06 Identity & adulteration

How we prove a glucose oxidase lot is glucose oxidase

Technical document 06 · Reviewed 2026-11-20 · Glucose Oxidase

On this page
  1. The identity chain
  2. Specific activity and the catalase ratio
  3. X-ray diffraction: a carrier check, not an enzyme test
  4. What adulteration looks like
  5. Writing identity into the specification
  6. Five questions for the supplier

A glucose oxidase lot is the named enzyme when the activity assay, the protein pattern and the preparation description agree. The activity proves the reaction, the protein pattern shows the enzyme, and the carrier, source and moisture explain the rest of the powder. An activity figure alone can be matched by a dilution, a different source or a heat-damaged lot.

In one line

Identity is an activity plus a protein and a preparation: the assay proves the reaction, the protein pattern shows the enzyme, and the carrier explains the rest of the powder.

The identity chain

A certificate can carry the right name and still say little about the powder. Each layer below answers a different question, and each needs its own result. A supplier who replies only with the document has repeated the label, not tested the material.

Identity checks from paperwork to powder
CheckQuestionMethodEvidence
DocumentIs the enzyme named?Name, CAS number, EC number, sourcePaperwork only
ActivityIs the reaction glucose oxidase?Peroxidase-coupled glucose assayThe reaction, not the protein
ProteinIs the enzyme protein present?Protein assay, SDS-PAGE, specific activityThe protein, not the activity alone
PreparationWhat else is in the powder?Carrier, loss on drying, metals, microbiologyThe powder as sold

The layers answer different failures. A carrier dilution passes the document layer and shows up in the activity and preparation layers; a heat-damaged lot passes the document and protein layers and fails the activity layer; a carrier that was not declared passes the activity layer and fails the preparation layer.

Specific activity and the catalase ratio

Specific activity, in units per milligram of protein, is the ratio that separates active enzyme from the rest of the powder. A carrier dilution lowers U/g and may leave the specific activity unchanged; inactive protein lowers U/g while keeping the protein figure normal, so the specific activity falls. The protein method matters: Bradford, BCA and Kjeldahl do not give the same denominator, and the specification should name the method and the standard.

The second ratio is the catalase side activity. Glucose oxidase preparations can carry catalase, which destroys the hydrogen peroxide the coupled assay depends on and depresses the apparent glucose oxidase result. Report catalase U/g and the ratio of catalase to glucose oxidase. A high ratio is not automatically a defect: it matters when the application depends on peroxide accumulation, and it is a lot-consistency number in every case.

The reaction stoichiometry gives a third check. One molecule of glucose yields one molecule of hydrogen peroxide; a peroxide assay that recovers less than the activity predicts points to catalase or another peroxide consumer in the powder.

X-ray diffraction: a carrier check, not an enzyme test

Glucose oxidase is an amorphous protein, so X-ray diffraction gives a broad halo rather than a sharp pattern. XRD cannot identify the enzyme and cannot measure its activity. It can, however, show a crystalline carrier or a crystalline additive: lactose gives sharp peaks, and a powder declared carrier-free that shows a crystalline pattern has something in it that the specification did not name.

The useful question is therefore not “does the pattern match glucose oxidase?” but “does the pattern match the declared preparation?”. Before accepting a statement that the pattern matches, ask for the reference and the detection limit. For this product XRD is not a release test, and a claim of conformity without the pattern adds nothing measurable. The method is described in the XRD method note.

What adulteration looks like

How substitutions show up in the data
AdulterantEffectSignalMethod
Carrier dilutionLowers U/g and enzyme per gramActivity low; carrier declaredActivity, protein
Inactive proteinKeeps protein high, activity lowSpecific activity lowProtein assay, SDS-PAGE
Heat-damaged enzymeLoses units without changing the proteinActivity low; no recoveryActivity re-test, batch record
Catalase side activityConsumes peroxide; depresses the coupled assayCatalase U/g high; ratio shiftedCatalase assay
Crystalline sugar or saltAdds mass; lowers activity per gramSharp XRD peaks; moisture or ash shiftXRD, loss on drying

Colour is the weakest signal. Yellow to light tan covers a wide range, and a heat-damaged lot can keep the same colour while losing units. The stronger signals are the activity, the protein figure and the declared carrier. A certificate that reports appearance and activity but no protein or preparation data leaves the most likely substitution unchecked.

Writing identity into the specification

  • “Glucose oxidase (EC 1.1.3.4), CAS 9001-37-0; production organism named.”
  • “Activity ≥10,000 U/g by the glucose/peroxidase assay, with pH, temperature, substrate and detection system.”
  • “Identification by activity assay and protein pattern; report both.”
  • “Specific activity in U/mg protein, with the protein method named.”
  • “Catalase side activity reported, with the catalase to glucose oxidase ratio.”
  • “Loss on drying ≤8.0%; particle size ≥95% through 80 mesh.”
  • “Carrier and source named; heavy metals and microbiology as listed.”

An identity specification written this way can be checked by a second laboratory. A list of names and a U/g figure cannot.

Five questions for the supplier

  1. Which production organism and strain are used, and which CAS and EC numbers are on the certificate?
  2. What is the activity result, and what were the pH, temperature, glucose concentration and detection system?
  3. What is the protein content and specific activity, and which protein method was used?
  4. What catalase activity is present, and what is the catalase to glucose oxidase ratio?
  5. If a result is challenged, will you share the retain for a joint re-test under the named method?

Five clear answers build an identity file; one activity number does not. Catalog values sit on the product hub; the COA page shows where each number belongs on a certificate; source and carrier options are compared on the grades page; the level-four comparison explains how catalase relates; assays are described in the methods library; release is covered on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation