How we prove a pancreatin lot is the declared triad
A pancreatin lot is identified by four agreeing measurements: the tissue and species record, the three USP activities in a declared ratio, an infrared spectrum consistent with the reference, and a mass balance that accounts for moisture, fat and carrier. No single activity identifies pancreatin, because amylase, protease and lipase can each be bought separately and added. The ratio is the part that a single-enzyme substitution cannot reproduce.
Identity for pancreatin is the three activities in the declared ratio, supported by the species record and an infrared spectrum; a single amylase number proves neither the source nor the lipase.
The four identity layers
A certificate can name the right material and still fail to prove it. The four layers below ask separate questions, and each one needs its own evidence.
| Layer | Question | Evidence | What it proves |
|---|---|---|---|
| Tissue and species | Is the pancreas from the named animal? | Species statement, tissue record, supplier audit | The source, not the activity |
| Triad | Are all three activities present, and in what ratio? | Three USP assays on one sample | A three-activity extract |
| Spectrum | Does the powder match the reference? | Infrared spectrum | Consistency with a reference, not purity |
| Mass balance | Is the powder diluted or wet? | Loss on drying, fat, carrier, activity per mg | Consistency of the numbers |
The layers are not alternatives. A species record without an activity result is a label, and three activities without a source record could be a blend.
The activity ratio is the identity test
The minima are 25, 25 and 2 USP U/mg, a ratio of 12.5 : 12.5 : 1 for amylase : protease : lipase. The minima are floors, not a ratio guarantee. A lot at 200, 200 and 2 passes every minimum but carries 100 amylase units per lipase unit, eight times the 25/25/2 ratio, which is a different material for any formula built on the triad.
Pancrelipase makes the point from the other side: its minima are 100, 100 and 24, a ratio of about 4.17 : 4.17 : 1, so it is not a concentrated pancreatin even though it is richer in lipase. The ratio belongs in the specification with a target and a tolerance, and the certificate should print the three results beside the calculated ratio.
The ratio is also the adulteration screen. Adding a single enzyme to lift the amylase or the lipase moves the ratio away from the source material. A blend of three purchased enzymes can be built to hit the triad, but it will not have the tissue record, the infrared spectrum or the fat and protein profile of a pancreas extract.
X-ray diffraction: what it can and cannot show
X-ray diffraction is not an identity test for pancreatin. The powder is a mixture of proteins and residual fat, and it is amorphous; it has no characteristic crystal pattern that a reference could match. A certificate that reports “XRD conforms” for pancreatin has not shown identity, because there is no pattern to conform to.
XRD can still answer a narrow question: whether the powder is mostly crystalline carrier. A lactose or sucrose dilution shows sharp crystalline peaks, and a sample sold as pure extract that shows those peaks is a diluted material. Ask for the reference pattern, the detection limit and the sample preparation before reading a match statement. For a dilution, XRD plus the activity per milligram is more useful than either alone.
What adulteration looks like
| Route | What changes | Check |
|---|---|---|
| Dilution with lactose or sucrose | Activity per mg falls; crystalline peaks appear; loss on drying moves | Activity, XRD, carrier statement, mass balance |
| Single-enzyme spike | One activity rises; the ratio moves; the protein profile changes | Triad ratio, infrared spectrum, protein, source record |
| Another protease source | Protease passes; specificity and ratio change | Triad, infrared spectrum, side-activity panel |
| Water or salt | Loss on drying or ash rises; activity per mg falls | Loss on drying, ash, activity basis |
| Fat or spent tissue | Fat rises, odour changes, activity may fall | Fat, odour, activity, tissue record |
Dilution is the simplest route, and it is easy to detect when the specification asks for the ratio and the mass balance. A single-enzyme spike is harder, because the total activity can look impressive; the ratio and the infrared spectrum are the checks that expose it. The tissue record is the only layer that a blend cannot manufacture.
How to write the identity into the specification
- “Pancreatin from hog or ox pancreas, CAS 8049-47-6, with the species named.”
- “Amylase ≥25, protease ≥25, lipase ≥2 USP U/mg, with the unit definitions and assay conditions.”
- “A target ratio and tolerance for the three activities.”
- “Identification by infrared spectrum and by the three activity assays.”
- “Loss on drying ≤5.0%; fat to the monograph limit for the potency.”
- “Carrier identity and inclusion; particle size ≥95% through 40 mesh.”
- “Species and tissue record retained with the lot.”
A specification written this way can be checked by a second laboratory and audited by a second customer. A line that reads only “pancreatin 25/25/2” cannot.
Five questions for the supplier
- Which species and tissue produced the lot, and what record ties it to the certificate?
- What are the three activity results, on what basis, and by which assay and standard?
- What is the ratio, and what tolerance applies to it?
- What does the infrared spectrum show, and can you provide it with the reference?
- What carrier is present, and what do loss on drying, fat and ash report?
Five direct answers amount to an identity file. A single activity percentage does not. The catalog position is on the pancreatin product page; the certificate lines are on the COA page; the grade options are on the grade page; the methods section describes the analytical panels; the release workflow is on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation