01 COA & batch testing

What the COA for L-histidine actually contains

Technical document 01 · Reviewed 2026-11-19 · L-Histidine

On this page
  1. The certificate as a test report
  2. The HPLC assay, its basis and the rotation
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

An L-histidine certificate answers four questions: what the lot is, how much histidine it contains, which enantiomer was measured, and whether the powder is the free base or a salt. The catalog reports IR and HPLC identification, assay by HPLC on the dried basis, specific rotation, loss on drying, pH, particle size, heavy metals and microbiology. Those figures are the catalog specification; the batch COA confirms one pouch or drum.

In one line

The assay measures how much histidine is present; the rotation and the pH establish which form it is, provided the method and the solvent are named.

The certificate as a test report

A certificate is useful when it can be audited line by line. Each parameter needs the test, the method that produced the number, and the limit the lot was released against. A row that says only “conforms” asks the reader to accept a conclusion without the evidence behind it.

Identity, assay, moisture and form · L-histidine free base
ParameterMethodRelease limit
AppearanceVisualWhite crystalline powder
IdentificationIR and HPLC against a referenceConforms
AssayHPLC, dried basis98.5–101.5%
Specific rotationPolarimetry, dried basis−38.0° to −41.0°
Loss on dryingGravimetric≤0.5%
pH (1% solution)Potentiometry7.0–9.0
Physical, contaminant and microbiological limits
ParameterMethodRelease limit
Particle sizeSieve analysis≥95% through 40 mesh
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

The pH line is not a formality. A 1% solution of the free base sits between 7.0 and 9.0 because the imidazole ring is only partly protonated; a solution in the acidic range points to the hydrochloride or to an acid residue.

The HPLC assay, its basis and the rotation

The catalog assay is by HPLC on the dried basis. The pharmacopoeial assay for L-histidine is a non-aqueous titration with perchloric acid, also calculated on the dried basis against a 98.5–101.5% window. Either method can be valid, but the numbers are not interchangeable: one measures a chromatographic peak, the other a titratable acid. The certificate should name the method and put the basis in the assay row rather than in a footnote.

Detection deserves its own line. The imidazole ring absorbs weakly at 254 nm, so an HPLC method usually runs at a low ultraviolet wavelength, uses a derivatisation step, or separates the amino acid by ion exchange with ninhydrin or mass detection. A certificate that gives a percentage and no method leaves the reader unable to tell which of those was used.

The dried basis is a correction, not a measurement. A lot at 99.0% as-is with 0.4% loss on drying calculates to 99.40% on the dried basis. The 0.5% loss-on-drying limit keeps the correction small, but it is not zero, and a humid filling room can move it.

Specific rotation is the chiral measurement, and it is solvent-dependent. The catalog window is −38.0° to −41.0° on the dried basis. The free base in water reads about −39°, while the pharmacopoeial method measures the same L form in 6 N hydrochloric acid at 110 mg/mL and expects +12.6° to +14.0°. Both can describe L-histidine. A rotation printed without solvent, concentration, path length and temperature cannot be compared with another certificate, and a racemate reads near zero under the same conditions.

Release limit versus batch result

The release limit is the gate; the batch result is what the laboratory measured. They belong in separate columns, with the method beside each. A result column filled with the specification range proves only that the template was completed.

What the result column should contain
ParameterRelease limitResult column
Assay98.5–101.5% dried basisA measured percentage, with method and basis
Specific rotation−38.0° to −41.0° dried basisA measured angle, with solvent and concentration
Loss on drying≤0.5%A measured percentage
pH7.0–9.0 (1% solution)A measured pH, with the concentration
Heavy metalsPer elementA measured figure in mg/kg for each element

A rotation just inside the window leaves little room for method variation, and a pH at the bottom of the window is worth a check for an acid residue or a salt fraction. Neither is an automatic rejection, but each is a question before the lot is accepted. The catalog certificate does not carry a chloride line, and that is the first additional test when the form is disputed: the free-base monograph limits chloride to 0.05%, while a hydrochloride monohydrate carries about 16.9% chloride by theory.

What moves between batches

Moisture moves first. The free base is hygroscopic enough that an open pouch gains water in a humid room, and the dried-basis assay hides the gain until the as-is weight is checked. Colour moves with the drying step and with trace-metal exposure; a cream or tan tint on a white powder is worth a question about the dryer and the contact surfaces.

Particle size moves with milling and sieving, so the 40 mesh figure can change without any change in the chemistry. The rotation should not move if the material is the L form and the conditions are held; a slow drift across lots suggests a change in source or purification. Histamine is one decarboxylation step from L-histidine. The catalog specification does not set a histamine limit; a buyer who needs one should write it into the specification with a method and a limit.

When to order an outside test

Use an outside laboratory for a new source, a first shipment into a regulated market, a form claim the supplier's certificate cannot prove, an enantiomer question, or a disputed result. The panel is polarimetry with the conditions stated, chloride by ion chromatography or titration, an amino-acid HPLC profile, IR against a reference, ICP-MS for the metals, loss on drying and microbiology.

Add chiral HPLC when the rotation is at the edge of its window or a racemate is suspected, LC-MS/MS for histamine when a limit applies, and XRD when the question is the solid form rather than the assay. Ask for the detection limit of each screen: a “not detected” entry without a limit describes the method, not the drum. The sample tested should be the sample retained, and the report should identify the lot.

What to compare between suppliers

Put six lines side by side: the form as named; the assay with its method and basis; the specific rotation with its solvent and concentration; pH; loss on drying; and chloride. Two quotations that agree on the assay and diverge on the other five are not describing the same powder. The lot code should appear on the certificate, the pack and the retained sample, and the certificate should name the producer, not only the trader.

The catalog specification sits on the L-histidine product page. The form comparison is on the grades page; the tests that separate the free base from the salt are on the identity page; the release workflow is on the quality page; the chromatographic method is described in the methods section.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation