Hemp seed oil vs flaxseed oil: two ALA oils, two profiles
Hemp seed oil and flaxseed oil are both cold-pressed seed oils sold for their alpha-linolenic acid (ALA), but their profiles run in opposite directions. Hemp is linoleic-first — linoleic acid 50.0–60.0%, ALA 15.0–25.0%, with 1–4% gamma-linolenic acid (GLA) — while flaxseed is ALA-first at 45.0–65.0%, with linoleic at 12.0–20.0% and no GLA at that level. A gram of hemp oil therefore delivers 150–250 mg of ALA, against 450–650 mg from a gram of flaxseed oil.
Hemp seed oil is linoleic-first with 15–25% ALA and a little GLA; flaxseed oil is ALA-first with 45–65% ALA, so a gram of each delivers a different dose and a different oxidation risk.
The two profiles on one page
The catalog windows compare directly; the table uses the release limits from each specification, not a batch result.
| Parameter | Hemp seed oil | Flaxseed oil |
|---|---|---|
| Botanical source | Cannabis sativa L. seed | Linum usitatissimum L. seed |
| Linoleic acid (C18:2 n-6) | 50.0–60.0% | 12.0–20.0% |
| Alpha-linolenic acid (C18:3 n-3) | 15.0–25.0% | 45.0–65.0% |
| Oleic acid (C18:1 n-9) | 10.0–20.0% | 12.0–20.0% |
| Gamma-linolenic acid (C18:3 n-6) | About 1–4%; reported in the profile | Not a declared component |
| ALA per gram of oil | 150–250 mg | 450–650 mg |
| Dominant note in the oil | Linoleic, with a green, nutty character | ALA, with a drying-oil character |
The ratio runs in opposite directions
Hemp seed oil sits at roughly 2.0–4.0 parts linoleic acid to one part ALA, with a typical cold-pressed lot near 3:1. Flaxseed oil sits the other way round: its ALA-to-linoleic ratio is roughly 2.3–5.4 to one, and the linoleic-to-ALA ratio is well below one. The two ratios are the quickest way to tell the oils apart on a certificate, and the GLA peak confirms the hemp side.
GLA is present in hemp seed oil at roughly 1–4%, which is 10–40 mg per gram. Flaxseed oil does not carry a declared GLA fraction, so a resolved C18:3 n-6 peak next to the ALA peak is a hemp signal. The peak is small, and a method that merges the two C18:3 isomers will hide it; the chromatogram has to show the pair separated before either figure means anything.
A blend defeats the ratio: sunflower or safflower oil can lift linoleic acid, and a little flaxseed oil can lift ALA, so a mixture can sit inside the hemp windows. The sterol, tocopherol and cannabinoid checks are harder for a blend to satisfy; the ratio is a filter, not a proof.
What a gram delivers
The dose comparison follows from the ALA window. The table uses the catalog floors and ceilings, not a batch result; the release figure for the lot is what belongs on a label.
| Oil and ALA level | ALA per 1 g | ALA per 500 mg | Oil needed for 2 g ALA |
|---|---|---|---|
| Hemp seed oil, ALA 15.0% | 150 mg | 75 mg | 13.3 g |
| Hemp seed oil, ALA 25.0% | 250 mg | 125 mg | 8.0 g |
| Flaxseed oil, ALA 45.0% | 450 mg | 225 mg | 4.4 g |
| Flaxseed oil, ALA 65.0% | 650 mg | 325 mg | 3.1 g |
The 2 g column is arithmetic against the EU alpha-linolenic acid claim intake, not a recommended dose. A 500 mg softgel of hemp oil carries 75–125 mg of ALA, against 225–325 mg for flaxseed oil. Delivering 2 g a day from hemp takes 16–27 capsules; from flaxseed, 6–9. The capsule count is what the formulator must size.
The GLA that flaxseed oil does not have
Hemp seed oil carries GLA, an omega-6 acid with three double bonds, at roughly 1–4%: 10–40 mg per gram, or 5–20 mg in a 500 mg capsule. Flaxseed oil has no comparable GLA fraction, so a formula that wants both ALA and GLA from one oil cannot get them from flaxseed alone.
The GLA figure also has a labelling consequence. If the oil is sold on its GLA content, the specification needs a range, a method and a basis, and the label declaration has to be calculated from the release result. A GLA figure quoted without the method that separates it from ALA is not a specification. This page makes no health claim for GLA or for either oil; the composition is the subject.
Oxidation: which oil has the shorter fuse
Flaxseed oil is the more unsaturated: 45.0–65.0% of its fatty acids are ALA, a triene, against 15.0–25.0% in hemp. On the same pack and condition, flaxseed oil generally has the shorter induction period, and its peroxide and anisidine values can move while hemp is still inside its limits. That is a property of the profile, not a defect.
Hemp has a different weakness. Its chlorophyll absorbs light and passes the energy to oxygen, so a green oil in clear glass oxidises faster than the same oil in amber glass. Flaxseed oil is also light-sensitive, but the hemp colour adds a photochemical route that a pale refined oil does not have. Both oils need an oxygen barrier, a small headspace and a cool, dark store; the pack is chosen for the oil, not the shelf.
In a blend, the least stable oil governs. A small share of flaxseed oil can pull a mostly saturated blend down, and a small share of hemp oil can add a chlorophyll route to a blend that was otherwise pale. Measure the blend at its own storage condition rather than averaging the components.
The label and the ingredient list
The ingredient list names the species, not the family. “Hemp seed oil” and “flaxseed oil” are different declarations, and a blend must list both. Neither oil is on the EU Annex II allergen list or the US major-allergen list, so the oil itself does not trigger a declaration; a powder on a carrier still has to be assessed for the carrier's source.
The nutrition declaration states ALA per serving from the release result. In the EU, the authorised alpha-linolenic acid claim requires 2 g a day, which is 8–13.3 g of hemp oil at the catalog windows but only 3–4.4 g of flaxseed oil; below that intake the claim cannot be paraphrased. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and neither oil supports a disease claim.
When to choose which
Choose hemp seed oil when the formula wants a linoleic-first oil, when the natural GLA fraction is part of the composition story, or when the flavour and the green colour fit the product. It is the shorter route to a high linoleic figure and the only one that carries GLA at a declared level.
Choose flaxseed oil when the dose per gram is the constraint: a capsule that has to carry a meaningful ALA amount at a small fill weight is easier to build on the flaxseed profile. Choose the refined grade of either oil for a pale, mild oil, and a powder on a carrier for a dry format.
The catalog specifications are on the hemp seed oil product page and the flaxseed oil product page. The grade question for hemp is on the hemp grades page; the analytical methods are indexed under methods; the release workflow is on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation