The regulatory file for L-theanine
L-theanine is supplied as the isolated L-enantiomer, CAS 3081-61-6, and its regulatory file turns on two things that a generic “theanine” order does not fix: the source route and the destination market. The specification and the COA describe the powder; the file adds the route, the limits and the label. The buyer's team owns that call; this page lists the documents and checks that belong in the file.
The specification describes the powder; the regulatory file shows the source route, the limits and the label for the destination.
What belongs in the file
The file for an L-theanine lot has to carry the version of the specification that was bought, the certificate for the released lot, the destination's rules on contaminants and labelling, and a record of what happens when the source or the process changes. The COA is a lot document, the TDS is the specification and the SDS is about handling; none of those three decides the market route, which is written down separately.
Beyond the certificate, the pack should carry the allergen and GMO statements, the origin record for the manufacturing source, the residual-solvent statement, the source-route declaration and any market-specific declaration the importer needs. A versioned document list at the front of the folder makes the gaps visible before the order moves.
European Union
For the EU, the source route is the first question. L-theanine occurs naturally in tea, and material extracted from tea leaves relies on that history of use. Fermentation-derived or synthesised L-theanine has been treated as a novel food, and an application for the isolated material has been under assessment. As of this review, check the current novel-food catalogue, whether an authorisation has been adopted, and the specification attached to it. A tea-derived lot and a fermentation lot do not automatically share a regulatory route.
General food law, labelling and contaminant limits sit alongside that route, and the current consolidated text is the reference. The EU regulatory notes collect the framework references. The finished product's dose and the member-state route are the buyer's decisions; the supplier's file supports them with the specification, the certificate and the source record.
United States
In the US, L-theanine is sold as a dietary ingredient, and the Supplement Facts panel names it. A structure/function statement needs substantiation and the DSHEA disclaimer, and no disease claim is open. If the intended use is a conventional food rather than a supplement, the basis is a GRAS determination or a prior sanction for that use; GRAS notices exist for defined L-theanine uses, but they are use-specific and do not cover every food category.
The source route is part of the identity and the supplier's documentation, not a separate ingredient name. The buyer checks that the certificate and the specification match the material the label declares, and that any claim is reviewed on its own terms rather than inferred from the certificate.
Contaminant limits for the dose
Contaminant limits are set by what the consumer takes, not by the drum alone, so the lot result has to be converted through the daily dose. The figures below are a starting point for a food-supplement file; the destination's current text and the amount per serving decide the final number.
| Parameter | Typical supplement reference | What the file should show |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies |
| Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
The enantiomer is a specification line, not a contaminant. A D-theanine limit, if the buyer needs one, belongs in the identity section of the specification and on the certificate as a chiral HPLC result; it is not covered by the heavy-metal panel. The same applies to any caffeine limit for a tea-derived lot.
Claims, label and the register
The label carries L-theanine as the ingredient name, with the amount per serving and whatever source wording the market demands. Claim review is a separate exercise, done by the brand against the finished product, the ingredient form and the destination. The certificate is evidence about the powder; it is not evidence for a claim, and changing the claim does not change the specification.
In the EU, the claims assessed for L-theanine in 2011 were not substantiated, and the register carries no authorised claim for the ingredient as of this review. “Relaxation” is a positioning word, not an authorised health claim, and no disease-related claim is open in either market. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. This site publishes the specification and makes no health claim.
The document set
The buyer's file needs the COA with the assay and its basis, the specific rotation, the infrared and HPLC identity, the chiral HPLC result where agreed, loss on drying, the metal panel and the micro count. The specification must name L-theanine, the L form and the source route; an assay without the rotation leaves the enantiomer open, and a certificate without the route leaves the EU question open. Add the TDS, the SDS, the allergen and GMO statements, the origin and residual-solvent records, and the source-route declaration. The product hub carries the catalog specification.
Pre-order checklist
- Specification version, CAS, L form and source route are named.
- COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file.
- The specific rotation and any chiral HPLC result are on the certificate.
- The contaminant results are converted to the finished-product dose.
- The EU novel-food status is checked against the declared route; the US basis is checked against the intended use.
- The label and the claim have been reviewed for the destination.
- The source, process and pack are under change control, and the quotation, specification and certificate refer to the same version.
The identity page covers the analytical evidence, the MOQ page covers the order, and the quality page describes the release file. The methods library explains the tests behind the numbers.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation