Which trypsin grade: activity, chymotrypsin content and form
A trypsin grade is fixed by three things at once: the activity in USP units per milligram, the chymotrypsin activity that comes with it, and the physical form of the powder. The catalog grade here is a ≥250 USP U/mg, 40 mesh white powder that dissolves freely in water. A higher-activity preparation, a diluted or granulated powder, or a deliberate blend with chymotrypsin is a different purchase with its own specification and its own label.
The grade of a trypsin powder is set by its activity per milligram, its chymotrypsin content and its physical form, not by the word trypsin on the label.
Three decisions behind one product name
Trypsin is extracted from pancreas, where it sits beside chymotrypsin and a large set of other proteins. The purification train decides how much of the extract becomes active trypsin and how much chymotrypsin travels with it, and the drying and blending steps decide the activity per gram of the powder that is finally packed. “Trypsin” names the enzyme; it does not name the grade.
Activity and purity are separate axes. A powder can be strong because it is pure, or strong because it has been concentrated and lightly diluted, and the two behave differently in a blend. The chymotrypsin ratio is a third axis that a single activity figure hides, and it is the one that matters when the specification is meant to describe a purified enzyme rather than a pancreas fraction.
What changes between grades
| Grade | Activity | Chymotrypsin | What changes for the buyer |
|---|---|---|---|
| Catalog powder | ≥250 USP U/mg, BAEE assay | Ratio limit agreed on the specification | The benchmark: 40 mesh, freely soluble, 1 kg and 25 kg packs |
| Higher-activity powder | Above the catalog figure, same method | Declared separately on the certificate | Smaller mass per unit and a tighter weighing window |
| Diluted powder | Lower per gram, carrier present | Follows the concentrate | A carrier on the label and a larger mass per unit |
| Granulated powder | Measured on the granule | Follows the concentrate | Less dust, slower dissolution, different mesh |
| Trypsin–chymotrypsin blend | Two figures, two units | Deliberate, not a limit | Two enzyme names and two unit systems on the label |
| Recombinant trypsin | Its own unit and method | Absent by construction | A fermentation source and a different file |
Only the first row is the catalog grade on this site. The others are separate purchases, and each has to be described by its own specification rather than as “trypsin” with a bigger or smaller number. A dilution is the clearest case: its activity per gram depends on the ratio of concentrate to carrier, so two powders at 100 USP U/mg can contain different amounts of enzyme if one carrier is heavier than the other.
Powder, dust and solution
The catalog powder is white to off-white and free-flowing, with at least 95% passing 40 mesh. It dissolves freely in water to a clear solution, which is useful for a stick pack or a liquid trial and irrelevant to a capsule, where the powder is weighed dry. Mesh matters in two places: blend uniformity, because a coarse granule segregates less, and dissolution, because a granule takes longer to wet out.
The dust is a respiratory sensitiser, and the safety data sheet sets out the extraction and the protection that go with it. Granulation reduces the dust and improves flow, but it changes the particle-size line and the wetting time, so it is a specification change rather than a packing choice. The powder also picks up moisture, and a caked pouch is a handling problem before it is an assay problem. Keep the pack closed, weigh in a dry room and use the solution fresh, as the stability page sets out.
Units per capsule, not milligrams
The arithmetic is a division. Mass in milligrams equals the target units divided by the activity in units per milligram: 25,000 USP units need 100 mg of a 250 U/mg powder, 50 mg of a 500 U/mg powder, and 5 g of a blend that carries 5,000 U/g. A 500 mg capsule filled with the catalog powder carries about 125,000 units, which is why a formulator has to decide the target before the fill weight.
No intake figure is implied by these numbers; they are the arithmetic that keeps the label, the weigh-up and the certificate in agreement. The blend's own assay decides the capsule mass, not the assay of the concentrate that went into it. With a high-activity powder the dose becomes small enough that homogeneity is the real problem, and a dilution or a granulation may serve the line better than a stronger concentrate.
What to write into the purchase specification
- “Trypsin, species of origin stated, CAS 9002-07-7, EC 3.4.21.4.”
- “Activity ≥250 USP U/mg by the BAEE assay at 253 nm, pH 7.6, 25 °C; basis stated.”
- “Chymotrypsin ratio limit in USP chymotrypsin units, measured on the same lot.”
- “Identification by BAEE activity and infrared spectrum; protein and specific activity where agreed.”
- “Loss on drying ≤5.0%; ≥95% through 40 mesh; heavy metals and microbiology as listed.”
- “Carrier declared; no second enzyme unless named; species and TSE statement attached.”
- “Pack and storage condition stated on the quotation.”
When the catalog grade is the wrong choice
If the line cannot weigh 100 mg accurately, a higher-activity grade makes the problem worse rather than better; a dilution with a declared carrier is the practical answer. If the label names two enzymes, buy the blend and ask for both assays, because a trypsin certificate does not cover the chymotrypsin that was added. If the market or the customer requires a non-animal source, the pancreas extract is not the material, whatever its activity.
If the formula is a liquid that will be held for days, no grade solves the problem: the enzyme digests itself in solution, and the fix belongs to the process. The activity grades are compared with the neutral and alkaline protease ranges, which are separate enzymes with separate units, on the neutral protease and alkaline protease pages. The catalog entry sits on the trypsin product page, the release lines on the COA page, the two-enzyme question on the trypsin versus chymotrypsin page, and the packs on the MOQ page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation