04 MOQ & ordering

Alkaline protease: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Alkaline Protease

On this page
  1. Why the minimum is 1 kg
  2. The packs and what they do
  3. Lead time and what moves it
  4. Six facts a firm quotation needs
  5. What a sample can and cannot show
  6. The terms that belong in writing

One kilogram is the minimum order because that is the pack that is filled, sealed and labelled, and every larger order is the same powder in more pouches or in a 25 kg fibre drum. The catalog lists 1 kg foil pouches and 25 kg drums, a 1–7 day lead time and a batch COA with each lot. A firm quotation needs six facts before it can be issued, and the sample is drawn from the same lot as the order whenever the schedule allows.

In one line

One kilogram is the ordering unit because that is the pouch that is filled and sealed, and a 25 kg drum is the same powder in one container rather than a lower minimum.

Why the minimum is 1 kg

The 1 kg pouch is the smallest unit the packing line fills, seals and labels, so it is the smallest unit that can carry a lot code, a certificate and a stable seal. Selling below it would mean opening a sealed pack and weighing out a portion, which turns a traceable lot into an open container with no retained-sample history.

The quantity also matches the way the powder is used. At ≥200,000 U/g, one kilogram carries at least 200 million units. A blend that includes the enzyme at a fraction of a percent consumes a few grams per batch, so a single pouch covers a bench trial, a pilot run and often the first production campaign.

Above 1 kg the order is built from the same unit. A 25 kg drum holds twenty-five kilograms of the same lot, packed under a food-grade liner, and a pallet holds the drums.

The packs and what they do

Catalog packs for alkaline protease powder
PackWhat it holdsHandling note
1 kg foil pouchHeat-sealed foil laminate, labelled with lot, activity and storageReseal between weighings; the pouch is the storage container once opened
25 kg fibre drumFood-grade liner inside a fibre drumKeep the liner closed; do not store against a warm wall or a wet floor

A foil laminate resists water vapour; a fibre drum is strong but not a moisture barrier by itself, which is why the liner matters. Labelling carries the product name, the activity with its unit, the lot code, the storage statement and the production organism, and the same lot code appears on the certificate and on the retained sample.

If the receiving warehouse will decant the powder into its own container, that transfer belongs in the handling instructions. An open drum in a humid room picks up water faster than a sealed pouch, and the stability page explains what that does to the activity figure.

Lead time and what moves it

The catalog lead time is 1–7 days for a standard grade in a catalog pack. The short end applies to material in stock; the long end covers a lot that has to be packed, labelled and documented before dispatch. The range is a commitment to dispatch, not a transit time, and the transport leg is added by the Incoterm chosen for the order.

Four things push an order toward the long end. A lower-activity dilution has to be prepared and assayed, which adds a production step. A granulated grade adds another. A specification that differs from the catalog — a different mesh cut, a tighter micro limit, a customer-specific carrier — needs a trial and a release test. Third-party testing, where the buyer asks for an independent laboratory report with the shipment, adds the laboratory’s turnaround on top of production.

Documentation is usually the part that surprises a first order. A full pack includes the certificate for the lot, the technical data sheet, the safety data sheet, the allergen and GMO statements, and the origin record.

Six facts a firm quotation needs

A quotation that names only a product and a quantity will be revised. Six facts make it firm and comparable with another supplier’s:

  • Specification and revision. The document the lot will be released against, not just the product name.
  • Grade and activity. The U/g figure, the unit definition and the assay method behind it.
  • Quantity and pack. Kilograms, the number of pouches or drums, and whether the pack is the catalog format.
  • Destination and Incoterm. The port or door, and which side pays freight, insurance and duty.
  • Document set. COA, TDS, SDS, allergen, GMO and origin, plus any legalisation the destination requires.
  • Required date and use. When the material is needed on the line, and the process it will enter, so the grade can be checked against it.

With those six, two quotations can be compared line by line. Without them, a difference in the activity basis or the pack can look like a difference in the offer.

What a sample can and cannot show

A sample shows identity, activity by the buyer’s own method, solubility, flow and dust. It is enough to run a bench blend and to see whether the powder disperses the way the process needs. It is not enough to establish lot-to-lot consistency, shelf life or packing performance, because those are properties of a series and of a pack rather than of one bag.

Ask for the sample to be drawn from a lot with a certificate and to carry the same lot code, so that the activity measured in the buyer’s laboratory can be compared with the release result. Where the first production order follows quickly, the sample can be the 1 kg pouch itself, which removes a repacking step and keeps the chain from drum to trial intact. The COA page sets out what the certificate next to that sample should contain.

The terms that belong in writing

Four terms carry most of the risk. The Incoterm fixes where the seller’s responsibility ends and the buyer’s begins, including who arranges insurance and who clears export. The quotation validity fixes how long the offer holds when the buyer plans a campaign months later. The document list fixes what arrives with the lot, so that a missing SDS is a contractual gap rather than a delay. And the change-control clause fixes what happens if the carrier, the strain or the assay method changes: the buyer should hear about it before the next drum is packed, not after.

Storage on receipt is the buyer’s half of the same agreement. The pack is designed for a cool, dry store, and a drum left on a loading dock in summer is outside the condition the shelf life was built on. Agree the receiving check as well: lot code against certificate, pack integrity, and a retained sample before the pouch is opened. The grades page covers what changes when a different format is ordered, and the lead-time glossary entry explains how the dispatch window is counted.

The catalog figures and packs are listed on the alkaline protease product page, and the release workflow behind each lot is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation