Lumbrokinase MOQ, packs and the first order
Lumbrokinase ships from a 1 kg minimum: one foil pouch, or a 25 kg fiber drum for production. Standard packs leave in 1–7 days. An enquiry becomes an order only when the activity, the pack, the destination, the documents and the intended market are all named in the quotation.
One kilogram is the minimum because that is the smallest pack that can be sampled, assayed and traced as a lot.
Why the entry pack is 1 kg
The pouch is large enough to do three jobs: run a bench trial, hold a retention sample, and supply an outside laboratory for an activity check. It is also small enough to move as a parcel, which helps when a formulator is waiting on material and the production plan is not fixed. Most importantly, it is a packed lot with a code, not a scoop taken from a drum.
A request for a few hundred grams therefore asks for a repack, not a smaller catalogue item. Repacking adds a handling step, detaches the material from its original lot record and makes a later dispute harder to resolve. The drum is the other end of the range: it cuts handling per kilogram but locks up inventory and stretches the storage period. Neither pack exists to reward volume; each is a unit of traceability.
Packs and formats
| Pack | Net weight | Usual role | Practical note |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, retention, small batch | Barrier pack; close it properly after use |
| Fiber drum | 25 kg | Production | Liner keeps moisture out; mark the opening date |
| Granulated | On request | Dust control and flow | Release the activity after granulation |
| Other activity | On request | Formula-specific unit weight | New specification, new certificate |
The catalogue powder is milled to ≥95% through 40 mesh. A granule, a coarser powder or a different activity is a different specification, not an alternative bag. Tell the supplier before the quote is written if the dosage form needs a particular flow, because the change can alter the activity result and the dispatch date. A granulated batch needs a release figure measured after the granulation, not the figure of the powder that went into it.
Lead time and handover
The clock starts when the order is confirmed. The 1–7 day window covers picking, the document set and handover to the carrier; transit, customs and the customer's own quality release sit outside it. A granulated batch, a different activity or a special pack takes longer, and that extra time should appear as a separate line on the quotation rather than as a surprise.
A dispatch date is more useful than a lead time. The Incoterm then settles who books the freight and who clears the entry. For an animal-derived powder, the species and origin statement should travel in the same document pack as the certificate; answering an origin question before the shipment lands is much easier than answering it afterwards.
What a quotation has to state
A quotation that can be compared line for line contains six things:
- Material and activity. Lumbrokinase preparation, CAS 556743-18-1, activity in U/g with the fibrin-plate method named.
- Specification. Activity, protein, loss on drying, particle size, heavy metals and microbiology.
- Pack and quantity. 1 kg pouch, 25 kg drum, or a granulated or other-activity variant.
- Destination and Incoterm. Country, port or address, and the trade term.
- Documents. COA, specification, SDS, source statement and any destination-specific declaration.
- Use and market. Supplement, food or another use, and the market where the finished product will be sold.
Leave out the market and the activity basis and the quotation describes a powder, not a purchase. Commercial terms are not published here; they belong on the quotation and in the quality agreement.
Qualifying on the pack
The 1 kg pouch is the qualification unit. Test activity with the named plate and standard, check protein and loss on drying, and run the microbiology panel before committing to a larger batch. Keep part of the same pack as the retention sample, and make sure the code on the pouch, the certificate and the quotation match.
Activity deserves the most attention. Ask the laboratory to report the plate, the standard and the reading rule, and to put the protein result beside the activity. A sample that reaches 20,000 U/g but shows a protein pattern unlike the reference has passed one test and failed another. The identity page explains the checks that belong with the plate result.
A bench quantity split from a bulk lot is a repack, not the 1 kg catalogue pack. If one is agreed, document it as a repack with its own code, and do not assume it came from the same lot as the later production drum.
Terms to settle before the first production order
Put the quality terms next to the commercial ones: the specification revision, the certificate for each lot, the retention sample, the retest period and the change-control route. Settling them at the start is easier than arguing about them after a rejected delivery.
A failed lot should be handled through the retention sample and a joint re-test, not through a photograph. Agree in advance which laboratory can act as referee, who pays for that test, and which method it will use. For an activity dispute the method is the dispute: a referee plate run with a different standard will not settle anything.
The product hub carries the catalogue specification; the COA page sets out the release tests; the compliance page covers the market file; the MOQ glossary entry explains the abbreviation; the logistics page covers freight and paperwork.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation