What a perilla seed oil COA reports, line by line
A perilla seed oil certificate reports the fatty-acid profile by GC — alpha-linolenic, linoleic and oleic acid — beside free fatty acid, peroxide value, moisture, heavy metals and microbiology. Each line needs a method and a release limit, with the result in its own column. The catalog range is the gate; the batch COA records what one lot measured.
The ALA figure only means something beside the free fatty acid and the peroxide value, because a lot can clear one line and fail another.
Reading the certificate line by line
An auditable line says what was measured, by which method, and against which limit. Without the method the result cannot be repeated elsewhere; without the limit it cannot show what the lot passed. For an oil the identity line is the fatty-acid profile, so the chromatogram matters as much as the percentage.
| Parameter | Method | Release limit |
|---|---|---|
| Alpha-linolenic acid (C18:3 n-3) | GC-FID of fatty-acid methyl esters | 55.0–65.0% of total fatty acids |
| Linoleic acid (C18:2 n-6) | Same GC run | 12.0–20.0% |
| Oleic acid (C18:1 n-9) | Same GC run | 12.0–20.0% |
| Free fatty acid | Titration as oleic acid | ≤0.50% |
| Peroxide value | Iodometric titration | ≤5.0 meq O2/kg |
| Moisture | Karl Fischer | ≤0.1% |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
The percentages are normalised to total fatty acids, not to the weight of the oil, and the free fatty acid is expressed as oleic acid. A certificate that omits either basis has described a material it did not measure.
The basis behind the ALA figure
GC separates the methyl esters and reports each acid as a share of the total. That is not the same as grams of ALA per 100 g of oil, because the glycerol backbone and the unsaponifiable fraction sit outside the normalised figure. For a pure oil the gap is roughly four percent, so a 60.0% share is about 57 g per 100 g of oil. Both numbers can be correct, and the certificate should state its basis.
FFA measures hydrolysis — the splitting of the triglyceride into glycerol and free acids — and rises with seed damage, moisture and careless pressing. PV measures the hydroperoxides formed by oxidation, and rises with heat, light, oxygen and trace metals. A refined lot can have low FFA and a PV near the limit; a fresh press can have a clean PV and high FFA. One number cannot stand in for the other.
Acid value and FFA share the chemistry: 0.50% as oleic acid is about 1.0 mg KOH/g, so a certificate may report either if the conversion is shown. Moisture at ≤0.1% is measured by Karl Fischer, because an oil does not release its water at 105 °C like a powder.
Release limit, batch result and the two oxidation numbers
The release limit is the gate; the batch result is the measurement. Keep the two in separate columns. A result column that repeats the range is not evidence; it is the gate copied out. The useful set is the full profile rather than the ALA line alone, because the other acids make the profile a fingerprint.
| Parameter | Release limit | Result column |
|---|---|---|
| ALA | 55.0–65.0% | A measured percentage, with the GC method and the chromatogram |
| Free fatty acid | ≤0.50% | A measured percentage as oleic acid, or the acid value with the conversion |
| Peroxide value | ≤5.0 meq O2/kg | A measured figure, with the method and the test date |
Ask for the p-anisidine value even though this catalog does not set one. PV falls as hydroperoxides decompose while p-AV rises with the aldehydes that follow, so a lot can sit inside the PV limit and still be moving the wrong way. A PV of 4.8 with a high p-AV is a different oil from the same PV with a low one.
What varies from lot to lot
The seed moves the profile. Cultivar, latitude, harvest year and ripeness shift the ALA share, and a warm season can move it by several points. A supplier who quotes one fixed ALA figure is quoting a typical value, not a limit.
Pressing moves the FFA and the colour. A cold press leaves phospholipids, waxes and pigments in the oil, so the lot can be hazier and deeper in colour, with more FFA. Refining removes the free acids and pigments and part of the tocopherols: FFA falls and the colour lightens, but the oil loses some of its own protection.
Storage moves the PV. An oil can leave the press clean and arrive with a higher PV if the drum sat warm or the bottle stood in light. Colour and odour are the first signals: an oil gone duller, or smelling of paint rather than green seed, points to oxidation before the PV confirms it.
When to send a sample outside
Commission an independent test when the source is new, the destination is regulated, a release is disputed, or the ALA sits at the edge of the range. The panel is not a copy of the certificate: GC-FID with the chromatogram, FFA by titration, PV and p-AV by named methods, ICP-MS for the metals, and a sterol and tocopherol profile when the source is in question.
Every “not detected” entry is only as strong as the detection limit behind it; without that figure, the line describes the method rather than the sample. The sample tested should be the one retained, and the report should name the lot.
Six lines that separate two quotations
| Line | What to ask for | What it separates |
|---|---|---|
| Grade | Cold-pressed or refined, stated on the specification | Same name, different process |
| Profile | All named acids from one GC run | A profile from an ALA-only report |
| FFA | Result as oleic acid, or acid value with conversion | A fresh press from a hydrolysed oil |
| Oxidation | PV and p-AV, methods and dates | A fresh oil from an aged one |
| Antioxidant | None added, or the name and level declared | A declared oil from an unknown one |
| Lot trace | Lot code quoted on COA, pack and retained sample | A genuine lot from a copied certificate |
Two quotations that agree on ALA and differ elsewhere are not describing the same oil. The catalog specification sits on the perilla seed oil product page; the grade question is on the grade page, the oxidation behaviour on the stability page, and the tests that separate the oil from a blend on the identity page. The analytical methods index describes the GC, titration and ICP-MS work, and the quality page sets out the release file. The other ALA oil in the range, as a 50% powder, is on the flaxseed oil powder page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation