L-theanine MOQ: 1 kg, packaging and the order file
The MOQ for L-theanine is 1 kg, supplied as a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack and a 1–7 day lead time for the standard material. A firm quotation needs the source route, the assay basis, the enantiomer specification, the pack, the destination and the intended market. What ships is a traced lot with its own certificate, supplied in a pack sized for a first trial.
The 1 kg pouch is the smallest unit that keeps the sample, the certificate and the production material on one lot code.
What one kilogram covers
One kilogram covers the three jobs a first order usually has: a bench trial, a retained sample and an outside test. For L-theanine the outside test often includes polarimetry or chiral HPLC, and both need enough material to run a duplicate. The pouch also moves as a parcel, which lets a formulator start before the production plan is signed.
A smaller amount is normally split from a larger lot and repacked, which adds a handling step and breaks the link between the pack and the original lot without improving the material. At the other end, the 25 kg drum lowers the handling per kilogram but ties up inventory and storage time. The minimum is set by the smallest pack that stays traceable, not by a volume discount.
Pack sizes and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening |
| Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner |
| Granulated powder | On request | Flow and dust control | Different particle-size specification |
The standard material is milled to pass 80 mesh at 95% or better. A granule is a separate specification and cannot be handled as an alternative fill of the same product. If the press or the stick line needs a coarser particle, raise it before the quote, since the sieve change affects the specification line and possibly the schedule.
The powder is hygroscopic, so the pack is part of the specification. A pouch that has been opened and folded over is not resealed in the same sense as a heat-sealed pack. For a long storage period, transfer the remainder to a smaller dry container or use it within the stated in-use period.
From order to dispatch
For the standard pack, the quoted window is 1–7 days after the order is confirmed. Picking, paperwork and handover to the carrier happen inside that window; transit, customs and the buyer's own release happen outside it. A granulated or non-standard pack needs its own estimate, which the quotation should show as a separate line.
Get a dispatch date rather than only a range. The pouch normally ships as a parcel and the drum as a pallet, and the Incoterm decides who books the freight and who clears import. The lot documents should be issued with the goods, not sent after them.
What the quotation must state
Six items make a quotation firm enough to compare:
- Product and enantiomer. L-theanine, CAS 3081-61-6, with the L form and the source route written out.
- Specification. Assay and basis, specific rotation, chiral HPLC result where agreed, loss on drying, particle size, heavy metals and microbiology.
- Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant.
- Destination and Incoterm. The country, the port or address, and the trade term.
- Documents. COA, specification, SDS, and any market-specific statement the importer needs.
- Intended use and market. Supplement, food or another use, and the market where it will be sold.
A quotation without the source route and the enantiomer is incomplete. The same assay can come from a tea-derived lot or a fermentation lot, and in the EU those routes do not lead to the same regulatory file. The commercial terms are stated on the quotation, not on this page.
The sample carries a lot code
The 1 kg pack is the qualification sample. Test identity, assay, specific rotation, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. If the enantiomer is part of the label, add chiral HPLC. The lot code on the sample, the COA and the quotation should match.
If the trial needs only a few hundred grams, that material is a split from a bulk lot and not the catalog pouch. It carries a handling record of its own and should not be described as the 1 kg pack. Request the split in writing and file its lot code with the trial data. The bench sample and the production drum can come from different lots even when the certificate reads the same.
What the quality agreement should cover
Set out the trade term, the pack, the dispatch window, the revision of the specification, one certificate per lot, the retained sample, the retest period and the change route in a single document. A quality agreement in place before the first production order saves the same conversation later, when a problem has already appeared.
The change-control clause deserves particular attention for this product. A change of source route, from tea-derived to fermentation or the reverse, is not a supply detail: it can change the impurity profile, the EU regulatory position and the documents. Handle it as a specification change that needs the buyer's written approval, not as a substitution the supplier can make when stock is short.
When a lot falls outside the agreed specification, the evidence is the retained sample and a joint re-test by the named method, not a picture of the drum. The agreement should name the referee laboratory, say who pays for it and set the turnaround. Start with the product hub for the catalog specification, then the COA page for the release tests and the compliance page for the market file. The MOQ glossary entry defines the term, the logistics page covers shipping and documents, and the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation