03 Stability

Amylase activity falls with heat and moisture; the process decides the shelf life

Technical document 03 · Reviewed 2026-11-19 · Amylase

On this page
  1. The pack is the first barrier
  2. The wet step takes the largest toll
  3. Seven ways activity disappears
  4. Designing the study
  5. The blend can matter more than the store room
  6. From data to a labelled date

Heat, water and a pH outside the working band are the three ways this enzyme loses activity, and a processing line tends to apply all three at once. A dry powder in a sealed pouch is the stable case; a wet granulate, a warm slurry or a tablet punch is where the loss happens. The shelf life printed on a pack therefore describes a product and its process, not the raw material in isolation.

In one line

A sealed foil pouch holds the SKB/g figure; the wet step, the drying heat and the water activity of the blend decide what is left at the end of shelf life.

The pack is the first barrier

Water is the switch. With little free water present, the protein is held still and the reactions that break it down are slow. A sealed foil pouch or a lined drum at room temperature can hold the declared figure for many months, while a pouch left open in a humid room will not: the powder is hygroscopic and takes up water from the air.

The loss-on-drying limit of ≤8.0% is a release gate rather than a guarantee about the water that matters. Oven loss and water activity are different measurements, and the loss-on-drying note explains why a passing figure does not describe how the powder will behave in a blend.

The wet step takes the largest toll

Once dissolved, the enzyme is a protein with its structure exposed to water, and the loss rate climbs with temperature and with pH away from the working band. A slurry held warm through a shift can lose a measurable part of its activity before the filling line is reached, and contaminating microorganisms add a second route: their proteases cut the enzyme.

A heat step is harsher still. Fungal alpha-amylase from Aspergillus oryzae is a mesophilic enzyme, typically quoted as working between about 45 °C and 65 °C and inactivated by a hold at 80 °C; the figures for this preparation belong in the technical data sheet, because they shift with pH and substrate. Activity removed by a pasteuriser or a hot fill does not come back on cooling, so the charge has to be set for the far side of the step.

The pH of a 1% solution, 4.8–5.4, describes how the powder behaves in water. It is not a promise that any wet blend will stay inside the enzyme's working range; a mix that sits well below the band for an hour is outside it.

Seven ways activity disappears

Loss routes and the practical answer to each
RouteMechanismAnswer
HeatProtein unfolding; no recovery on coolingAdd enzyme after the hot step, or overage for it
Free waterMobility returns; hydrolysis and oxidation resumeLow water activity; dry the granule properly
pH shiftStructure changes away from the working bandBuffer the wet mix; check acidic components
GranulationWater, binder and drying heat in one operationLow-water binder; short, cool dry
CompressionLocal heat and shear at the punchDirect compression; assay the finished tablet
Metal ionsIron and copper catalyse oxidationCheck the mineral source; test the blend
Open packHumid air enters the headspaceReseal; desiccant; small sample packs

Designing the study

Three production lots, one assay method, and a sampling plan that covers the storage the product will actually see. Test activity, loss on drying, appearance and microbiology at each point, and report activity as a percentage of the initial value so the trend is visible.

Storage arms and the question each answers
ArmSamplingPurpose
25 °C / 60% RH0, 3, 6, 12, 24 monthsLabel life in a temperate market
30 °C / 65% RH0, 3, 6, 12 monthsWarmer storage and distribution
40 °C / 75% RH0, 1, 3, 6 monthsAccelerated comparison of formulations
Process stepBefore and afterActivity removed by granulation or drying

Run the arms on the sale pack, not on a laboratory jar of concentrate. A diluted grade in a foil stick has a different carrier load, headspace and fill weight from a drum, and those differences belong in the data. Where a process step is planned, sample across it so the loss is measured rather than assumed.

The blend can matter more than the store room

An acidic fruit powder drops the local pH as soon as water appears. Ascorbic acid with a trace of iron or copper can generate oxidants that attack the protein. Mineral salts can speed up or slow the enzyme depending on the metal, and a reducing sugar in a wet granulation keeps water inside the granule. The formula, in other words, sets the conditions the enzyme will meet.

Dry blending and direct compression avoid adding water and heat, which suits a stick pack or a drink mix. Where granules are needed, keep the binder low in water, the dry short and the temperature low, then assay the granule rather than calculating its activity from the powder. The custom processing page describes how a process trial is scoped.

The pack finishes the job. A sound foil seal, a desiccant where humidity is high, and a fill weight that limits headspace all slow the loss. A stick pack has far more surface per gram than a drum and is opened once, so pack format belongs in the shelf-life claim.

From data to a labelled date

Take the last time point at which activity remains above the declared minimum, subtract a margin for assay variability and lot-to-lot spread, and write the storage conditions beside the result. The margin is a judgement, and the data should show it was made with room to spare.

Three lots are the minimum for a defensible date; one lot can be unusually good. If the pack promises "not less than 100,000 SKB/g at end of shelf life", release has to sit above that figure by enough to cover both the loss and the spread.

Storage wording belongs on the pack and on the certificate: dry, closed, away from heat. The delivery terms that depend on shelf life are on the MOQ and ordering page, the release sequence is on the quality page, and the catalog values are on the amylase product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation