Reading a trypsin COA: activity, unit definition and the chymotrypsin limit
A trypsin certificate reports appearance, identification, activity in USP units per milligram by the BAEE assay, the chymotrypsin figure, loss on drying, heavy metals, microbiology and particle size. The activity row is the only line that describes what the powder does, and it is a rate: it means little unless the substrate, the wavelength, the pH and the basis are printed with it. The limits in the table are the catalog specification; the lot certificate is the evidence for the pack that ships.
A trypsin activity figure is a rate measured against BAEE at 253 nm, so the unit, the wavelength, the pH and the basis have to appear beside the number on the certificate.
What each row has to establish
Each line should answer three questions: what was measured, which method produced the number, and which limit the lot was released against. The activity line needs a fourth, the conditions of the assay. A certificate that prints “250 USP U/mg” under both limit and result has stated the specification twice and the measurement once.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White to off-white powder |
| Identification | BAEE activity assay and infrared spectrum | Conforms to the reference |
| Activity | BAEE substrate, 253 nm, pH 7.6, 25 °C | ≥250 USP U/mg |
| Chymotrypsin | ATEE substrate, 237 nm, pH 7.0, 25 °C | Ratio limit agreed on the specification; result in chymotrypsin units |
| Loss on drying | Gravimetric | ≤5.0% |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
| Particle size | Sieve analysis | ≥95% through 40 mesh |
The chymotrypsin line is what separates a purified enzyme from a pancreas fraction. Both enzymes come out of the same tissue and co-purify, so a trypsin lot always carries some chymotrypsin activity. The limit belongs on the specification as a ratio of activities, and the result belongs on the certificate in chymotrypsin units, measured on the same lot as the trypsin figure.
The unit is a rate, and the method defines it
One USP trypsin unit is the amount of enzyme that raises absorbance at 253 nm by 0.003 per minute in the BAEE assay, at pH 7.6 and 25 °C. That is a rate, not a mass: a purer milligram produces a larger change and carries more units, and nothing in the figure says how much protein the pack contains.
Two conventions sit around that definition and cause most of the confusion on a quotation. A BAEE unit is sometimes defined as a change of 0.001 per minute, one third of the USP unit, so a figure in BAEE units is three times the same figure in USP units. The “1:250” style designation used for some pancreatic powders is neither: it is a digestion designation, and suppliers apply it to different assays. Ask which unit and which method a number is in before comparing two offers.
| Figure | What it measures | What it can be compared with |
|---|---|---|
| USP U/mg | A253 rising 0.003/min with BAEE, pH 7.6, 25 °C | Another result from the same method |
| BAEE U/mg | A253 rising 0.001/min, otherwise similar conditions | Divide by three for the USP figure if the conditions match |
| Casein digestion ratio | A digestion designation, not a rate | Nothing in the BAEE series |
| U/mg protein | Specific activity on the protein fraction | Purity between lots, not strength per gram |
The basis is the other half of the number. Activity per gram of preparation as-is falls as moisture rises, so a result on the dried basis is about five per cent higher at the 5.0% loss-on-drying limit. The certificate should name the basis and the specification should say which one is contractual. Protein and specific activity form a third figure: units per milligram of protein tells a buyer whether the activity comes from a concentrated enzyme or a larger weight of powder, and it is rarely printed unless asked for.
Where the limit ends and the result begins
The limit is the gate; the result is the measurement. A one-sided limit such as ≥250 USP U/mg makes a lot at 251 and a lot at 900 equally compliant, and they are not equally useful: the lot near the floor has less margin for the loss between release and use.
Ask two questions about the result: when the lot was released and what the retest period is, since the activity belongs to the release date; and whether the result was measured on the powder as packed or on a sample dried in the laboratory. For microbiology, the count and the absence statement need the method and the sample size beside them.
Why two lots at 250 U/mg still differ
Pancreas is a biological raw material: species, animal age and season all move the starting mixture. Activation of trypsinogen, the purification train, salt removal and drying then decide how much active enzyme reaches the powder. Autolysis is the specific risk here, because a warm or alkaline hold during processing digests the very enzyme the assay is meant to measure, and the loss shows up as low activity rather than as a visible defect.
Milling and sieving add a change unrelated to the enzyme: the 40 mesh figure is a finishing specification and it moves when the mill or the sieve moves. Colour is a weak signal. White to off-white covers a wide window, and a slightly darker powder can come from a different drying step while the activity is intact.
The chymotrypsin ratio varies most between sources, because it records how far the purification went rather than how the powder was dried; a shift across lots says more about the process than a small change in trypsin activity.
When an outside laboratory is worth it
Order an independent assay for a new source, a first regulated-market shipment, a disputed result, or a blend whose label depends on the activity. The panel should repeat the specification method rather than invent one: BAEE activity at 253 nm, protein and specific activity, a protein pattern by gel electrophoresis, the chymotrypsin assay, moisture, ICP-MS metals and a micro count.
An outside result is comparable only when the method matches. If the laboratory changes the substrate, pH or temperature, the two numbers describe two assays. Ask for the raw rate, the enzyme weight and the calculation, and give the referee the retained sample and the specification together.
Six lines for a supplier comparison
Put these beside each other: species and tissue of origin; unit definition and method; measured activity and its basis; chymotrypsin ratio; protein and specific activity; moisture, mesh and pack. Offers that agree on 250 USP U/mg and disagree on the other five lines are not the same material.
The catalog entry sits on the trypsin product page; the grades page compares activity grades, the identity page covers the evidence, the methods section holds the assay vocabulary, and the quality page describes release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation