01 COA & batch testing

What a hemp seed oil COA actually reports

Technical document 01 · Reviewed 2026-11-20 · Hemp Seed Oil

On this page
  1. The certificate as a lot report
  2. The GC basis: total fatty acids, oil mass and the C18:3 pair
  3. Release limit versus batch result
  4. What moves between lots
  5. When to order an outside test
  6. What to compare between suppliers

A certificate for a hemp seed oil lot has to answer two questions on one page: is the oil Cannabis sativa seed oil, and is it still fresh? The first is settled by the GC fatty-acid profile — linoleic acid, alpha-linolenic acid (ALA), oleic acid and the small gamma-linolenic acid (GLA) peak — and the second by free fatty acid, peroxide value and moisture on the same lot. The limits below are the catalog specification; the batch COA is the record for the bottle or drum in front of you.

In one line

The hemp certificate is read as a profile, not a single marker: linoleic and ALA by GC, the GLA peak that separates hemp from flax, and free fatty acid and peroxide value on the same lot.

The certificate as a lot report

Hemp seed oil is not specified by one marker. The linoleic window is 50.0–60.0% and the ALA window 15.0–25.0%, so two conforming lots can differ widely. A certificate that prints only ALA has described half the oil; the full profile, including the GLA peak, is what places the lot.

Identification asks whether the whole profile is consistent with cold-pressed seed oil of Cannabis sativa L.; the linoleic and ALA rows ask how much of each acid the lot carries.

Identity, composition and condition · cold-pressed hemp seed oil · CAS 89958-21-4
ParameterMethodRelease limit
AppearanceVisualClear to slightly hazy oil, greenish-yellow to golden
IdentificationGC of fatty acid methyl esters against a reference profileProfile conforms
Linoleic acid (C18:2 n-6)GC-FAME50.0–60.0%
Alpha-linolenic acid (C18:3 n-3)GC-FAME15.0–25.0%
Oleic acid (C18:1 n-9)GC-FAME10.0–20.0%
Free fatty acid (as oleic)Titration≤0.50%
Peroxide valueIodometric titration≤5.0 meq O₂/kg
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

GLA belongs in the chromatogram even though it is not a release limit: cold-pressed hemp oil normally carries 1–4%, and its presence is evidence that the oil came from hemp seed rather than a linoleic-rich blend.

The GC basis: total fatty acids, oil mass and the C18:3 pair

Fatty-acid results come from transesterification to methyl esters and capillary gas chromatography with flame-ionisation detection. The percentage can be reported as area per cent or as weight per cent after response-factor correction; the two do not agree exactly, and the certificate should name the basis, the column and the standard. The chromatogram should travel with the result when identity is disputed.

The C18:3 position carries more weight in hemp than in most seed oils. Alpha-linolenic acid (C18:3 n-3) and gamma-linolenic acid (C18:3 n-6) share a carbon count and a molecular mass, and a short or weakly polar column can merge them into one peak. A method that does not resolve both cannot prove the ALA figure or the GLA presence. The report should show the pair separated, alongside palmitic and stearic acids.

The oil basis is a second conversion. A 55.0% linoleic result on total fatty acids is about 520 mg per gram of oil once the glycerol fraction is allowed for, because a triglyceride is roughly 95% fatty acids by mass. A label or blend calculation that reads the percentage as per gram of oil overstates the fatty acid delivered, so the certificate should state whether the figure is on total fatty acids or on oil mass.

Release limit versus batch result

The release limit is the acceptance boundary and the batch result is what the laboratory measured; both belong on the page in separate columns, with the method beside them.

Free fatty acid reflects hydrolysis, which needs water; peroxide value reflects the first stage of oxidation, which needs oxygen and is accelerated by light and heat. An oil can pass both at release and still arrive stale if the bottle was warm and half empty.

What the result column should contain
ParameterRelease limitResult column
Free fatty acid≤0.50% as oleicA measured percentage, with the titration method
Peroxide value≤5.0 meq O₂/kgA measured figure in the stated units
p-Anisidine valueNot fixed in the catalog; agree at orderA measured figure against the agreed limit
Moisture≤0.1%A measured percentage by Karl Fischer
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kgA figure per element, not a single total
MicrobiologyCounts and absence testsThe count and the absence statement for the lot

The anisidine value measures secondary aldehydes and can keep rising after the peroxide value has peaked. If the buyer needs a limit, it belongs in the specification for every lot.

What moves between lots

The cultivar, the seed lot, the season and the pressing temperature move linoleic and ALA inside the windows. Refining moves free fatty acid, colour and peroxide value far more than the profile, so a refined oil can report the same ALA as a cold-pressed oil and behave differently in a softgel. Chlorophyll varies with the seed and the press and shows up as colour.

Peroxide value is the most variable line. It depends on the seed condition, the press temperature, the headspace and the time since production. A result close to 5.0 meq O₂/kg leaves little room for a warm warehouse, and the number on arrival can be higher than at release even when the pack was sealed. A trend across lots says more than one result near an edge; the lot code should tie the certificate to the pack and the retained sample.

When to order an outside test

Order an independent test for a new source, a first shipment into a regulated market, a disputed ALA figure, a suspected blend, or an oil that smells stale on arrival. The panel is narrow: GC-FAME with the full profile and chromatogram, sterols and tocopherols when the botanical source is in question, FFA, peroxide and anisidine values, heavy metals and microbiology.

Hemp material needs one more screen. A cannabinoid panel for delta-9-THC and CBD shows whether the lot is seed oil or a whole-plant extract blended into oil, and it supports the destination file where a THC limit applies. Ask for the limit of quantification with the result; a “not detected” line without a limit describes the method, not the oil. Keep the chain of custody intact, so the sample tested is the sample retained.

What to compare between suppliers

Put six lines side by side: species and plant part; the full fatty-acid profile with its basis; the GLA and cannabinoid results; free fatty acid, peroxide and anisidine values; the heavy-metal and microbiology results; and pack size with lot traceability. Two certificates that agree on ALA but disagree on linoleic, oleic or GLA are not describing the same oil.

The catalog specification sits on the hemp seed oil product page. The tests that separate hemp seed oil from flaxseed oil and other oils that can imitate its profile are on the identity page; the process grades are on the grades page; the analytical methods are indexed under analytical methods; and lot release is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation