06 Identity & adulteration

How we prove a perilla seed oil lot is perilla oil

Technical document 06 · Reviewed 2026-11-19 · Perilla Seed Oil

On this page
  1. Four layers of evidence
  2. The profile and the ratios around ALA
  3. What XRD can and cannot do here
  4. How a substitution shows up
  5. What the identity clause should say
  6. Five questions to put in writing

A perilla seed oil lot is identified by its full fatty-acid profile — ALA, linoleic and oleic acid inside the catalog ranges — together with its sterol and tocopherol fractions, its source records and its oxidation values. One ALA percentage cannot do it, because flaxseed oil and a blend can sit in the same window. The identity file has to show the pattern, not one peak.

In one line

Identity is the whole fatty-acid profile plus the minor fractions, because one ALA number can be reached by more than one seed oil.

Four layers of evidence

A certificate can name the right species and still not prove the oil. The four layers below answer different questions, and each one needs its own result. A supplier who answers only the first has sent paperwork, not a sample.

Four layers of perilla seed oil identity
LayerQuestionEvidenceWhat it proves
DocumentIs the species, part and grade named?Botanical name, origin, process statementPaperwork only
ChromatographyIs the oil ALA-dominant with the right balance?GC-FID of the fatty-acid methyl estersThe profile, not the source
Minor fractionsDo the sterols and tocopherols fit the oil?GC of the sterols; HPLC of the tocopherolsA whole oil rather than a blend
Mass balanceIs it fresh and undiluted?FFA, PV, p-AV, moistureConsistency of the numbers

The profile and the ratios around ALA

The catalog ranges are ALA 55.0–65.0%, linoleic 12.0–20.0% and oleic 12.0–20.0%. At the midpoints the oil is roughly 60:16:16, with ALA about 3.8 times linoleic acid and 3.8 times oleic acid. The ratios are a consistency check, not a provenance test: they catch an oil diluted with sunflower or a high-oleic carrier, and they do not separate perilla from flaxseed, whose profile is close.

The rest of the oil is the saturated fraction and the unsaponifiable matter. Palmitic and stearic acid account for most of the saturated part, and the sterols and tocopherols sit in the unsaponifiable fraction. A GC report that lists only ALA has not described the oil; the full table of peaks is what makes the profile a fingerprint.

What a deviation in each part of the profile suggests
Part of the profileCatalog rangeA deviation suggests
ALA (C18:3 n-3)55.0–65.0%Dilution with a low-ALA oil
Linoleic acid (C18:2 n-6)12.0–20.0%A soybean or sunflower addition
Oleic acid (C18:1 n-9)12.0–20.0%A high-oleic carrier
Saturated fractionBalance of the profileA partly hydrogenated or fractionated oil
Sterols and tocopherolsReported separatelyA stripped, refined or blended oil

What XRD can and cannot do here

XRD reads a crystal lattice, and perilla seed oil is a liquid at room temperature, so there is no lattice to read. The method belongs to the solid ingredients in the catalog, not to the oils. A certificate that offers “XRD conforms” for an oil has either tested the wrong material or used the word loosely.

What applies instead is the chromatographic set: GC for the fatty acids, HPLC for the tocopherols, and GC after saponification for the sterols. FTIR can screen a sample against a reference spectrum, but it is a similarity check, not a proof of botanical source. If a solid deposit appears in a drum, XRD can identify the wax or the stearin, and that is a quality observation rather than an identity result.

How a substitution shows up

The obvious diluent is another ALA-rich oil, and flaxseed is the one that fits the profile most closely. A blend of perilla and flax can sit inside every catalog range, so the fatty-acid gate alone will not catch it. The commercial risk splits in two: dilution with a low-ALA oil is easy to see on the profile, and substitution with another ALA oil is not.

Common perilla seed oil substitutions and the signals
AdulterantEffect on the profileSignalTest
Flaxseed oilALA and linoleic stay close; saturates and minor fractions shiftSterol and tocopherol patternGC sterols, HPLC tocopherols, isotope work
Soybean oilLinoleic up, ALA downFull profileGC-FID
Rapeseed oilOleic up, ALA downFull profileGC-FID
Sunflower or high-oleic carrierALA down; oleic or linoleic upFull profileGC-FID
ALA concentrateALA high, minor fraction strippedSterols and tocopherols lowGC sterols, HPLC tocopherols
Old or oxidised oilProfile little changedPV and p-AV highPeroxide and anisidine values

Colour and odour are weak signals. A golden oil with a green note can be fresh perilla, and a refined blend can be made to look similar. The stronger signals are the full profile, the minor fractions and the oxidation values, read together.

What the identity clause should say

  • “Perilla frutescens seed oil, cold-pressed from the seed; country of origin declared.”
  • “ALA 55.0–65.0% of total fatty acids by GC; linoleic and oleic 12.0–20.0% each.”
  • “Full fatty-acid profile reported, with the chromatogram.”
  • “Sterol and tocopherol profiles reported on request.”
  • “FFA ≤0.50% as oleic acid; PV ≤5.0 meq O2/kg; moisture ≤0.1%.”
  • “No added oil, antioxidant or diluent other than those declared.”
  • “Lot code on the certificate, the pack and the retained sample.”

This catalog does not carry a CAS number for the oil. Perilla oil is a named oil rather than a single molecule, so the identity rests on the botanical source and the profile, and the specification should say so.

Five questions to put in writing

  1. Which species and which part is the oil pressed from, and where was the seed grown?
  2. Please send the full GC chromatogram with the integration, not just the ALA total.
  3. What are the sterol and tocopherol results for this lot?
  4. Is the oil cold-pressed or refined, and is any antioxidant added?
  5. If we disagree on a result, how is a referee test on the retained sample arranged?

Those five answers make an identity file; one ALA figure does not. The catalog specification is on the perilla seed oil product page. Where each figure appears on the lot certificate is set out on the COA page, the pressing choice on the grade page, the GC and HPLC work on the methods index, and the release file on the quality page. The other ALA oil that can be confused with this one is on the flaxseed oil powder page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation