04 MOQ & ordering

Chymotrypsin MOQ, packs and the order that follows

Technical document 04 · Reviewed 2026-11-19 · Chymotrypsin

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. A sample must be traceable to a lot
  6. What to fix before ordering

The smallest chymotrypsin order is 1 kg, packed in a foil pouch; the 25 kg fiber drum is the production format, and the standard lead time is 1–7 days. A quotation only becomes firm once six details are known: the source, the activity and its method, the trypsin limit, the pack and quantity, the destination and Incoterm, and the paperwork, together with where the finished product will be sold.

In one line

One kilogram is the smallest unit we can release as a lot: it can be assayed, retained and traced before a production order is placed.

Why the minimum is 1 kg

A kilogram is enough for a bench trial, a retained portion and an ATEE assay in the buyer's laboratory, and the method is sensitive enough that a trial consumes very little. The pack travels as a parcel, which suits a project that has not yet fixed its production plan, and it carries a lot code that ties the sample, the certificate and the trial result together.

Smaller quantities are cut from a larger lot and repacked. That is a legitimate way to run a bench test, but it creates a second pack identity and a traceability gap, so it should be ordered and documented as a repack. At the other end, a drum lowers handling per kilogram and also fixes inventory against a retest period; buying more than the line will use in that period is a storage decision, not a saving.

Packs and formats

Standard chymotrypsin packs
PackNet weightTypical useNotes
Foil pouch1 kgTrial, sample, small batchFoil barrier; reseal between weighings
Fiber drum25 kgProductionKeep the liner sealed; copy the lot code inside
Granulated powderOn requestFlow and dust controlSieve result and wetting time move
Diluted powderOn requestFewer units per gramCarrier and label both change

At least 95% of the catalog grade passes through 40 mesh. Granulation or dilution is a new specification, not another way of packing the same powder, because it changes the particle-size result, the carrier statement and the units per gram. Raise the need for a coarser or freer-flowing material before the quotation, since the extra step also moves the dispatch date.

Lead time and dispatch

The standard grade is dispatched 1–7 days after the order and the specification are confirmed. The window covers picking, document preparation and handover to the carrier; transit, customs clearance and the buyer's own quality release sit outside it. A granulation or a dilution needs its own lead time.

Ask for a dispatch date, not only a number of days. Certificates and source statements should be in the same shipment as the powder, because a lot that arrives without its paperwork waits in quarantine. The Incoterm names who books the freight and who clears the entry, and it should cover the documents as well as the drum.

What a quotation needs

Six points separate a comparable offer from a vague one:

  1. Product and source. Chymotrypsin, CAS 9004-07-3, with the tissue and species named.
  2. Activity. USP units per milligram by ATEE at 237 nm, pH 7.0, 25 °C, and the basis of the figure.
  3. Companion activity. The ratio written into the specification, and the figure reported on the certificate.
  4. Pack and quantity. The 1 kg pouch or 25 kg drum, unless a granulated or diluted grade is needed.
  5. Route. Destination country, delivery point and Incoterm.
  6. Paperwork and use. Documents required and the market where the finished product will be sold.

The quotation holds the commercial terms; the technical case is on this page. An offer that omits the source or the trypsin limit cannot be compared with one that includes them.

A sample must be traceable to a lot

Qualification starts with the 1 kg pack itself. Run the ATEE assay by the method on the specification, retain a portion, and set the result beside the certificate supplied with the pack. Sample, COA and quotation should carry the same lot code; if they do not, the exercise is a demonstration rather than a qualification.

A bench quantity below 1 kg is a repack and should be labelled as one. It may not come from the same lot as the drum that follows, and a supplier should not be qualified on a sample drawn from a different grade.

What to fix before ordering

Commercial terms, delivery terms, pack size and dispatch window all live on the quotation. The quality terms belong next to them: the specification revision, a certificate for each lot, the retained sample, the retest period and the change-control route. Settling these before the first production order is cheaper than settling them after a dispute.

Returns and replacements are governed by the quotation and the quality agreement. If a lot fails the agreed specification, resolve it through the retained sample and a joint re-test at a laboratory acceptable to both sides, not through a photograph. Agree the storage condition on arrival too: dry, cool, closed, with the opening date written on the pack.

Start with the chymotrypsin product page for the catalog entry. Release tests are on the COA page, storage and pack behaviour on the stability page, and source documents on the compliance page; the glossary entry defines MOQ, and the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation