04 MOQ & ordering

L-Glutamine: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · L-Glutamine

On this page
  1. The 1 kg floor and what it buys
  2. The packs and what each one protects
  3. Lead time
  4. Six lines a quotation has to carry
  5. Samples
  6. Where this page stops

An L-glutamine order starts at 1 kg, packed in a sealed foil pouch, and the standard production pack is a 25 kg fiber drum with an inner liner. The catalog window is 1–7 days, counted from confirmation of both the specification and the order. A quotation needs six lines: form and mesh, specification, quantity and pack, destination and delivery term, documents, and any sample or outside test.

In one line

The minimum is one kilogram because that is the smallest unit that still carries a lot identity; everything else is pack, mesh and destination.

The 1 kg floor and what it buys

One kilogram is enough for a bench trial, a second trial after the formula changes, and a retained sample that outlasts the project. It is also the smallest pack that can carry a lot number, a certificate and a sealed seam without being repacked by hand. Below that, the material becomes a hand sample rather than a released lot, and a hand sample cannot justify a label decision or a supplier comparison.

The arithmetic is easy to check. A 1 kg pouch fills about 2,000 capsules at a 500 mg fill of L-glutamine, or about 1,000 at 1,000 mg, before any loss to the machine. A pilot batch that needs 5 kg is five pouches; a 25 kg batch is one drum. The pack changes the handling: pouches are opened one at a time, while a drum is opened once and then resealed. Because the minimum is set per form and per pack, a mixed order is quoted one line at a time.

A buyer who needs 500 g should ask for a sample, not a split pouch: a split pouch loses the factory seam and lot label, and the saving does not justify a release that cannot be documented.

The packs and what each one protects

Standard packs · L-glutamine
PackNet weightConstructionTypical useWatch
Foil pouch1 kgFoil laminate with sealed seamsBench trial, pilot batch, retained sampleThe seal is the barrier; a folded top is not a seal
Fiber drum25 kgFiber drum with an inner linerProduction batchThe liner, not the fiber wall, keeps the water out

Because the powder is hygroscopic, the pack belongs in the specification. A pouch that has been opened and folded closed is no longer sealed, and a drum opened for a partial weigh-out is no longer a controlled environment unless the liner is closed again. The pack label should carry the product name, form, lot number, net weight and pack date, and the lot number should match the certificate.

A desiccant can be specified where the destination climate or the storage time calls for one, but it backs up the liner rather than replacing it. If a desiccant is required, say so on the order; it is not added by assumption.

Lead time

The 1–7 day window runs from two confirmations: the specification and the order. A quotation is not a confirmation, and an order placed against a different specification starts a new clock. If the material is held in the standard pack, the window is short. For an 80 mesh or granulated grade, the clock starts when that step is scheduled, not when the enquiry lands.

Documents run on a parallel clock. A shipment into a market that wants a certificate of origin, a safety data sheet in a local format or a third-party certificate will not move on the commercial documents alone. Agree the document list before the order is confirmed, and allow for the destination's public holidays and the forwarder's cut-off. A short production window does not compensate for a document that arrives after the vessel has sailed.

Six lines a quotation has to carry

Six lines make a quotation complete and make two quotations comparable. A quotation that names only “L-glutamine 99%” and a quantity is not comparable with one that names a form, a basis and a pack, because the two may describe different materials.

  1. The form and the mesh: L-glutamine, not the dipeptide; 40 mesh standard, 80 mesh milled or granulated on request.
  2. The specification and its version: assay basis and method, specific rotation, loss on drying, pH, particle size, heavy metals and microbiology.
  3. The quantity and the pack: the number of 1 kg pouches, 25 kg drums or both, and whether a desiccant or a particular liner is required.
  4. The destination and the delivery term, so that freight, documents and risk are quoted on the same basis.
  5. The documents: certificate of analysis, specification, safety data sheet, origin and allergen statements, and any market-specific declaration.
  6. Any sample or additional test: a sample drawn from the offered lot, a third-party rotation, a chiral check or a micro test.

Samples

Draw the sample from the lot that will actually be offered, not from a separate sample shelf. The sample bag and the certificate should carry the same lot number, and the sample should have been taken at packing rather than scooped from an opened drum. The quantity should cover the trial plus a retained portion, because the buyer's laboratory will need both and a second request takes another week.

The sample is also the chance to see what no certificate shows: flow, dissolution speed, caking after a week on the bench, and colour against the previous lot. Those observations are a small effort compared with a rejected drum. Keep the sample sealed between checks and record the room humidity; a fair comparison needs the same conditions for both suppliers.

Where this page stops

The quotation carries the commercial terms; this page covers the minimum, the packs and the lead time. Three limits belong in the purchase order. The specification is what the lot is released against, so a new mesh, water limit or form means a new specification and a new quotation. The certificate travels with the lot; its lot number, the pack and the invoice should agree. And a form claim is only a claim if it is documented: if the label says L-glutamine, the order should require L-glutamine, not the dipeptide that carries a similar glutamine figure.

The remaining shelf life on arrival belongs in the terms as well. A lot that is correct at release can arrive with most of its assigned life gone, and the buyer carries that loss. Agree the minimum remaining life before the order is placed, and ask for the storage conditions the assignment assumes. The pack is described on the stability page, the release tests on the COA page, and the forms on the grade page. The market requirements are on the compliance page, the product page carries the catalog specification, and MOQ and lead time are defined in the glossary.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation