L-glutamine or L-alanyl-L-glutamine: choosing a grade
L-glutamine is the free amino acid; L-alanyl-L-glutamine is a dipeptide of alanine and glutamine. They are different label ingredients with different molecular weights, different solubility and very different behaviour in water. The free form suits dry capsules, tablets and dry blends where the label names L-glutamine, while the dipeptide suits aqueous or heat-processed formats where the free amino acid would cyclise. A change of form changes the label, the mass per serving and the stability file, not only the assay figure.
The free amino acid and the dipeptide are not interchangeable: one is a label name, the other is a different molecule with its own mass, solubility and regulatory file.
The label decides before the assay
Both carry glutamine, but they are not two grades of one substance. L-glutamine has the formula C5H10N2O3 and the CAS number 56-85-9. L-alanyl-L-glutamine has the formula C8H15N3O4 and the CAS number 39537-23-0. A product whose ingredient list says L-glutamine and whose powder is the dipeptide has a labelling defect before it has a quality defect.
Within the free form, “grade” also refers to the physical state: the catalog powder is crystalline at ≥95% through 40 mesh, with milling to 80 mesh and granulation available on request. Those changes affect flow and fill, not identity; mesh is a handling choice, while free form versus dipeptide changes the ingredient.
Two molecules compared
| Property | L-glutamine | L-alanyl-L-glutamine |
|---|---|---|
| CAS number | 56-85-9 | 39537-23-0 |
| Formula | C5H10N2O3 | C8H15N3O4 |
| Molecular weight | 146.15 g/mol | 217.22 g/mol |
| Glutamine per gram | 1.00 g on a dry basis | 0.67 g, calculated |
| Label name | L-glutamine | L-alanyl-L-glutamine |
| Water behaviour | Hygroscopic; cyclises in solution | More soluble; resists cyclisation |
The 0.67 figure is arithmetic, not a certificate result: 146.15 divided by 217.22 is 0.673. A dipeptide lot still needs its own assay and identity tests, and a glutamine assay run on the dipeptide is not the same measurement as an assay of the dipeptide. The conversion does not replace the certificate.
Solubility, stability and the pH question
Free glutamine is freely soluble in water, and the 5% solution is slightly acidic at pH 5.0–6.5. In solution the free amino acid can cyclise to pyroglutamic acid with the release of ammonia, and the rate rises with heat and with pH away from the stable range. A dry powder is more stable, but it is hygroscopic: water taken up in an opened pack starts the same reaction slowly and causes caking.
The glutamine residue's alpha-amino group is tied up in the peptide bond, blocking the cyclisation route. An aqueous solution therefore retains the glutamine residue longer, and the material is more soluble at the same temperature. Those properties are why the dipeptide appears in liquid formats and hot aqueous steps, and why its stability cannot be read from the free amino acid's data.
Particle size belongs to the free form. A 40 mesh crystal flows differently from an 80 mesh powder, and a granulate flows differently again. The dipeptide has its own particle-size distribution, and the mesh of one material says nothing about the other.
What the form does to the capsule or stick
Dry capsules, tablets and dry blends are the natural home of free L-glutamine. A sealed pack controls the water, so a capsule or stick pack can carry the label amount without putting the amino acid into solution. The filling line still has to control humidity, and a low-dose blend may need the 80 mesh grade.
Liquids, ready-to-drink formats and processes with a hot aqueous step point toward the dipeptide. The higher solubility allows a more concentrated solution, and the blocked alpha-amino group reduces the cyclisation that limits the free form. The trade-off is mass: a label that declares 5 g of glutamine needs about 7.4 g of dipeptide, and that difference can change the serving size, the stick weight or the number of capsules.
Convert before the fill weight is fixed. One gram of glutamine is delivered by about 1.49 g of dipeptide, and one gram of dipeptide delivers about 0.67 g of glutamine. A formula that was built around 1,000 mg of free glutamine becomes about 1,490 mg of dipeptide for the same glutamine figure. The capsule shell, excipient load and taste need checking at that weight.
What the specification has to name
The free form's specification is the one on the product page: assay 98.5–101.5% on the dried basis by HPLC, specific rotation +6.3° to +7.3°, loss on drying ≤0.5%, residue on ignition ≤0.3%, pH 5.0–6.5 at 5% and ≥95% through 40 mesh. Those lines describe L-glutamine and do not transfer to the dipeptide.
A dipeptide specification names L-alanyl-L-glutamine, its own CAS number and its own assay method, and it should state the glutamine content that the label calculation will use. The identity tests, the rotation and the impurity profile are the dipeptide's, not the free amino acid's. If the buyer intends to declare “glutamine” on the label while using the dipeptide, the label needs its own review, because the ingredient is not the same substance.
An order for “L-glutamine 99%” does not authorise delivery of the dipeptide, and an order for the dipeptide should not be released against a free-glutamine certificate. Name the form, the CAS number and the label name on the order, and ask the supplier to confirm all three on the certificate.
When a switch is the wrong move
Do not switch forms to solve a fill or stability problem without re-checking the label, the serving size and the regulatory file. If the label names L-glutamine, the dipeptide is a different ingredient and the label has to change. If the market file covers only the free amino acid, the dipeptide's status there is a separate question that the supplier's free-form documentation does not answer. If the analytical method was validated for free glutamine, it may not separate or quantify the dipeptide.
The free form also remains the simpler choice for a dry capsule where mass is tight, because it carries the full glutamine figure per gram. The dipeptide earns its place where water or heat would otherwise degrade the free amino acid. That is a formulation decision with a stability study behind it, not a like-for-like substitution at the weigh-out.
The two forms are compared in more detail on the glutamine versus dipeptide page. The water and heat question is followed through on the stability page, the label and market rules on the compliance page, and the identity tests on the identity page. The product page carries the free-form specification, and the release tests are set out on the COA page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation