatch for the standard pack is quoted at 1–7 days after the order is confirmed. The clock covers picking, paperwork and handover to the carrier; transit time, customs and the customer's own quality release sit outside it. A powder on a carrier, a nitrogen flush or a non-standard pack adds time, and the quotation should show that as a separate line rather than leave it to the dispatch week.

Get the dispatch date in writing, not just the lead time. A drum usually moves on a pallet while a bottle goes as a parcel, and the Incoterm fixes who books the freight and who clears the entry. Send the documents with the lot rather than after it: oil that reaches the warehouse ahead of its certificate waits for release and ages while it waits.

What a quotation has to state

Six details make a quotation firm enough to compare:

  1. Material and plant part. Fruit oil or seed oil, written with the botanical name so there is no doubt which fraction is quoted.
  2. Specification. The fatty-acid profile, free fatty acid, peroxide value, moisture, appearance and any added preparation, with the revision number.
  3. Volume and pack. How many 1 kg bottles or 25 kg drums, and whether a powder on a carrier or a flushed pack is needed.
  4. Delivery and trade term. Destination country, delivery point and the Incoterm the buyer wants to work on.
  5. Paperwork. Which certificates, data sheets and market statements have to travel with the lot.
  6. Use and market. Supplement or food, and the country where the finished product will be sold.

Without the plant part and the market, two quotations cannot be compared: the same oil may fit one market and fall outside the file in another, and the paperwork is part of what is being offered. Commercial terms appear on the quotation, not here.

The sample is a lot, not a demonstration

The 1 kg bottle is the qualification sample. Test the fatty-acid profile, free fatty acid, peroxide value, moisture and colour before scaling, and keep a retained sample from the same bottle in a cool, dark place. The lot code should be the same on the bottle, the certificate and the quotation. A sample without a traceable lot is a demonstration, not a qualification.

If the project needs less than a kilogram for a bench trial, discuss it before ordering. A split from a drum is a repack with its own handling history; record it as a repack in its own right. A bench sample and a production drum are not guaranteed to come from the same lot, and a bench result should not be carried across to the drum.

Terms to settle before the first order

The commercial side of the offer — trade term, pack, dispatch window and documents — sits on the quotation. The quality side should be agreed at the same time: which specification revision applies, how the certificate is issued per lot, how the retained sample is kept, what retest period is claimed, and how a change to source or process is notified. Putting that in a quality agreement before the first production order is cheaper than arguing about it after the first delivery.

If a lot misses the agreed specification, the route is the retained sample and a joint re-test, not a photograph of the bottle. Settle in advance which laboratory both sides accept and who carries the cost of the referee analysis; returns and replacements then follow the quotation and the quality agreement.

The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers storage; the compliance page covers the market files; the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation