Algal DHA oil vs powder: the carrier, the dose and the label
Algal DHA oil and algal DHA powder carry the same fatty acid in different physical packages. The oil is a triglyceride oil at 35.0–45.0% DHA with no carrier; the standard powder is that oil microencapsulated on a modified-starch wall at ≥10.0% DHA. A 200 mg DHA declaration therefore needs 0.44–0.57 g of oil or 2.0 g of the 10% powder, and the ingredient list has to name the carrier in the powder.
The oil is the neat triglyceride and the powder is that oil carried on a starch wall, so the same DHA declaration needs different weights, different packs and a different ingredient list.
What carries the DHA
In the oil, nothing carries the DHA but the oil itself. The triglyceride is the delivery form, the DHA is esterified to glycerol, and the only other things in the bottle should be an antioxidant if one has been declared. “Carrier” in this product means what it does not have: there is no starch, no maltodextrin and no dilution oil in the catalog grade.
In the powder, the carrier is the wall. The oil is emulsified into a starch matrix and spray-dried, so the particle is a shell of modified starch around droplets of oil. At 10% DHA from a 35–45% oil, the oil load is roughly 22–29% by mass and the rest is the wall and a little moisture. That wall is why the powder flows, disperses and can go into a stick pack, and it is also why the powder's ingredient list is longer than the oil's.
The word is used for a third thing as well: a carrier oil added to dilute a high-DHA oil to a lower figure. That is a formulated blend, not the powder's starch wall and not the neat oil, and it must be declared. When a quotation says “carrier”, ask which of the three it means.
The dose arithmetic
The percentage converts a label declaration into a weigh-up. The table uses the catalog limits for the oil and the catalog minimum for the powder, before any overage. The oil's two columns are the ends of its specification range, not two products.
| DHA declared | Oil at 35.0% DHA | Oil at 45.0% DHA | Powder at 10.0% DHA |
|---|---|---|---|
| 100 mg | 0.29 g | 0.22 g | 1.0 g |
| 200 mg | 0.57 g | 0.44 g | 2.0 g |
| 250 mg | 0.71 g | 0.56 g | 2.5 g |
| 500 mg | 1.43 g | 1.11 g | 5.0 g |
The powder needs 3.5–4.5 times the oil's weight, depending on the oil's DHA result; at 40% DHA the factor is four. A 500 mg softgel filled with oil carries 175–225 mg of DHA; a 500 mg capsule filled with the 10% powder carries about 50 mg. A 200 mg declaration from the powder is therefore four capsules, or a larger capsule, or a different form — which is a design decision, not a quality difference between the two products.
What the label has to say
The oil's ingredient list is short: algal oil, with the source named. The powder's list adds the carrier, and modified starch belongs there because it is a substantial part of the particle, not a processing aid. A label that names only “algal DHA” on a powder has hidden the wall that makes the powder a powder.
Both forms declare DHA per serving, and the figure has to match the form and the lot. In the EU, a supplement must state the amount of the substance with a nutritional effect, so the DHA figure belongs on the label as well as on the COA; in the US it belongs in the Supplement Facts panel. The source statement follows the destination rules, and the fish-free or vegan position depends on the line and on every carrier, not only on the algal oil.
A specification figure such as “40% DHA” is not a label claim. It is the concentration the fill calculation uses, and the label declares the mass of DHA per serving that the finished product delivers. The two numbers are related by the arithmetic above, and they are not interchangeable.
What each form does in a dosage form
The oil suits a softgel, an oil blend, a liquid-filled capsule or an emulsion. It is insoluble in water, so a clear drink needs an emulsifier and a process, and a powder stick cannot take it without a carrier. A softgel is the compact option: one fill carries more DHA than any practical amount of the 10% powder, which is why a high-dose omega-3 product is usually an oil project.
The powder suits a two-piece capsule, a tablet, a stick pack, a shaker, a gummy or a functional beverage. It disperses in water rather than dissolving — the oil is inside the wall, so the drink is a suspension — and it brings the carrier's mouthfeel and the wall's moisture sensitivity with it. A gummy or a beverage adds heat and water, so the powder's matrix trial is part of the development, not a formality.
When to choose which
Choose the oil when the dose is high, the package is a softgel or an oil blend, and a short ingredient list matters. Choose the powder when the package is dry, when a stick pack or a tablet is the target, or when the formula cannot take an oil. Choose neither by habit: the two are separate products with separate certificates, and a switch changes the fill weight, the label and often the market file.
If the brief says only “algal DHA”, it has not chosen. The oil at 40% and the powder at 10% both answer to that phrase, and they deliver different amounts of DHA per gram, carry different carriers and need different packs.
What to rewrite when you switch
A switch is a change control, not a line edit. The specification has to name the form and the DHA basis, the carrier or its absence, the oxidation limits, the moisture limit, the pack and the fill weight. On the oil, moisture is ≤0.1% and the carrier line says none; on the powder, moisture is ≤5.0%, the carrier is modified starch and the particle size is ≥95% through 40 mesh. The peroxide limit can be the same number on both, but the powder also carries a p-anisidine limit because the wall does not stop oxidation.
The algal DHA oil page carries the oil specification; the algal DHA powder page carries the powder specification; the oil grades page sets out the DHA range; the oil COA page shows the release tests; the methods section explains the GC work behind both.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation