What the COA for fungal alpha-amylase actually contains
A fungal alpha-amylase certificate is short: appearance, SKB activity, pH, moisture, mesh, metals and microbiology. Every line but one is a conventional check. The activity line is a kinetic measurement, and its value depends on how the laboratory ran the starch-iodine assay. What follows is the catalog specification and the reading a buyer should apply to the batch document that arrives with a drum.
An SKB/g figure is a dextrinisation rate measured under one assay, so a certificate has to carry the unit definition, the starch substrate and the conditions next to the activity.
What a release certificate has to carry
Each line answers a question: what the powder looks like, what it does, how it behaves in water, how much water it retains, how it flows, what contaminates it and what is growing in it. Three columns — parameter, method, limit — make those answers auditable. The activity line also needs the assay conditions and the unit definition, or the number cannot be repeated by anyone else.
| Test | How it is run | Limit |
|---|---|---|
| Appearance | Visual inspection | Off-white to light tan, free-flowing powder |
| Amylase activity | Iodine dextrinisation on soluble starch, reported in SKB/g | ≥100,000 SKB/g |
| pH, 1% solution | Potentiometry | 4.8–5.4 |
| Loss on drying | Gravimetric | ≤8.0% |
| Particle size | Sieve analysis | ≥95% through 40 mesh |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count plus absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
CAS 9000-90-2 identifies alpha-amylase as an enzyme, not the drum in front of you. A specification should therefore also name the production organism, the carrier and the lot, because those three define the preparation that was actually tested.
Reading the SKB/g figure
The number begins as a time. A diluted sample is mixed with soluble starch at 30 °C and pH 4.8, and the clock stops when the iodine colour matches the reference. A shorter time means more enzyme. The method multiplies the starch charge by a fixed factor and divides by sample weight and time, so the output is units per gram of powder as sold.
The unit is small by design, which is why commercial figures run to six digits: at 100,000 SKB/g, a kilogram holds a hundred million units. Protein content is a separate measurement, and activity divided by protein — specific activity — is what separates a genuine concentrate from a powder that has been extended with carrier.
| Item | Required detail | Effect if it is missing |
|---|---|---|
| Unit basis | SKB per gram of powder as sold | Could be mistaken for units per gram of protein |
| Starch | Soluble starch, supplier and grade named | Two starch lots give two rates |
| Temperature | 30 °C, as the method specifies | A rate at another temperature is a different number |
| pH | 4.8, as the method specifies | Activity drifts outside the working window |
| Colour reference | Iodine standard, identified | The endpoint moves, and so does the time |
| Calculation | Starch × factor ÷ (sample × time) | The factor is part of the method, not the enzyme |
| Moisture basis | As-is, or calculated to dry solids | Water changes the figure without changing the enzyme |
One-sided limits, and what the result adds
≥100,000 SKB/g is a floor. A lot released at 104,000 SKB/g and a lot released at 190,000 SKB/g are both compliant, and they behave differently in a process that will consume part of the activity. The measured value is the useful number; the limit only tells you the powder passed.
Ask for three fields beside the result: the method reference, the release date, and a statement of whether the figure describes release or the end of the declared shelf life. A buyer comparing two offers without the third is comparing different promises. A retest date, and the assay's relative standard deviation, complete the picture: where repeatability is poor, a result slightly above the floor is not a comfortable margin.
Where lot-to-lot spread comes from
Fermentation is biology, and biology drifts. Strain, medium, aeration and harvest time change the protein mixture in the broth; ultrafiltration decides how much of it is carried into the concentrate; standardisation with a food-grade carrier fixes the final activity per gram. Where a supplier lands inside the release window is a commercial decision as much as a technical one.
Water and heat move the figure after fermentation. A powder dried to a higher moisture reads lower per gram even though the enzyme is intact, and frictional heat at the mill can destroy activity before the sieve is reached. Colour deserves a note rather than a rejection: a tan shift can follow a longer or hotter dry while the assay still passes, so check the batch record before reading colour as a failure.
Method drift is the quiet one. A new starch supplier, a re-made iodine reference or a different incubation bath makes two SKB/g results incomparable even when both certificates use the same words.
Buying an independent assay
Outside testing earns its place when the source is new, when the market is new, when a customer disputes a result, or when a label statement rests on the activity figure. The panel can stay narrow: activity by a named SKB method on a retained sample, protein, loss on drying, ICP-MS metals, microbiology, and a protein pattern against a reference lot.
The laboratory must use the same starch, temperature and endpoint as the specification, or the exercise compares methods rather than powders. A report in DU is not a second opinion on an SKB/g result — SKB and DU are different scales. Require the lot code on the sample and on the report, and check the accreditation scope behind each test.
Six lines for a side-by-side review
Line up the unit, the method and its conditions, the measured result, protein or specific activity, moisture and mesh, and the strain with the carrier. Two suppliers can agree on SKB/g and disagree on the other five, which means the powders are not interchangeable; the difference will appear at the first trial, not on the quotation.
Traceability comes next. The certificate, the bag and the retained sample should share one lot code, and the certificate should name the organism and strain. A genuine certificate attached to a different lot is still the wrong document for the delivery.
Catalog values sit on the amylase product page. The dilution and substitution checks are on the identity page, the release sequence behind the document is described on the quality page, and the terms are defined in the COA glossary entry.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation