How we prove an L-ornithine lot is the L free base
Four lines of evidence, not one, make an L-ornithine identity file: the document names the form and CAS number, HPLC retention identifies the amino acid, polarimetry fixes the L configuration, and pH plus chloride show whether the free base or the salt is in the drum. A single assay can be met by more than one of those materials.
The rotation proves the L form, the HPLC proves the amino acid, and the pH plus the chloride line show whether the hydrochloride has replaced the free base.
The identity layers
Identity is not a single test, and a certificate that answers only the first question has described the label rather than the powder. Each layer below needs its own evidence.
| Layer | Question | Test | What it proves |
|---|---|---|---|
| Document | Which form is named? | Name, CAS number, formula | Only the paperwork |
| Chromatography | Is the amino acid ornithine? | HPLC retention and IR spectrum | The molecule, not its handedness |
| Configuration | Is it the L form? | Specific rotation; chiral HPLC if disputed | The enantiomer |
| Counter-ion | Base or hydrochloride? | pH of a 1% solution; chloride | The form |
| Mass balance | Is it diluted? | Assay, loss on drying, related substances | Whether the numbers agree |
Polarimetry and the enantiomer ratio
A polarimeter reports an angle. Dividing that angle by the concentration in grams per millilitre and by the path length in decimetres converts it to specific rotation. A 1% solution that reads +0.230° in a 10 cm cell therefore corresponds to +23.0°. The conversion is why the certificate must state the solvent, the concentration, the temperature and the wavelength.
The catalog window is +22.0° to +24.0° on the dried basis. A pure L lot sits inside it, a racemic mixture reads near zero, and a D-enriched lot falls below the window. The window is a tolerance, not a purity limit: a small D fraction can hide inside it, and a blend can be adjusted to land within it. When enantiomeric purity matters, ask for chiral HPLC and the enantiomeric ratio, not only the angle.
Read the rotation with the assay. A low assay and a normal rotation point to water or a diluent; a normal assay and an abnormal rotation point to the other enantiomer. A rotation quoted without conditions cannot be reproduced, so it is not evidence.
Diffraction and the solid form
X-ray diffraction sees how the molecules pack in the solid. It separates a crystalline powder from an amorphous one, and it can compare a lot with a reference pattern. The free base and the hydrochloride pack differently, so a pattern match also says something about the form.
Diffraction does not measure purity and does not identify the counter-ion. Request the reference pattern and the method's detection limit before accepting a “match” statement. It is not a routine release test here; its value is in a dispute or in a solid-form question such as a hydrate, a different crystal habit or an amorphous carrier.
A different polymorph does not change the label, but it can change flow, dissolution and capsule behaviour. That is a process question, not an identity failure, and it belongs in the specification only if the dosage form is sensitive to it.
What substitution looks like
| Substitute | What changes | Signal | Test |
|---|---|---|---|
| DL- or D-ornithine | Optical purity falls | Rotation near zero or below the window | Polarimetry, chiral HPLC |
| L-arginine | Different mass and retention | Rotation above the window; extra peak | HPLC, polarimetry, pH |
| L-citrulline or L-lysine | Similar rotation or basicity | Retention differs; assay profile changes | HPLC, related substances |
| Hydrochloride | Lower pH; chloride present | pH below 9.0; chloride positive | pH, chloride, assay as ornithine |
| Glycine or maltodextrin | Dilution | Low assay; rotation pulled down; LOD moves | Assay, polarimetry, loss on drying |
| Moisture | Water, not ornithine | LOD high; dried-basis assay normal | Loss on drying |
Colour does not help here: the base and the salt are both white to off-white, and a dilution can match the shade. The useful signals are the angle, the pH, the chloride result and the chromatogram.
What to write into the specification
- “L-ornithine free base only; CAS 70-26-8; C5H12N2O2. The hydrochloride is a separate material.”
- “Assay by HPLC: 98.5–101.5%, with the basis stated.”
- “Identification by IR and HPLC retention; specific rotation +22.0° to +24.0° on the dried basis, with conditions.”
- “Loss on drying ≤0.5%; pH (1% solution) 9.0–11.0.”
- “Chloride reported where the form is to be confirmed analytically.”
- “No D-ornithine or other amino acid above the stated limit; related substances by HPLC.”
- “Mesh: at least 95% through 40 mesh; metal panel and micro counts as listed.”
Five questions for the supplier
- What form does this lot carry, and what CAS number is printed on its certificate?
- Can you supply the IR spectrum and HPLC chromatogram, not just the assay figure?
- Which specific rotation was measured, and with what solvent, concentration and temperature?
- What pH and chloride result did this lot give?
- If the lot is disputed, will you re-test the retention sample jointly?
A file built from those five answers is an identity case; one assay figure is not. The catalog sheet is on the product hub; the COA page shows where each figure sits; the grades page compares the forms; the ornithine versus arginine page explains the structural difference; the HPLC note describes the separation and the quality page the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation