05 Compliance

The regulatory file for hemp seed oil

Technical document 05 · Reviewed 2026-11-20 · Hemp Seed Oil

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. United Kingdom
  5. Contaminants and limits
  6. Claims and the label
  7. Documents for the file
  8. Checklist before the first order

Hemp seed oil pressed from the seed is an ordinary food oil with a documented history of use, so the question is not whether the oil is permitted but how the finished product is positioned in the destination market. One material-specific point separates it from most seed oils: the delta-9-THC figure, which is limited in several markets even when the oil comes from clean seed. The buyer's regulatory team confirms the route; this page lists the documents and limits for the file.

In one line

Hemp seed oil is an ordinary food oil, but the file has to show the seed source, the delta-9-THC result and the destination route behind the label.

What the file contains

The file holds four things at once: the specification version, the lot certificate, the limits and label rules for the finished product, and the record of how source, process and pack changes are handled. The COA reports the lot, the specification states the grade and release limits, and the SDS covers handling; none of them settles the destination route.

The file also needs the statements a buyer's quality team asks for: allergen, GMO, country of origin, residual solvent, trans fat and, where relevant, organic certification. Hemp adds a cannabinoid statement with the delta-9-THC and CBD results, the method and the limit of quantification. Name any gap before the order moves, and keep a versioned document list at the front.

European Union

Oil produced by simple pressing of hemp seed has a history of consumption in the EU and is not treated as a novel food in the Novel Food Catalogue, as of this review. A cannabinoid-rich extract is a different material and does not inherit that position. Labelling follows Regulation (EU) No 1169/2011, and a food supplement follows Directive 2002/46/EC, which requires a nutrition declaration; the ALA amount per serving is declared on that basis.

Commission Regulation (EU) 2022/1393 sets a maximum of 7.5 mg/kg for delta-9-THC equivalents in hemp seed oil, as of this review; the buyer's team checks the current text and the category that applies. Contaminants fall under Regulation (EU) 2023/915, and the applicable maximum depends on the food category and the daily dose. “Cold-pressed” is a process statement, supported by the press record rather than by a certificate line.

United States

In the United States, hemp seed oil is sold as a conventional food or a dietary supplement ingredient. The 2018 Farm Bill removed hemp from the Controlled Substances Act, and in December 2018 the FDA completed its review of three GRAS notices — hulled hemp seed (GRN 765), hemp seed protein powder (GRN 771) and hemp seed oil (GRN 778) — raising no questions on their use in human food. That position covers the seed-derived oil, not a product with added CBD.

The finished product is the brand's responsibility: current good manufacturing practice under 21 CFR 111, the Supplement Facts panel for a supplement, and the labelling rules in 21 CFR 101 for a food. Structure/function statements need substantiation and the DSHEA disclaimer, and no disease claim is open. State requirements, such as California's Proposition 65, sit on top of the federal position.

United Kingdom

The UK is not one file. Great Britain uses its own labelling and supplement rules and a GB novel-food register; Northern Ireland sits under the EU framework, including the EU THC limit for hemp seed oil. The delivery address decides which applies, and the buyer's team records that decision with the order. A THC limit that applies in one part of the UK may not be the same in the other.

Contaminants and limits

The panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a supplement file; the current destination text and the daily dose decide the final limit.

Limits to confirm for the finished hemp seed oil product
ParameterTypical referenceWhat the file should show
Lead (Pb)3.0 mg/kg in the supplementLot result, method, limit and the finished-product calculation
Cadmium (Cd)1.0 mg/kg in the supplementLot result and any category exception that applies
Mercury (Hg)0.10 mg/kg in the supplementLot result and method
Arsenic (As)Customer or market limitThe agreed limit and the method, stated on the certificate
Delta-9-THC7.5 mg/kg in hemp seed oil (EU, as of this review)Result as THC equivalents, method and limit of quantification
Free fatty acid≤0.50% as oleic (specification)Measured result and titration method
Peroxide value≤5.0 meq O₂/kg (specification)Measured result and the units

The last two lines are specifications rather than regulatory maxima, but they belong in the same review: an oil that meets the metal and THC panel while carrying a stale note is a quality failure even when it is legally compliant.

Claims and the label

In the EU, as of this review, a health claim may be used only if it is authorised, and the register entry for alpha-linolenic acid sets the exact wording and a minimum intake of 2 g per day. Hemp oil at 15.0–25.0% ALA means 8–13.3 g of oil a day to reach that intake, which is a large number of 1 g capsules; a product that cannot deliver it cannot carry the claim. Nutrition claims for omega-3 have their own thresholds per 100 g and per 100 kcal.

In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and it must not describe a disease. In both markets no disease-related claim is made, and this site publishes the specification rather than a claim. The label must match the form ordered: an unrefined oil cannot be labelled refined, and a powder must declare its carrier. A CBD claim is outside this file.

Documents for the file

The file needs the COA with the GC profile and its basis, free fatty acid, peroxide value, moisture, the metal panel, the microbiology count and the cannabinoid results; the specification with the grade, the fatty-acid windows and the pack; the TDS and SDS; the allergen, GMO, origin and residual-solvent statements; and the trans fat figure where the market asks for it. For the powder, add the carrier identity and the oil load.

The hemp seed oil product page carries the catalog specification, and the identity page sets out the analytical evidence behind it, with the tests indexed under methods. The EU, US and UK notes collect the framework references, and the quality page describes the release file.

Checklist before the first order

  • Specification version, grade, CAS number and fatty-acid windows are named.
  • The COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are present.
  • The cannabinoid panel names the method, the result and the limit of quantification.
  • Each result is converted to the finished-product dose, including the THC calculation.
  • Oxidation limits and the anisidine decision are in the specification, not only in the email.
  • The label, the nutrition declaration and the claim have been reviewed for the destination.
  • The quotation, the specification and the certificate carry the same version.

A file built this way answers the questions a distributor or an authority reviewer will ask, and it keeps the grade, the pack and the label tied to the lot actually shipped.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation