03 Stability

Lactase activity falls with heat and moisture; the process decides the shelf life

Technical document 03 · Reviewed 2026-11-19 · Lactase

On this page
  1. Sealed and dry: the stable state
  2. Dissolved: hours, not months
  3. Six ways to lose activity
  4. Designing the study
  5. The blend writes its own stability
  6. From data to a declared life

A sealed pack of lactase at cool, dry storage holds its activity well; what removes activity is the water and heat a formulator applies after opening the bag. Wet granulation, a drying step, a hot fill, a solution left standing and moisture migrating into a stick all act on the same protein, and each one is measurable. A shelf-life figure therefore belongs to a format, not to the raw material.

In one line

Dry and sealed, lactase keeps its activity; heat and water in the process decide how much survives to the end of shelf life.

Sealed and dry: the stable state

Dry is the stable state. The catalog powder is specified at ≤8.0% loss on drying, and within that limit the enzyme sits in a glassy, low-mobility matrix where unfolding is slow. The 1 kg foil pouch and the 25 kg fiber drum are moisture barriers first and shipping containers second; a pack that stays sealed and cool sees little change over its declared life.

Three things break that state. Moisture ingress through a damaged liner or a pack opened and reclosed in a humid room. Heat above ambient in a warehouse roof or a closed container. And condensation, which is worse than steady humidity because liquid water forms on the powder. A drum moved from a cold store into a warm room should be allowed to reach room temperature before it is opened, or the first scoop takes up water from the air.

Dissolved: hours, not months

In solution the enzyme is far less stable than in the pack. Dilution removes the protective dry matrix, exposes the protein to water activity near 1.0, and lets microbial growth and metal-catalysed oxidation into the same vessel. A lactase solution held at room temperature loses activity within hours to days depending on concentration, pH and hygiene, and the loss is not recovered by cooling afterwards.

The pH specification of 3.0–8.0 describes a 1% solution of the powder, and it is a release window rather than a stability window. A liquid blend should be buffered and held cold, and it should be tested for activity at the start and end of its hold time rather than assumed to follow the powder's behaviour. Where a customer wants a liquid format, the shelf life is a matter of days and belongs in a challenge test, not in a transfer of the powder's declaration.

Six ways to lose activity

Loss routes for lactase and the control that answers each
RouteHow it actsControl
HeatUnfolds the protein; the rate of loss rises steeply with temperatureKeep the powder below the process temperature it was tested at; cool after drying
MoistureRaises molecular mobility and enables hydrolysis and microbial growthMoisture-barrier pack, low water activity in the blend, desiccant where needed
pHShifts the protein away from its stable rangeBuffer the liquid; check acidic actives in a dry blend for local acidity
Shear and foamAir–liquid interface denatures proteinLow-shear mixing, no unnecessary recirculation
Metal ions and oxidantsCatalyse oxidation of the proteinSequester metals, avoid oxidising actives in the same premix
TimeSlow loss even in a sealed packDeclare a shelf life from data, not from a rule of thumb

Temperature and moisture interact. A powder held at 8% moisture and 25 °C is not the same material as the same powder at 5% moisture and 25 °C, and a 40 °C excursion on a wet powder costs far more activity than the same excursion on a dry one. That is why accelerated studies run at elevated humidity as well as elevated temperature.

Designing the study

A useful study tests the material in the form the customer will store, at the conditions the customer will meet, with the assay the specification uses. Three lots, because lot-to-lot variation in a fermentation product is real. Assay at release, then at three, six, twelve and twenty-four months, with 25 °C/60% RH and 30 °C/65% RH bracketing the usual ambient warehouse. An accelerated arm at 40 °C/75% RH gives a direction of travel, not a shelf life on its own.

Test the finished blend, not only the raw powder, and validate the extraction before trusting the number: an enzyme recovered from a stick that contains citric acid, minerals and a sweetener can read low for reasons that have nothing to do with inactivation. Record loss on drying and water activity beside the activity, because a falling assay with rising moisture is a different finding from a falling assay at constant moisture.

The blend writes its own stability

In a powder stick or a drink mix the enzyme shares space with acids, salts, sugars and flavours. An acidic ingredient can create local low-pH pockets in a poorly mixed blend; a hygroscopic sugar can raise water activity; a mineral premix can supply the metal ions that catalyse oxidation. None of these shows up in a study of the raw powder alone.

Tableting has its own arithmetic. Direct compression is a dry, brief event and is usually gentle on activity; wet granulation is the opposite, because the powder meets water and then heat, and the drying step is where most of the loss occurs. A tablet specification written for a dry blend will overstate what a wet-granulated tablet contains. The COA page sets out how the post-process figure is reported.

From data to a declared life

A shelf life is a statement about a package, a storage condition and an activity floor, and all three have to appear together. "24 months at 25 °C with a stated activity floor" is a testable promise; "stable" is not. The declaration should also say whether the figure on the label is the release activity or the end-of-life activity, because the two differ by the loss the pack is expected to take.

Where the data do not cover the whole period, the honest options are a shorter declared life, a higher overage with a declared floor, or a retest date — not an extrapolation. The ordering page covers what to ask for at shipment, the quality page describes the release workflow, and the catalog figures sit on the lactase product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation