05 Compliance

The regulatory file for phytosterols

Technical document 05 · Reviewed 2026-11-19 · Phytosterols

On this page
  1. Four folders, one file
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Claims and the label
  6. Documents to keep on file
  7. Checklist before the first order

A phytosterol file is assembled around the material that will actually be shipped: the free sterol or the ester, the declared source, and the market where the finished product will be sold. The buyer's regulatory team confirms the route. What follows is the document set and the checks that make that review possible; no disease-related claim is made here.

In one line

A phytosterol file is specific to the form and the source: the free sterol, the ester and the stanol are not interchangeable on the label or in the market entry.

Four folders, one file

Think of the file as four folders. The first holds the specification and the technical data sheet: form, source, total sterols, profile, moisture and particle size. The second holds the lot records: certificate, methods and the basis of each result. The third holds the route: destination, finished-product category, use level and label. The fourth holds change control: what triggers a review when the source, the process or the packaging changes.

Most gaps appear at the joins. A certificate that does not name the source cannot support an allergen statement; a specification that says “phytosterols” without the form cannot support a label. List document titles and version numbers rather than keeping a folder of undated files.

European Union

Phytosterols and phytostanols sit in the EU novel-food framework: Regulation (EU) 2015/2283 and the Union list in Implementing Regulation (EU) 2017/2470. The list entry covers material presented as free sterols or esterified with food-grade fatty acids, sets the food categories and a maximum level, and adds labelling conditions. At the time of this review the maximum is 3 g/day, and the entry sets ceilings for individual sterols. Read the current consolidated text before using a figure.

Two forms can fall under the same entry and still need different labels and a different quantity basis. The buyer's regulatory team confirms that the entry covers the exact form, source and finished product; the catalog ranges on this site are not a substitute for that check. A lot can pass the catalog and still need a separate look against the entry.

Alongside the entry: Regulation (EU) 2023/915 for contaminants, Directive 2002/46/EC for food supplements, Regulation (EU) 1169/2011 for labelling, and Regulation (EC) 1924/2006 for claims. The current text governs; a summary does not.

United States

In the US, the route turns on the form, the source, the use level and the product type. Phytosterols and sterol esters can be used as dietary ingredients; a food use may rest on a GRAS basis. The supplier needs to identify the basis and show the document that supports it; the buyer confirms that it covers the finished product and the intended use. FDA does not pre-approve a dietary ingredient, so the file is the evidence.

Allergen review starts with the source. A soy-derived sterol and a sunflower-derived one do not carry the same statement, and a highly purified ingredient still needs the source reviewed. The Supplement Facts panel should name the ingredient in the form used, not just the family name.

Contaminants and limits

Contaminant limits apply to the finished product, so the drum result is only an input. The table is a starting point for a supplement file; the destination's current text and the daily dose set the final number.

Contaminant limits to confirm for the finished product
ParameterReference levelEvidence required
Lead (Pb)3.0 mg/kg in the supplementLot result, method, limit and the finished-product calculation
Cadmium (Cd)1.0 mg/kg in the supplementLot result and any category exception that applies
Mercury (Hg)0.10 mg/kg in the supplementLot result and method
Arsenic (As)Customer or market limitThe agreed limit and the method, stated on the certificate

Sterol oxidation products, residual solvents and mineral oil hydrocarbons are outside the catalog specification. Ask for them when the lot has been stored warm, when the extraction route is unclear, or when the market requires the data. A “not detected” statement without a detection limit is not a result.

Claims and the label

This page makes no disease-related claim. Nutrition and health claims follow the destination's claims framework; the brand's reviewer confirms the wording, the form and the conditions of use. A certificate is not a claim approval, and a claim cannot be used to alter the specification.

The label names the material, the source and the quantity on the right basis. For an ester that means ester mass, free sterol equivalent or total sterols, stated explicitly. For the free sterol the total sterol figure and the source statement are the minimum.

Documents to keep on file

Documents in a phytosterol regulatory file
DocumentWhy it is in the file
Specification (TDS)Form, source, total sterols, profile, moisture and physical limits
Certificate of analysisThe lot results, the methods and the basis of each figure
Safety data sheetHandling, storage and transport classification
Source and allergen statementThe plant or tall-oil source and the allergen review that follows it
GMO and origin statementThe source, the country of origin and the process route
Residual-solvent statementThe extraction and purification route
Stability summaryThe pack, the storage condition and the assigned retest period
Novel-food confirmationThe entry and conditions the buyer relies on for the destination

Checklist before the first order

  • The specification names the form, the source and the version.
  • The certificate reports the profile, the moisture basis and the contaminants for the lot.
  • The contaminant figures have been converted to the finished-product dose.
  • The label states the form and the quantity basis, and the claim review is closed.
  • The destination route has been confirmed for the exact material.
  • The source, the process and the packaging have a change-control route, and the quotation, specification and certificate share one version.

Specification: product hub. Analytical evidence: identity page. Lot reporting: COA page. Release process: quality page. Market notes: EU, US, UK.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation