Nervonic acid grades: assay, form and the source record
Nervonic acid is bought as a free acid with a C24:1 minimum, and the grade question has three parts: how high that minimum is, whether the material is a powder or an oil blend, and which seed oil it was fractionated from. The catalog minimum is ≥90.0% by GC in an 80 mesh powder, packed in a 1 kg pouch or a 25 kg drum. A higher minimum, or an oil format, is a different specification rather than another pack.
The grade is set by the C24:1 minimum, the physical form and the source record, and changing any one of them makes it a new specification rather than an upgrade.
Why a fractionated acid comes in grades
Nervonic acid is a minor component of the oils it comes from. A seed oil carries a few percent at most, so a 90% material is the product of an enrichment step, usually crystallisation, urea adduction or a combination of the two. That step is a separation, not a synthesis: it concentrates C24:1 and leaves the saturated C24:0 and the shorter C22:1 behind in proportion to how hard the cut is run.
Two consequences follow. The assay minimum is a commercial choice about yield, because pushing the cut higher loses material, and the residue is not inert: C24:0 is a harder wax with a higher melting point, and C22:1 is a different monounsaturated acid. A buyer who compares only the headline percentage is comparing the yield of a cut, not the material.
The physical form is the second axis. The free acid melts at 42–44 °C, so a powder only exists below that temperature; above it the material is a liquid, and on cooling it sets into a waxy solid that may not return to the same mesh. An oil blend avoids that cycle by keeping the acid dissolved in a carrier, but it carries a much lower C24:1 per gram.
The grades side by side
| Property | 90% powder (catalog) | Higher-assay fraction (by agreement) | Oil blend (on request) |
|---|---|---|---|
| C24:1 minimum | ≥90.0% by GC | A higher minimum, agreed per order | Stated on the blend specification |
| Form at 25 °C | Waxy powder, 80 mesh | Waxy powder or flake | Liquid oil |
| Melting behaviour | 42–44 °C | Narrower range, closer to the pure acid | No melting point of its own |
| Carrier | None | None | A declared carrier oil |
| C24:1 per gram | About 900 mg | Higher, in proportion to the assay | Set by the blend ratio |
| Label name | Nervonic acid | Nervonic acid | The blend and its carrier both named |
| What changes on switching | Reference grade | Fill weight, assay line, yield | Fill weight, carrier, allergen statement |
The last row decides most projects. A higher assay changes the mass that delivers a given amount of C24:1, and an oil blend changes both the mass and the ingredient list. Neither is a drop-in for the powder.
The powder, the melt and the warehouse
At 25 °C the catalog grade is a white to off-white waxy powder, ≥95% through 80 mesh, with loss on drying ≤1.0%. It flows like a coarse flour when it is cold and dry, and it stops flowing when it is warm. The melting point is 42–44 °C, which is inside the range of a closed vehicle in summer and close to the set point of a warm warehouse.
A pack that has softened and re-solidified can still be in specification on assay and out of specification on particle size: the powder has sintered into lumps, the 80 mesh figure no longer describes the pack, and a capsule filler will struggle. That is a physical failure with a chemical certificate still attached, and it is the usual reason a lot is rejected in a hot climate.
The oil blend removes the melting risk and adds another: the carrier oil has its own peroxide value, shelf life and label entry. The blend is also far more dilute, so the pack size per unit of C24:1 rises. For a softgel that is acceptable; for a capsule that must stay small it usually is not.
Dose arithmetic and the fill
A 500 mg fill of the 90% powder carries about 450 mg of C24:1. The same fill of a higher-assay fraction carries more in proportion to its assay. A 10% oil blend needs 4,500 mg to deliver the same 450 mg, several large softgels rather than one capsule. None of this is a dose recommendation; it is the arithmetic that keeps the label, the fill weight and the certificate in agreement.
Two conversions sit behind those numbers. The assay may be reported on the methyl ester rather than on the free acid, which moves a 90.0% figure to about 86.7% acid, and the blend ratio may be quoted on the oil rather than on the finished blend. Ask for the basis and the ratio in writing before the fill weight is fixed, because both change the mass on the label.
A tablet is possible with the waxy powder, but the compression step can squeeze material to the surface and leave a patchy, waxy face. If the project needs a granule or a specific flow, that is a particle-size change and it belongs in the specification, not in the purchase order note.
What to write into the specification
- “Nervonic acid (cis-15-tetracosenoic acid), CAS 506-37-6, C24H46O2, free acid.”
- “C24:1 ≥90.0% by GC-FID, with the ester factor and the calibration stated.”
- “C24:0 and C22:1 reported on the same run; the agreed limits named.”
- “Acid value reported; consistent with the free acid at the declared assay.”
- “Melting point 42–44 °C; loss on drying ≤1.0%; ≥95% through 80 mesh.”
- “Source seed oil named; allergen and origin statements attached.”
- “Pack, storage condition and retest period stated on the specification.”
When the other grade is the wrong choice
A higher assay is the wrong purchase when the label does not need it. The extra percentage buys fill-weight room, and when the capsule is already comfortable there is little to gain. It is also the wrong purchase when the specification has not been rewritten, because an old assay line on a new grade is a non-conformance waiting at the goods-in gate.
An oil blend is the wrong choice for a dry capsule, for a label that must list a single ingredient, and for any market where the carrier brings its own regulatory or allergen question. The powder is the wrong choice for a softgel line, for a formula that must stay liquid at room temperature, and for a warehouse that cannot hold the pack below 40 °C.
The published catalog data sits on the nervonic acid product page; the release lines are on the COA page; the acid-by-acid comparison is on the nervonic versus oleic page; a different way of carrying an oil is shown on the flaxseed oil powder page; the shelf-life rules are on the stability page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation