04 MOQ & ordering

Nervonic acid: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Nervonic Acid

On this page
  1. Why the smallest order is a kilogram
  2. Pack sizes and forms
  3. From order to dispatch
  4. What has to be in a quotation
  5. Qualification needs a lot code
  6. What to settle before the first order

Nervonic acid ships from a 1 kg minimum: one foil pouch, and a 25 kg fiber drum for bulk. Standard packs dispatch in 1–7 days. A firm quotation needs the buyer to state the C24:1 minimum and its basis, the physical form, the pack, the destination, the documents required and what the material will be used for, because a 90% powder and an oil blend are quoted and specified as separate items.

In one line

A kilogram is the minimum because a waxy speciality is bought as a traceable pack, not as a scoop from a drum.

Why the smallest order is a kilogram

One kilogram covers three jobs at once: a bench trial, the retained sample that the trial is judged against, and an independent GC run. It is also light enough to travel as a parcel, which matters when a formulator wants material before the production slot is booked. The pouch carries a lot code, and the certificate is written against that code, so a trial result points back to a real lot.

Splitting a kilo down is possible, but it is a repack. The material leaves its original pack, takes a new lot identity and gains a fresh headspace. With a waxy solid the cut surface is also a new oxidation surface, and a small container often has to be warmed before the material will come out. Traceability is what gets lost, and it is worth more than the few hundred grams that were saved.

The 25 kg drum is the production pack. It cuts handling per kilogram, but it commits inventory to a single lot and holds it through the retest period. That is the buyer's stock decision to make.

Pack sizes and forms

Standard nervonic acid packs
PackNet weightWhen it is usedHandling note
Foil pouch1 kgFirst trial, sample retention, small batchFoil is the light and moisture barrier; close it properly after opening
Fiber drum25 kgProduction runsThe liner does the sealing; record the opening date
Oil blendOn requestSoftgel or liquid fillCarrier and ratio go on the specification and the label

The catalog form is the 80 mesh powder; an oil blend is a separate specification rather than another way of packing the same powder. Mesh matters more here than it does for a free-flowing salt. A finer grind sinters faster in a warm store, and a coarser one may not blend evenly into a capsule fill.

From order to dispatch

Standard packs are quoted at 1–7 days from confirmation. The clock starts at the order and stops at dispatch; the transit, the customs entry and the customer's release all sit outside that window. A blend, a different mesh or a special pack needs its own lead time, quoted as a separate line.

Ask for the dispatch date, and read the lead time as a range. A drum moves on a pallet, a pouch moves as a parcel, and the trade term says who arranges freight and who clears entry. In summer, ask about the route too: a container that stands at 45 °C will deliver a caked drum with a perfect assay.

What has to be in a quotation

Six details make a quotation firm enough to compare:

  1. Material. Nervonic acid, CAS 506-37-6, free acid, with the seed oil it was fractionated from named.
  2. Assay and basis. The C24:1 minimum, the GC method, how the peaks were calibrated and whether the ester factor was applied.
  3. Form. 80 mesh powder or an oil blend, with the carrier and the ratio if blended.
  4. Volume and pack. A single 1 kg pouch, a single 25 kg drum, or a non-standard pack agreed in writing.
  5. Destination and trade term. The country, the port or delivery address, and the Incoterm.
  6. Documents and use. COA, specification, SDS, any market statement, and what the material will go into.

Three different readings of “90%” can sit behind one quotation, so the basis and the form are not optional detail. Commercial terms are not published on this page; they belong on the quotation.

Qualification needs a lot code

The 1 kg pouch is the qualification lot. Run GC identity, the C24:1 assay, acid value, loss on drying, peroxide value and melting point, then keep part of the same pouch as the retained sample. Sample, certificate and quotation should carry one lot code. A sample with no lot behind it cannot support a scale-up decision.

If a few grams are needed for bench work, raise it before the order. A split from a drum is a repack with its own record, and it should be labelled as one. Never assume the bench sample and the production drum are the same lot, and never copy a bench result onto a drum certificate.

What to settle before the first order

The trade term, the pack, the lead time and the documents sit on the quotation. The quality side belongs next to it: which specification revision applies, a certificate with each lot, a retained sample, a retest period and the change-notification route. Settle that before the first production order rather than after the first argument.

Replacement and return are governed by the quotation and the quality agreement. A disputed lot is settled on the retained jar by a joint re-test, never by a photograph. Agree in advance who commissions the referee test, and which laboratory both sides accept.

Catalog data is published on the nervonic acid product page; the release lines are on the COA page; the market files sit on the compliance page; a definition of the term appears in the glossary; freight and paperwork are covered on the logistics page; the release file itself is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation