05 Compliance

The regulatory file for sea buckthorn fruit oil

Technical document 05 · Reviewed 2026-11-19 · Sea Buckthorn Oil

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. United Kingdom
  5. Contaminants and limits
  6. Naming the oil and making a claim
  7. The document set
  8. Checklist before the first order

Sea buckthorn (Hippophae rhamnoides) fruit oil is supplied as a food and supplement ingredient, and the buyer's regulatory team confirms the route for the destination. The file contains the specification, the lot certificate, the contaminant results, the allergen and carrier statements, and the label review. A history of use in one market is not a market authorisation in another.

In one line

The oil's history of use is not a market authorisation: the file has to show the specification, the contaminants, the carrier and the label for the destination.

What the file contains

A regulatory file has to answer four things at once: what the material is, which version of the specification is on the order, which lot the certificate covers, and which rules the finished product meets in the destination. Each of those is a different document, and a folder of undated PDFs does not answer any of them reliably.

For an oil, three statements carry more weight than they do for a powder. The first is the part of the plant, because fruit oil and seed oil are different ingredients with different names. The second is the refining and extraction history, because a solvent-extracted or refined oil brings a residual-solvent and a process question. The third is the carrier, because the powder-on-carrier format is the point at which an allergen can enter a product that is otherwise a single oil.

European Union

The EU side of the file starts with the specification, the contaminant results and the label. The general food law framework in Regulation (EC) No 178/2002, the food information rules in Regulation (EU) No 1169/2011, the contaminant maximum levels in Regulation (EU) 2023/915 and the pesticide residue regime in Regulation (EC) No 396/2005 apply alongside whatever specific route the ingredient has. If the novel-food question is live, Regulation (EU) 2015/2283 and the EU novel-food catalogue are the texts the buyer's team works through; consumption history in one member state is not proof for another.

Directive 2002/46/EC provides the supplement framework, but ingredients other than vitamins and minerals are mostly a member-state matter. That is why the destination belongs in the specification conversation rather than the shipping one. As of this review, use the consolidated texts and check them again before the order.

United States

In the United States the question is which dietary ingredient or food substance is being sold and what supports its use. DSHEA and the Federal Food, Drug, and Cosmetic Act set the supplement framework; 21 CFR 111 covers manufacturing practice, and 21 CFR 190.6 is the notification route a buyer evaluates when the ingredient has no listed basis. A structure or function statement for a supplement is handled under 21 CFR 101.93 and is kept separate from any disease claim.

If the destination use is a conventional food rather than a supplement, 21 CFR 117 preventive controls and the labelling rules in 21 CFR 101 apply instead. The supplier should state the basis it relies on and identify the document behind it; the buyer decides whether that basis covers the finished product.

United Kingdom

Great Britain and Northern Ireland do not share one file. For Great Britain, the current GB register and GB labelling rules apply, with the Food Information Regulations 2014 among the instruments to check; Northern Ireland continues under the EU framework. The buyer's team records which regime the destination falls under and files the evidence with the order.

Contaminants and limits

A contaminant result is measured on the ingredient but judged on the finished product. The table is a starting point for the supplement file; the destination text and the daily dose give the final number.

Contaminant limits to confirm for the dose
ParameterUsual supplement referenceEvidence to keep
Lead (Pb)3.0 mg/kg in the finished supplementLot result with method, the limit and the dose calculation
Cadmium (Cd)1.0 mg/kg in the finished supplementLot result and the exception that applies, if any
Mercury (Hg)0.10 mg/kg in the finished supplementThe measured figure and the analytical method
Arsenic (As)Customer or market limitThe agreed limit and method, written into the certificate
PAH4Market text on requestResults for the four markers where a level is set
Mineral oil hydrocarbonsCustomer limitMOSH and MOAH data where the buyer's file asks for them
Pesticide residuesRegulation (EC) No 396/2005Residue statement and the scope of the screen
Residual solventsDepends on the extraction routeSolvent named and limit stated, if a solvent was used

For an oil the oxidation values sit in the same file as the contaminants: a rancid lot is a quality failure even when every metal result is compliant. The peroxide and p-anisidine values are on the certificate, and the file should show how they were converted to the finished dose.

Naming the oil and making a claim

Describing the oil and quoting its fatty-acid composition is a statement about the material, not a health claim. Anything beyond that is a separate review: in the EU, Regulation (EC) No 1924/2006 and the EU Register of nutrition and health claims govern the wording; in the US, the structure or function rules do. A phrase such as an omega-7 figure or a “high in” statement is checked before printing.

No claim is approved by a certificate, and no wording change alters the specification. This page makes no disease-related claim for the oil; the brand's reviewer signs off the label wording for the product, the form and the market.

The document set

  • Specification with a version number and the plant part named.
  • Certificate of analysis for the lot, with methods and results.
  • Technical data sheet and safety data sheet.
  • Allergen statement, including the carrier for a powder format, and a GMO statement.
  • Origin, refining and extraction statement; residual-solvent statement where relevant.
  • Contaminant data, including PAH and mineral-oil results where the market file asks for them.
  • Packaging declaration and a stability summary for the pack being bought.

Checklist before the first order

  • The specification version, the botanical name and the plant part are on the order.
  • The COA, TDS, SDS, allergen, GMO, origin and refining statements are filed.
  • Contaminant results are converted to the finished-product dose.
  • The label and any claim have been cleared for the destination.
  • The source, the extraction route and the pack sit under change control.
  • The quotation, the specification and the certificate carry the same version.

For the catalog specification, start at the sea buckthorn oil product page. What a lot certificate should report is set out on the COA page, the analytical evidence on the identity page, the fruit-oil and seed-oil split on the grades page, and how a lot is released on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation